Used Hold Her Sprint for sale (8,670)

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Kdedpfxjy N Rihe Aqist Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. Kedpfx Aqeu R Syijisdt HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 machining center - used Throughfeed processing, 4-sided profiling possible, integrated vacuum pump, automatic vacuum positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, Kdsdjyrp Sropfx Aqijt XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, central lubrication system, automatic ----- Technical Data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: CAMPUS HOPS, main spindle motor power: 6.5 kW, main spindle speed: 1,000 - 18,000 rpm, main spindle mounting: HSK-F63, drilling unit motor power: 1.7 kW, drilling spindle mounting: M10, interference fit 11 mm, number of vertical drilling spindles: 13 pcs., no. of horizontal double drilling spindles in X direction: 2 pcs., no. of horizontal double drilling spindles in Y direction: 1 pc., saw blade diameter of saw unit: 120 mm, number of tools in tool changer: 6 pcs., extraction connection diameter: 2 x 120 mm + 1 x 140 mm, required volume flow: 4,100 m³/h, required static negative pressure: 2,500 - 3,000 Pa, required air velocity: 30 m/s, compressed air connection: 6 bar, compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Kjdpfjy T D N Aex Aqijdt Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier Ksdpou R Sy Aofx Aqiedt - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: excellent (used), HOLZ-HER ProMaster 7125 machining center - used Console machine, additional connections for pneumatic clamps, pneumatic workpiece stops with double-acting cylinders, pneumatic feeding aids, hardened, dust-protected prism guides, helical toothed rack and pinion drive (X-axis), ball screw spindles on Y and Z axes, network card for remote maintenance, switch cabinet cooling with heat exchanger, handheld control unit, C-axis, A-axis, rotating disc tool changer, incl. safety fence, incl. anti-fatigue mats, pendulum operation possible, ceiling laser for positioning suction cups / workpiece, central lubrication, manual, incl. material removal simulation ----- Technical data ----- Machining length (contour milling - radius) X: max 3,605 mm, Machining length (contour milling - radius) Y: 1,335 mm, Kdodsy Uxxnjpfx Aqiet max. travel speed X: 100 m/min, max. travel speed Y: 100 m/min, max. travel speed Z: 25 m/min, max. workpiece length X: 200 mm, Machine control software: CAMPUS HOPS, Main spindle motor power: 9.5 kW (S6), Main spindle speed: 1,000 - 24,000 rpm, Main spindle arbor: HSK 63, Spindle cooling: coolant, Drilling unit motor power: 3 kW, Drilling spindle arbor: M10, Morse taper 11mm, Number of vertical drilling spindles: 10 pcs, No. of horizontal double drilling spindles in X-direction: 1 pc, No. of horizontal double drilling spindles in Y-direction: 1 pc, Number of consoles: 6 pcs, Number of tools in changer: 18 pcs, Vacuum pump capacity: 140 m³/h, Extraction connection Ø: 250 mm, required volume flow: 5,300 m³/h, required static vacuum: 2,500-3,000 Pa, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min, Dimensions incl. fence (L x W x H): 6,712 x 4,585 x 2,760 mm, Weight: approx. 3,800 kg Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: used, mileage: 99,050 km, power: 120 kW (163.15 HP), first registration: 08/2015, fuel type: diesel, overall weight: 4,600 kg, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,926 mm, total width: 1,993 mm, total height: 2,530 mm, loading space length: 3,100 mm, loading space width: 1,770 mm, loading space height: 1,550 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 1295B ----Why autonext? Over 400 vehicles (cars and commercial vehicles) immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options. Complete vehicle range available on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----1st hand, German vehicle, non-smoker vehicle Complete service history, exclusively maintained at Mercedes Benz New front and rear brakes New all-season tires on the rear Body type: Refrigerated box van ThermoKing V200-MAX Refrigerant R-404A/R-452A Optionally, we offer a cooling maintenance service from the manufacturer for only 999 euros. Trailer hitch, increased trailer load: 3,500 kg Kjdpfowbx Hrjx Aqiodt ---- Special equipment: * Hill-start assist * Trailer hitch: ball head, for increased trailer load - 3.5 t * Trailer socket 13-pin * Audio system Audio 10 (radio with CD player) * Outside temperature display * Digital tachograph, downloadable * Generator 180 A * Rear door (opening angle 270 degrees) * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Fuel tank: main tank 100 liters * Steering wheel (adjustable steering column) * Front engine drive with bracket for additional refrigerant compressor * Crossmember with integrated step * Spare wheel in driving condition * Spare wheel holder under frame end incl. jack * Rear crossmember, reinforced, with ball head * Mud flaps rear * Seat cover / upholstery: synthetic leather (driver's cab) * Seats in the driver's cab: double passenger seat * Rear stabilizer reinforced * Front stabilizer reinforced * Fleece battery 95 Ah Standard equipment: 3rd brake light, Adaptive brake light, Airbag driver's side, Anti-lock braking system (ABS), Drive type: rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Roof lining in the driver's cab, Electronic stability program (ESP), Electric windows 2-way, Transmission 6-speed - TSG (Eco Gear), Glove compartment lockable, Body/superstructure: Box, Child safety lock, Load compartment bulkhead, Load securing / lashing eyes, Headlight range adjustment, Model update, Engine 2.1 L - 120 kW CDI CAT, Particulate filter, Wheelbase 3665 mm, Smoker's package, Low emission according to emission standard Euro 5, Sliding door load/passenger compartment right, Power steering, Safety belt system with warning system (driver's side), Seats in the driver's cab: passenger seat with armrest, Seats in the driver's cab: driver's seat with armrest, Service interval indicator Assyst, Immobilizer, Heat-insulating glass, Central locking with remote control, Permissible total weight 5.00 t, Twin tires on 2nd axle / rear axle. ---- If desired, we can provide a new vehicle inspection and emissions test. ----Warranty & "TÜV Profi Check" are of course available with us! We will also gladly take your vehicle in trade! We will also create an individual financing or leasing offer for you! Without down payment, can be repaid at any time and with special repayment options. Please direct your wishes to our sales team, we will be happy to advise you. ----Arrange an appointment for a test drive and be convinced by the quality of our vehicles. Appointment arrangements: Mon - Fri from 08:30 - 18:00, Sat from 09:30 - 13:30.

Condition: used, mileage: 129,050 km, power: 120 kW (163.15 HP), first registration: 12/2019, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,246 mm, total width: 2,135 mm, total height: 2,448 mm, loading space length: 3,300 mm, loading space width: 1,850 mm, loading space height: 1,950 mm, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 9378 ----Why autonext? Kdodpfsw Dlzuox Aqiet Over 400 passenger cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----1st hand, German vehicle, non-smoking vehicle Complete service history, exclusively serviced at Mercedes Benz Body: Refrigerated box Navigation system Seat heating Body: Deep-freeze box Thermo King cooling unit V500 MAX (-20°Celsius) Refrigerant R-404A/ R-452A Standby cooling + engine cooling Optionally, we offer a cooling maintenance service from the manufacturer for only 899,- Euro. Portal doors Side door Rear step ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Steering wheel with multi-function buttons * Trailer socket 13-pin * Suspension: Stabilization Level II * Connection block for electrical connections (driver's seat compartment) * Fuel filter with water separator * Front engine PTO with bracket for additional coolant compressor * Navigation system for MBUX multimedia system * Seats in the cab: Double co-driver's seat * Seats in the cab: Heated driver's seat * Fleece battery 92 Ah * Reinforced front axle Standard equipment: Storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye on the rear, adaptive brake light, driver's airbag, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, headliner in the cab, automatic activation of headlights, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: active brake assist, driving assistance system: crosswind assist, driving assistance system: lane-keeping assist, digital tachograph, downloadable, power windows electric 2-way, 6-speed transmission - TSG (Eco Gear), body/structure: platform, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, marker lights on the side, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI CAT, particulate filter, wheelbase 3665 mm, low emissions according to Euro 6 emission standard, safety belt system with warning system (driver's side), seat cover / upholstery: fabric, seats in the cab: driver's seat with armrest, seats in the cab: driver's seat adjustable, daytime running lights, rear underrun protection, service interval display Assyst, immobilizer, heat-insulating glazing (windshield with band filter at the top), central locking with remote control, permissible total weight 5.00 t. ----MOT/inspection can be renewed upon request. ----Warranty and "TÜV Profi Check" are of course available with us! We will gladly accept your vehicle in part exchange! We will also prepare an individual financing or leasing offer for you! Without down payment, redeemable at any time and with special repayment options. Please direct your requests to our sales team, we will be happy to advise you. ----Arrange an appointment for a test drive and be convinced of the quality of our vehicles.

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Kdedpfxozq E Hbe Aqiet Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Kjdpfx Ajzx Sxgsqijdt Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Kjdpfx Asx Emf Deqiodt Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Kdjdpfx Asx E Ah Ijqijt Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, HOLZ-HER Edgebanding Machine ARTEA 1030 - TRADE SHOW MACHINE Edge thickness, coil material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling - Edge feeder - LR101 gluing system - glue application roller (Teflon-coated) - Pressing unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Pneumatic surface scraper - Buffing unit - Spray device in the infeed and outfeed areas 12 months warranty Delivery, installation, and machine instruction can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb. Kdodpfx Aszg Axtoqijt

Condition: new, Year of construction: 2026, functionality: fully functional, HOLZ-HER edge banding machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed rate: 9 m/min. Glue application in PUR & EVA qualities, easily achieved thanks to the HOLZ-HER GluJet adhesive application system. All common edge types, including solid wood edges up to 5 mm. Kedpfezgu Dnjx Aqiedt Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling cutters - Edge feeder - GluJet GJ201 adhesive application system - Material buffer - Glue collecting container - Automatic reloading function - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraper unit - Pneumatic surface scraper - Buffing unit - Spray system in the infeed and outfeed area 12 months warranty Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Kjdpfeyfgrpjx Aqisdt Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit IntelliSet - tool correction fa.s.t. - Set-up on the fly Kdjdpfex E A Disx Aqiot iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. In the event of discrepancies between the German and a foreign language version, only the German version is binding. Our Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, mileage: 108,050 km, power: 120 kW (163.15 HP), first registration: 01/2020, fuel type: diesel, overall weight: 5,000 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,946 mm, total width: 2,135 mm, total height: 2,451 mm, loading space length: 4,200 mm, loading space width: 2,300 mm, loading space height: 2,100 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 8969 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively serviced at Mercedes-Benz Next service in 365 days Rearview camera Body: Insulated box van Standby cooling + engine cooling ThermoKing cooling unit V200 MAX model 50 Refrigerant: R-404A / R-452A Optionally, we offer a cooling maintenance service from the manufacturer for only €899. Hydraulic tail lift "Bär" (750 kg) Partition in the cargo area Portal doors Side door Rear entry aid ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the headliner * 2nd battery (auxiliary battery) inside * Passenger-optimized center console (without storage compartment on the right) * Suspension: Stabilization level II * Folding cover for storage compartment * Terminal block for electrical connections (driver's seat box) * Fuel filter with water separator * Radiator grille frame in vehicle color * Front power take-off with bracket for additional coolant compressor * Windshield wipers with rain sensor * Front mud flaps * Seats in the cab: Double passenger seat * Seats in the cab: Comfort suspension seat, driver's side * Separate relay for additional battery * Rear wall lining * Fleece battery 92 Ah Standard equipment: Storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye at the rear, adaptive brake light, driver's airbag, anti-lock braking system (ABS), traction control system (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, exterior temperature display, roof lining in the cab, automatic headlight activation, electronic brake force distribution (EBV), electronic stability program (ESP), driver assistance system: active brake assist, driver assistance system: crosswind assist, driver assistance system: lane keeping assist, digital tachograph, downloadable, electric windows 2-fold, 6-speed transmission - TSG (Eco Gear), body/structure: flatbed, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 2.1 liters - 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, low emissions according to Euro 6 emission standard, safety belt system with warning system (driver's side), seat cover / upholstery: fabric, seats in the cab: driver's seat with armrest, start/stop system, daytime running lights, underrun protection at the rear, preparation for DAB radio reception, service interval display Assyst, immobilizer, heat-protective glazing (windshield with band filter at the top), central locking with remote control, permissible total weight 5.00 t. ----Inspection/emission test can be done upon request. ----Warranty and "TÜV Profi Check" are of course available! We will also gladly take your v Kdedpfx Aqsw Eg E Djiet

Condition: used, mileage: 109,050 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,046 mm, total width: 2,035 mm, total height: 2,293 mm, loading space length: 3,400 mm, loading space width: 1,850 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 4697 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Full range of vehicles available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Mercedes-Benz Next service in 644 days New brake pads front and rear Automatic transmission Body type: Refrigerated box van Thermo King V500 MAX (-20°Celsius) Refrigerant R-404A Standby cooling + engine cooling Optionally, we offer a cooling maintenance service from the manufacturer for only €899. Multimedia system MBUX (7" touchscreen) Navigation system for multimedia system MBUX Speed limiter (cruise control) Active lane keeping assist Traffic sign recognition Attention Assist (driver fatigue detection) Inductive charging cradle for smartphone (wireless charging) Controlled air conditioning (Tempmatik) Instrument cluster with color display Comfort driver's seat Rear portal doors ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the headliner * 2nd battery (auxiliary battery) inside * 3-button remote control for central locking * Acoustic package * Trailer socket 13-pin * Armrest, driver and passenger door * Battery disconnect switch 1-pole * DAB tuner (digital radio reception) * Driver assistance system: Active lane keeping assist * Driver assistance system: Attention Assist (driver fatigue detection) * Driver assistance system: Traffic sign recognition * Suspension: Stabilization level II * Parking brake, electric * All-weather floor mats * Generator 250 A * Speed limiter (cruise control) * Cup holders in front * Grab handle passenger double seat (inside seat) * Grab handles A-pillars * Additional main key * Inductive charging cradle for smartphone (wireless charging) * Folding cover for storage compartment * Folding cover for storage compartments left/right * Connection strip for electrical connections (driver's seat box) * Controlled air conditioning (Tempmatik) * Instrument cluster with color display * Fuel tank: Main tank 93 liters * Charging package dashboard (USB connections and 12V socket additionally) * Front PTO with bracket for additional refrigerant compressor * Navigation system for multimedia system MBUX * Fog lights with cornering lights * Wheel arch covers * Smoker's package * Spare wheel with road tires * Spare wheel carrier under the end of the frame incl. jack * Windshield wiper with rain sensor * Mud flaps in front * Safety belt system with warning system (passenger side) * Seat equipment: Comfort headrest, driver's seat * Seats in the cab: Passenger double seat * Seats in the cab: Comfort driver's seat * Seats in the cab: Driver's seat with lumbar support * Lockable storage compartment in storage above the windshield * Socket (12V connection) in the cab * Fuel filler cap red * Separation relay for battery additionally * Underrun protection rear Ksdpfsyg T Rhox Aqijdt * USB connection in the center under the dashboard (charging function only) * Trim

Condition: used, mileage: 257,050 km, power: 120 kW (163.15 HP), first registration: 07/2021, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,850 mm, total height: 3,250 mm, loading space length: 4,200 mm, loading space width: 2,050 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle number: 7355B ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle selection on autonext - Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good, well-maintained condition. 1st owner, German vehicle, non-smoking vehicle. Complete and consistent service history, exclusively at Mercedes-Benz. Body: Maxi refrigerated box van ThermoKing V500 MAX refrigeration unit Refrigerant R-404A / R-452A Standby cooling + engine cooling Optionally, we offer you a refrigeration service from the manufacturer for only 899,- Euro. Hydraulic tailgate (750 kg) Payload 2,030 kg Permissible total weight 5,500 kg Loading area: Length 4.20m / Height 2.20m / Width 2.05m Rearview camera Navigation system Regulated air conditioning (Tempmatik) ---- Special features: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the dashboard, passenger side * 2nd battery (auxiliary battery) interior * Acoustic package * Exhaust pipe in front of the rear axle, left * Extended exterior mirror base, left/right * Battery disconnect switch, 1-pole * DAB tuner (digital radio reception) * Vehicle without start/stop system Kdodpfx Aqoxdm Dzeiot * Generator 250 A * Speed limiter 90 km/h * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Front engine drive with carrier for additional coolant compressor * Navigation system for MBUX multimedia system * Seats in the driver's cab: Double passenger seat * Separation relay for additional battery * Reinforced front axle Standard features: Storage compartment above the windshield, Adaptive brake lights, Airbag driver side, Anti-lock braking system (ABS), Anti-slip regulation (ASR), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior temperature display, Roof lining in the driver's cab, Automatic activation for driving lights, Electronic brake force distribution (EBV), Electronic stability program (ESP), Driving assistance system: Active brake assist, Driving assistance system: Crosswind assist, Driving assistance system: Lane keeping assist, Digital tachograph, Suspension: Stabilization Level II, Electric window lift 2-fold, Gearbox 6-speed - TSG (Eco Gear), Body/structure: Standard platform body, Keyless start, Communication module (LTE) for digital services, Fuel tank: Main tank 71 liters, Steering wheel (steering column mechanically adjustable), Headlight range adjustment, Truck registration, Side marker lights, Mercedes-Benz emergency call system, Engine 2.1 liters - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Low emissions according to emissions standard Euro 6, Safety belt system with warning system (driver's side), Seat cover / upholstery: Fabric, Seats in the driver's cab: Driver's seat with armrest, Seats in the driver's cab: Driver's seat adjustable, Daytime running lights, Underrun protection rear, Fleece battery 92 Ah, Maintenance interval display Assyst, Immobilizer, Heat-insulating glazing (windshield with band filter at the top), Central locking with remote control, Permissible total weight 5.00 t. ----MOT/technical inspection upon request

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Kdedswt E Tvjpfx Aqiot Location: Flörsheim

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. Kedpjw I Ug Hsfx Aqijdt All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Kdjdpfew Nac Asx Aqiet Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Ksdpfx Aqjw I U E Ajiedt Location: Flörsheim Availability: Short-term

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Kdedpjw Nad Hjfx Aqiet Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Kdjdpfezik R Aox Aqist