Used Hole Washers for sale (5,814)

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Bdedexpvbtspfx Aacoi Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Bsdpfxexm S Ido Aacjdi Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Bsdpfxjw Tc Hfs Aacodi Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Year of construction: 1968, condition: used, Peddinghaus hole punch year of construction '68 Bdedpsccqwlefx Aacji Hole punch 225 B 100 GJ128 special model - large delivery With many accessories

Condition: used, 1 piece PEDDINGHAUS HYDRAULIC 502 punching machine with digital display PEHU 101 and roller conveyor approx. 10m long, as per pictures and inspection, self-dismantling required. Colour: green. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 2 + storage rack in the outdoor area. Shipping: Collection only – no shipping offered for this item! Bdodpfx Aexrcvvoacei

Condition: excellent (used), Year of construction: 2019, 2 units in stock, both were only in use for a short contract. Loading basket 1600mm by 800mm Programmable controls. Bdedpfxsramams Aacsi

Condition: excellent (used), Year of construction: 1993, Grass fitting and hole row drilling machine used, good condition Type BBM-R Year of manufacture 1993 Mach. No. 931137 Vertical drilling head 1st fitting 2nd fitting 3rd fitting Turret head for selecting the drill head Hole row drilling head with pins Bdedpfsvzb Dnsx Aacei Number of spindles in a row 15 pieces with press-in die 1 piece Stop rulers Weight: 95 kg Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as inspected

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Bdedpfsxm S Hyex Aacei Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Total weight: 2,000 kg

Condition: ready for operation (used), empty load weight: 6,000 kg, total width: 2,350 mm, total height: 2,450 mm, Type: FCN 540 gundrilling, high precision deep hole drilling movement of drillinghead: 0 600 mm movement of table (X-movement): 0 800 mm max drillingdepth: 800 mm Y-travel: 600 mm Z-travel: 450 mm table: 1100 x 600 mm Heidenhain control including Filtra high pressure cooling through spindle including tools total power: 16 kW Max drilling dia: 4-20 mm Bdjdpfxjxgv I Ij Aacoi Speed: 0 > 12 000 rpm Power on drillingspindle: 3,7 kW Total length: 3800 mm Numbre of drillingheads: 1x

Condition: ready for operation (used), Year of construction: 2004, Immediately available ex location: Start hole EDM machine Sodick Type K 1 C Year of manufacture: 2004 CNC control X – act SDS 2 Bdedpfoxqblmex Aacei Workpiece dimensions: 250/350/300 mm X/Y/Z travel: 200/300/300 mm Max workpiece weight: 100 kg C-axis indexing: 250 degrees Mos FET pulse generator Complete accessories Weight: 1000 kg Price: EUR 2,500 plus VAT ex location

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Storage location: Nattheim Bdedpfxewkir Do Aacoi

Condition: good (used), functionality: fully functional, IXION BT15 PG with base Drilling / Thread cutting machine Bsdsxtpawopfx Aacsdi

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm Bdsdpfx Aasxdttiscoi - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, total height: 2,000 mm, total length: 1,500 mm, table width: 220 mm, overall weight: 700 kg, table length: 460 mm, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned due to business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 460 x 220 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated connection: 3.8 kVA Bodpfxsxqn Hko Aacjdi Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,100 x 2,000 mm Weight: 700 kg

Condition: reconditioned (used), functionality: fully functional, Thrust wave drilling unit Bdodpfxsqv Ey Ue Aacsi electro-pneumatic thrust wave drilling unit Type RPM-S4 3 kW 2850 rpm 4 units in stock

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, The grinding machine was purchased by us in 2022 and was in operation for five months. Bodpfjxrkqhox Aacedi This grinding machine greatly helped us to be independent from external service providers. The deep hole drills could now be quickly re-sharpened in-house, which also saved us a lot of money. The necessary grinding wheels, some of them new, are included in the delivery.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 4227051519055, Offer 25361 Technical Data: - Pressing force: 500 kN - Stroke infinitely adjustable: 10 – 32 mm Bdedpfxexqdv Is Aacji - Strokes per minute: 22 – 27 1/min - Throat depth: 510 mm - Installation height: 350 mm - Drive: 400 V / 4 kW - Punching, e.g., up to 27 mm diameter in steel: 14 mm - With special punching saddle, e.g., up to 39 mm diameter in steel: 9.5 mm - Up to 90 mm diameter in steel: 4 mm - Space requirements (approx.): W 700 x H 1700 x D 1200 mm - Weight (approx.): 1150 kg - Included: Hydraulic low-pressure center punch device - Back gauge table - Foot pedal - Emergency stop button - Various punch dies and matrices

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Bjdjvcbg Sjpfx Aacjdi Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), 10 x deep hole drills make Botek 3 pieces 6,5 x 320 mm 2 pieces 10,2 x 190 mm 3 pieces 10,4 x 250 mm 1 piece 1 x 11 x 350 mm 1 piece 11 x 270 mm Weight 1,5 kg Bedpfx Ajhl Awdoacodi

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Bjdpfxjw U Uhke Aacodi Swarf Tray & Baskets Tooling, Counter Rotation

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. Bdsdjxnlflepfx Aacsi - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Bedpfx Aaewv Nq Recsdi Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: good (used), Year of construction: 1998, START HOLE EDM MACHINE (START HOLE DRILLING MACHINE) Manufacturer: AGEMA SWISS (SWITZERLAND), Model: AS 320 CNC, Year of manufacture: 1998, Bjdpoxrz Siofx Aacedi

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Bsdpfsvca Rcox Aacjdi Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Robotic, Complete-CNC Control Panel : Beckhoff CNC Movements : Z1-Axis, Z2-Axis, Workpiece clamping Feeding : Stäubli robot arm for loading, unloading and aligning Automatic Grinding Cone Dressing : Included Automatic Compensation After Dressing: Included Indurstry 4.0 Compatibility : Available Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Non-Stop Production: Achieve continuous production with robotic arm feeding, automatic dressing, and automatic compensation features, eliminating the need for constant operator oversight. Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use Complete-CNC Control Panel: Utilize a full CNC control panel that allows you to control all axes of the machine, manage robotic feeding, and perform automatic dressing with the Beckhoff control panel. Easily save all grinding programs and monitor machine working times, efficiency, and errors. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. Bdodpfou Nmi Nsx Aacoi The Zentroflex A-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors for mass-production. Additionally, the Zentroflex A-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. With 6-Axis robot arm and servo motors on all axes of the machine, Zentroflex A-series center hole grinding machines operate completely autonomously. All loading and unloading operations are performed by the robot arm. All axis movements of the machine are also performed autonomously with servo motors. Cone dressing and compensation are also performed automatically. All movements and measurements of the machine are performed from the CNC control panel. Contact us for more details.