Used Hole Washers for sale (4,839)

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2017, Vehicle no. G0123015 – Manufacturer: Kögel. * Sliding roof tarpaulin * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double twist-lock fasteners (inside) * Side sliding tarpaulin Fpodpfx Asz Dmz Del Ssn * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof tarpaulin. Financing possible. Delivery time: AVAILABLE IMMEDIATELY. Multi Lock outer frame. Technically ready for operation without further repairs. Substructure (KTL) coating with signs of wear. Valid UVV certificate. UVV documents available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, Diameter of centering pin: 60 mm Fedjb Tyrvopfx Al Sspn Diameter of bolt circle, 4 inches: 102 mm 4 threads, MK 16 Mounting surface: 128 mm Diameter of variable hole: 80 mm

Condition: excellent (used), Four-jaw chuck Arowa No.8 (28592) Fpedpfovx Acyex Al Ssn Diameter 250 mm Through hole 68 mm Weight 20 kg

Condition: used, Multiplex boards used length 1680 mm width 1250 mm board thickness 45 mm Fsdpfx Alel Uvxne Sjpn weight 68,5 kg in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: excellent (used), Indexable milling cutter Fsdjhzt E Tjpfx Al Sspn (28233) Type Gigacut AW 125-13-8 Diameter 125 mm Arbor hole 40 mm Weight 2.5 kg

Condition: excellent (used), Clamping plate made of cast iron Length 2000 mm Width 315 mm Height 90 mm T-slot width 32 mm T-slot spacing 150 mm Diameter of the 12/8 fixing holes 27 mm Fjdpfxed Tcz Se Al Sjpn Solid material

Condition: used, Year of construction: 2014, Manufacturer: N&N Model: MG-450EFW/160 Year: 2014 Condition: Used Serial Number: 1047 Stock Number: 3438J Mixer: double paddle mixer, intermeshing Capacity: 450 litres Mixing speed: 5 - 40 RPM, variable speed Fpsdjz D Dfyspfx Al Ssn Hole plate diameter: 160 mm Infeed height: 1620 mm Outfeed height: 740 mm Compressed air: 6 - 8 Bar Power: 3 x 400, 50Hz, 36.3kW Dimensions: 2350 x 1650 x 2700 mm Weight: 1815 kg With PZ-2/250 lifter for 200L tote bins, pneumatic lid and safety cover over head

Condition: like new (used), Year of construction: 2020, Chamber cleaning system Technical data: Tank capacity 800 liters Heating capacity 54 kW Basket load capacity max. 250 kg Fodezhmp Sepfx Al Sopn Basket size W 651 x D 471 x H 300 mm Bath temperature 65 degrees Celsius max. Machine color stainless steel 1.4301, polished Compact and easy-to-maintain 2-tank cleaning system (cleaning/rinsing) Combination of spray and immersion cleaning Integrated media treatment for long bath life Freely programmable 360° rotation of the cleaning basket Integrated collection tray in the frame Individual speed and nozzle control Use of standard cleaning baskets High-quality stainless steel design Ultrasonic Vacuum Weight 3200 kg

Condition: excellent (used), JBT Tipper Tie TN4200LP automatic whole muscle stuffer, netter, clipper and rucker for producing high quality hams. Extremely rare machine on the used market. Has come direct from a UK ham factory which closed in June 2026. Very well looked after since bought new in 2016. Fjdpfxjzh N Hys Al Sspn

Condition: used, mileage: 217,000 km, power: 140 kW (190.35 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 2nd battery (auxiliary battery) in cabin, 3-button remote control for central locking, overhead storage in driver's cab, Acoustic package, electrically folding exterior mirrors, exterior mirrors with blind spot assist, DAB tuner (digital radio reception), entry handle on rear right pillar, Driver assistance system: Attention Assist (drowsiness detection sensor), tachograph controls in front under overhead shelf, Suspension: Stabilization level I, fire extinguisher, vehicle without speed limiter system, rear lights partly LED, terminal strip for electrical connections (base of driver’s seat), instrument cluster with color display, chrome radiator grille, radiator grille frame in vehicle color, cable duct at rear portal, cable duct at side wall, side marker lights, metallic paint, engine PTO front with bracket for additional coolant compressor, MBUX multimedia system (10.25" touchscreen with navigation), Park Package with reversing camera, spare wheel with standard tires, spare wheel carrier under rear frame incl. jack, windshield wipers with rain sensor, LED High Performance headlights, sliding door cargo/passenger area left, rear mud flaps, Seats in driver's cab: double passenger seat, comfort sprung driver's seat, driver's seat base low, additional relay for auxiliary battery, rear door step, USB port center under dashboard (charging only), fleece battery 92 Ah, jack Additional features: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, Hill start assist, traction control (ASR), washer fluid level indicator, electrically adjustable & heated exterior mirrors (both sides), outside temperature display, automatic headlight activation, entry handle for sliding door at cargo partition, Electronic brake force distribution (EBV), Driver assistance system: Active Brake Assist, Side Wind Assist, Lane Keeping Assist, digital tachograph, rear door (opening angle 180 degrees), body/construction: standard high-roof panel van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71L, full partition wall in cargo area, steering column (mechanically adjustable), headlamp leveling system, Mercedes-Benz emergency call system, engine 3.0 L - 140 kW CDI CAT, wheelbase 3,665 mm, low emissions according to Euro 6 standard, sliding door cargo/passenger area right, driver's seatbelt system with warning device, seat upholstery: fabric, start/stop engine system, service interval display (Assyst), heat-insulating glazing (windshield with upper band filter), gross vehicle weight 3.5 t * Power steering * Partition wall * Central locking Air conditioning: Air conditioning Safety: ABS * ESP Parking aid: Camera * Rear Fpjdpsz Haxnjfx Al Ssn * Front Between wheel arches: 96 cm The vehicle is in TOP condition!!! Mercedes service history up to 160,000 km, 2 keys Financing available!

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Shipping and inspection are possible! Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Fpjdsz E Rdfepfx Al Ssn Identification & Classification Article number: 360040 10012 EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Application: For individual installation in clamping fixtures.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: D0211310W, HOLEX professional digital caliper, measuring range 0–2000 mm, item code 41 5525_2000. Professional tool for mechanical workshops, quality control, metalworking, and metrology. Fpsdpfx Aoz E Hkhol Sjn Key features: - Measuring range 0–2000 mm - Digital LCD display - mm/inch reading - ABS / ZERO / PRESET functions - Jaws for internal and external measurements - Stainless steel jaws - Jaw length approximately 150 mm - CR2032 battery powered - Complete with a sturdy wooden case Tool identification: D0211310W Calibration performed on 12/11/2024 Calibration expiry date: December 2027 Condition as per photographs. Used professional tool.

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Fedpfxoz Ha Hls Al Sepn Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, CNC machining center Manufacturer: Homag Type: BMG311 Venture 316L Year of manufacture: 2011 Technical data - Design: 5-axis CNC machining center - X-axis travel: 4,200 mm / 4,375 mm (with hole diameter 25 mm) - Y-axis travel: 1,400 / 1,550 mm (limitation in drilling operations) - Z-axis travel: 250 mm - Workpiece thickness: up to approx. 250 mm - Cantilever table: 8 cantilevers, LED positioning aid - Vacuum: 2 vacuum pumps, 100/140 m3/h and 90/108 m3/h - Main spindle: 5-axis, 10 kW Drive5C - Speed: 1,500 - 24,000 rpm - Tool holder: HSK 63 - Tool changer: 18 positions - Drilling head: 21 spindles, V17/H4/S0/90, 2.2 kW - Control system: powerControl PC85 - Software: WoodWOP 6.1 - Monitor: 17" TFT - Operating system: Windows XP Note: Fpodsz E Hpdopfx Al Sjn The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press Fpsdpfozhub Asx Al Ssn - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, Year of construction: 2026, pressure 100 t Fpjdpfx Alsyfwywj Ssn throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm welding current 500 Ampere Fpjdpfxol R Nnvo Al Son connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Fjdsmhm Aujpfx Al Sspn Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Fedeh Dqb Dopfx Al Sopn Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Fedpfx Aegazl Uol Sopn Other dimensions available.

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Fsdefg U Sispfx Al Sspn Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base.

Condition: new, number 70 Positionen weight 90 kg condition neu 28 mm Special set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 Fedpewth N Tofx Al Sopn 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 2x Stop Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Fpodpfx Aeyv I Hwjl Sjn Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm Fedpfx Aoyv I Insl Sjpn table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: used, mileage: 34 km, power: 96 kW (130.52 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: automatic, number of seats: 9, total length: 5,981 mm, total width: 2,533 mm, total height: 2,448 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4029.NW26.TL09575 ---- Errors and prior sale excepted! Compoint conversion to MTW Fedpfxszkdkxe Al Sspn * Siren, emergency lighting system * 3rd rear marker light * Digital radio SPECIAL EQUIPMENT * Tow hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Anti-theft alarm * Rear air conditioning - rear water heater - automatic climate control * Technology Package 6P: exterior mirrors with turn signals, electrically adjustable, heated and foldable; blind spot assist incl. cross-traffic alert; audio system; fog lights; LED downlight; pre-collision assist, camera- and radar-based; rear collision warning system; lane keeping assist; traffic sign recognition system; enhanced park pilot system front and rear; adaptive cruise control with stop & go function; surround view camera; navigation * Rear seat backs, tilt-adjustable - incl. headrests and armrests to the aisle * Sliding door, left * Stationary heater package 2 - stationary heater (fuel-powered auxiliary heater), programmable, incl. remote control, incl. 2 batteries and anti-theft alarm ADDITIONAL EQUIPMENT * 1 battery * 12-inch multi-function display and Ford SYNC 4 with extended voice control; Bluetooth hands-free system; USB interface; SMS read-out and sending function; integration of storage media (e.g. USB sticks or MP3 players) for playing music; emergency call assistant; Ford Power-Up software updates (over-the-air update technology) * ABS, EBD, ESP, TCS * Increased axle load, front to 1850 kg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Extended battery life * Floor covered with rubber, full vehicle length * On-board computer * Brake light, third * Roof, medium * Headliner * Double-wing rear door/180° opening angle (with window) - with heated rear windows, rear window wiper incl. washer nozzle and automatic activation when reversing * Tachometer * Vehicle modem - incl. live traffic information and WLAN hotspot 5GModern - information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the Ford App - current traffic information in real time (in connection with navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Windows, 2nd row: side windows fixed * Power windows, front * Parking brake, electronic * Ford Easy Fuel * Windshield, heated * 8-speed automatic transmission * Glove compartment with locking lid * Interior lighting * Interior mirror * Fuel tank 70 l * Paint: solid paint * Cargo area lighting * Driver fatigue and attention warning system * Technology Package 2 * Diesel particulate filter * Wheel covers * Wheels: steel 6.5 J x 16 with 235/65R16 * Windshield wipers with rain sensor * Headlights, low beam/daytime running lights * Sliding door, right * Side wall paneling, low * Power steering * Seat belts * Rear seat package 4 - 3-seater bench, narrow, in 2nd row, expandable, with three height-adjustable headrests, 3-point seat belts, with one ISOFIX bracket - 3-seater bench, wide, in 3rd row * Seat package 8A - driver's seat, 4-way adjustable - passenger double seat - passenger seat, 2-way manually adjustable - headrests, height-adjustable - driver's seat & passenger seat (outer seat), individually and variably heated - table on the passenger double seat (fold-out) - interior armrest, driver - lumbar support, driver - seat cover: fabric