Used Hole Disc for sale (9,179)

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Kdjdpfx Aoyilgdjbvsi Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Kdsdpfx Abovyurcevsi Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Kjdpfxoyrqubj Abvjdi

Condition: used, maximum load weight: 32,330 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 04/2012, next inspection (TÜV): 02/2027, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2012, Refrigeration unit brand: Thermo King Additional information: * Unladen weight: 8,670 kg * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 30% * Tyre tread depth inner right | First axle: 30% * Maximum axle load | First axle: 9,000 kg * Tyre size | Second axle: 385/65 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth inner left | Second axle: 30% * Tyre tread depth inner left | Third axle: 30% * Tyre tread depth inner right | Second axle: 30% * Tyre tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Third axle: Disc brakes Additional equipment: * Rear doors * Homepage * Tail lift ('Laadklep') * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures specific to your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Ksdpfx Abjylf Rksvsdi Disclaimer: Specifications subject to change, intermediate sale, and errors excepted. --- Listed prices do not include BPM and are valid only for export.

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm Kdjdpfx Aewcldaobvoi B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit Kedpfx Aboqv Ey Uovedi electro-pneumatic push-rod drilling unit various types 2 units RPM 1C, 0.73 kW – €450 each 1 unit RPM 0.5C, 0.37 kW – €400

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Kdsdpfx Abephvl Tjvsi Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, machine/vehicle number: WFDFLT33902010193, axle configuration: 3 axles, first registration: 07/2013, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2013, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes = More information = Tyre size: 385/65 Make axles: BPW Kjdsx Sdg Eepfx Abvodi Tyre profile: 30% Brakes: disc brakes Suspension: air suspension

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Weight 110 kg Total power requirement 0 kw Kdjdpfx Asv A Hm Rsbvji

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 full drilling 5-40 mm Kdsdpfx Absd S Ualovsi Drilling depth 1.000 mm

Condition: used, Year of construction: 2019, Travel paths X/Y (mm): 300 x 200 Max. worktable size (mm): 350 x 250 Max. workpiece height (mm): 200 W-axis travel (mm): 350 Kedpfx Aboyvkqlevjdi Z-axis travel (mm): 200 Max. workpiece weight (kg): 150 Electrode diameter (mm): 0.3 - 3.0 Max. amperage: 25 amp Max. power consumption: 3.8 KVA Machine weight (kg): 850 Machine dimensions (mm) (W)1000 x (H)2000 x (L)1100

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm - 3 rows of pawls before the blades - 1 row of pawls after the blades Kjdpfx Abex E Shwsvodi - Dimensions (L/W/H): 6010 x 1500 x 2000 mm - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,780 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,780 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR certified - EBS (Electronic Braking System) - Air suspension - Disc brakes = Remarks = Very nice 2003 BURG 20FT/30FT ADR swap chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR approval (EXII, EXIII, FL, OX, AT), suitable for 1x20FT or 1x30FT, unladen weight: 3,840 kg, permissible total weight: 39,000 kg, tire size: 385/65-R22.5 (Tread depth left: 13/10/11 mm; Tread depth right: 13/7/8 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 50% Weights Unladen weight: 3,840 kg Payload: 35,160 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: BURG BPO 12-27 CCXGX Condition Technical condition: very good Visual condition: very good Identification Kedpfx Aeyk Hw Nebvjdi License plate: OH-18-GB Further information Please contact Arne Honingh for more details.

Condition: excellent (used), axle configuration: 3 axles, first registration: 10/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,780 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS - Air suspension - Disc brakes = Notes = Very nice 2003 BURG 20FT/30FT ADR swap chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR approval (EXII, EXIII, FL, OX, AT), suitable for 1x20FT or 1x30FT containers, unladen weight: 3,840 kg, gross vehicle weight: 39,000 kg, tire size: 385/65-R22.5 (tread depth left: 8/13/8 mm; tread depth right: 11/6/9 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; tire tread left: 50%; tire tread right: 70% Rear axle 2: Max. axle load: 9,000 kg; tire tread left: 80%; tire tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; tire tread left: 50%; tire tread right: 55% Weights Unladen weight: 3,840 kg Payload: 35,160 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: BURG BPO 12-27 CCXGX Kodpsyk Hvlofx Abvodi Condition Technical condition: very good Visual condition: very good Identification Registration: OH-54-HV Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Very nice 2003 BURG 20FT ADR swap chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR certification (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread left: 7/10/15 mm; tread right: 13/6/15 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 95% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 75%; Tire tread right: 50% Weights Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Kdodpfx Absyk Hk Novei Identification Registration number: OH-10-FS Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 2 axles, first registration: 02/2009, loading space volume: 25 m³, total length: 9,150 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 445/65 R22,5, Year of construction: 2009, = Additional options and accessories = - Air suspension - Disc brakes = Remarks = TRANSPORT TO ANTWERP €590 = Further information = Axle configuration Tyre size: 445/65 R22.5 Axle brand: ROR Brakes: Disc brakes Suspension: Air suspension Ksdpfxeyl An Te Abvsdi Weights Unladen weight: 6,160 kg Payload: 26,840 kg Gross vehicle weight: 33,000 kg Functional Hoses: Yes Condition Technical condition: Very good Visual condition: Very good

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 9,780 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 7,780 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS - Air suspension - Disc brakes = Remarks = Very nice 2003 BURG 20FT/30FT ADR swap chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR certification (EXII, EXIII, FL, OX, AT), suitable for 1x20FT or 1x30FT containers, unladen weight: 3,840 kg, gross vehicle weight: 39,000 kg, tire size: 385/65-R22.5 (tread depth left: 10/11/7 mm; tread depth right: 10/7/9 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 60%; Tire tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 45%; Tire tread right: 55% Weights Unladen weight: 3,840 kg Payload: 35,160 kg Gross weight: 39,000 kg Kjdpfsykucaox Abvsdi Functional Body brand: BURG BPO 12-27 CCXGX Condition Technical condition: very good Optical condition: very good Identification Registration number: OH-49-FY Further Information Please contact Arne Honingh for more details.

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/2007, loading space length: 6,430 mm, loading space width: 2,480 mm, loading space height: 2,230 mm, total length: 10,100 mm, total width: 2,550 mm, total height: 3,600 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2007, Equipment: ABS, = Additional options and equipment = Kdodpfx Absylda Dovei - Air suspension = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Tyre size: 385/65 R22.5 Brakes: Disc brakes Suspension: Air suspension Unladen weight: 4,490 kg Payload: 13,510 kg Gross vehicle weight: 18,000 kg Technical condition: very good Optical condition: very good

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Very nice 2003 BURG 20FT ADR swap body chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR approval (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tyres: 385/65-R22.5 (left tread: 7/10/15 mm; right tread: 13/6/15 mm), Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle manufacturer: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 80% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 95% Weights Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Kdsdsykad Nopfx Abvsi Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-34-FN Further information Please contact Arne Honingh for more information.

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Kedpswkir Dsfx Abvedi Storage location: Nattheim

Condition: used, maximum load weight: 11,990 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 04/2010, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2010, Equipment: tail-lift, Listed prices exclude BPM (vehicle tax) and apply exclusively for export. Kedpfxoxynxle Abvedi

Condition: new, New electric scrubber-dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture: 2024 – unused, from stock Theoretical area coverage: 2000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 rpm Squeegee width: 850 mm Clean water tank capacity: 50 liters Kdodpfevvww Tox Abvsi Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing ability: 2% Battery voltage: 24 Volts, 100 AH - Battery charger 24 V - Battery 24 V, 100 AH - One cleaning brush - Two separate tanks - No traction drive, the machine is manually pushed Machine length: 1200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1350 mm Unladen weight: 160 kg Brand new – in original packaging – unused, from stock

Year of construction: 2019, condition: new, Cutting discs TYROLIT 800mm x 9mm x 100mm Kdjdpfxohga Hqe Abvsi STEEL / STEEL max : UPM - 1900 , 80m/s Price per piece 30 pieces packed in a box

Year of construction: 2020, condition: new, Cutting discs Kdjdpfehf T Tcjx Abvji PFERD 800mm x 9,8mm x 100mm 100 PT 800 R HD STEEL Price per piece 30 pieces packed in a box available quantity 150 pieces

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops Kodpfx Asyhq Aqebvodi - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition