Used Hollow Spindle for sale (13,113)

Condition: refurbished (used), 2 units - One spindle, fully overhauled (02/2020) with measurement report (measured at 30,000 rpm) - One working spindle used Supply unit with Cjdpfxey T Ixhj Ab Dsrg - Remote control - Spray device Control system: Siemens Simo Drive 611

Condition: used, Used Machine Crjdozlbqxepfx Ab Dog Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 - Milling spindle speed: 3000, 4500, 6000, 9000 rpm - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: used, Year of construction: 1987, functionality: unexamined, number of spindles: 19, Schleicher Unidrill 19 Multi-spindle drilling machine Crodszxk Uyopfx Ab Dog 19 spindles with 5 mm / 10 mm drills The machine is still in use and fully functional. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims due to fraudulently concealed defects also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Multiflex toolholder Spindle speeds: 33 - 2000 rpm Csdpfox Eah Aox Ab Dorg Chip tray Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Weight: 1180 kg Operating manual

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, 4-spindle paper drilling machine, Nagel Citoborma 490, year of manufacture 2000 – 4 drilling heads, type 45, installed for drilling diameters of 2 mm to 14 mm – two drilling speeds – torsion-resistant gantry design for precision and durability – optimal work safety through two-hand or foot operation – stack height 60 mm – feed depth up to 270 mm, enables drilling of A3 size sheets in double format – feed width 460 mm – easy drilling head and drill bit changeover guarantees minimal setup time Credpfx Aszw Uzzeb Deg

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm 6 spindles KADIGO tool monitoring system Crsdjzdttijpfx Ab Djg with IEMCA PRA 52/42 F bar loader (4m bars) Accessories

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe Csdjp Du Alspfx Ab Dsrg 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Condition: repair required (used), Year of construction: 1989, 6 spindles Cjdpov R Uqtefx Ab Djrg Thread cutting Cross drilling Thread rolling Milling attachment Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder (4m bar length) Credpfxezdtn Te Ab Dog Accessories

Condition: ready for operation (used), Fanuc A06B-0831-B230 AC spindle motor, serial number: C988K0401, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Cedpfszvafcex Ab Dorg

Condition: ready for operation (used), Fanuc A06B-0853-B100 / B-65152E AC spindle motor, serial number: C987J1757 – has a hole in the shaft (see photos), used, in good condition, 100% functional, scope of delivery as shown in the photos. Crodpszu El Ssfx Ab Dog

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt Crodpfx Abovh Naqs Dog - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data Cedpszuyxaofx Ab Dsrg - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Swivel spindle milling machine Manufacturer: Schröder Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Crjdpjzuyw Nsfx Ab Deg Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Fanuc A06B-6078-H206 # H500 spindle amplifier module Version: C SN: EA8307634, used, normal signs of use, 100% functional, scope of delivery as shown in photos. Crodex Eq Uijpfx Ab Dog

Condition: ready for operation (used), Fanuc A06B-6078-H206 #H500 Spindle Amplifier Module, Version: C, Serial Number: EA8708221, used, in good condition, 100% functional, scope of supply as shown in the photos. Crjdpfx Aszuiggob Dog

Condition: used, Year of construction: 2022, Oscillating cylindrical grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. It uses something similar to a ProLoc device. Location: Nattheim. Crjdpfx Aowhqpreb Dsg

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. A device similar to the ProLoc system is used. Crodpfx Abowhqple Dog Location: Nattheim.

Condition: new, Fanuc A06B-0854-B300 #3030 AC Spindle Motor, Model: ?6, Serial number: as shown in the photo, unused, 100% functional, (fan cover missing). Scope of delivery: as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Cedpfxoi D H N Ds Ab Djrg

Condition: ready for operation (used), Fanuc A06B-0830-B330 AC spindle motor, serial number: C978K0311. The terminal box is damaged; see photo. Used, with normal signs of wear and tear. 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Codpfx Abji D H Nnj Derg

Condition: ready for operation (used), Fanuc A06B-0857-B928#3441 spindle motor, serial number C03YK0709, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of supply as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Cjdpei D H Rasfx Ab Derg

Condition: ready for operation (used), Fanuc A06B-0726-B202 spindle motor, serial number C918K0141, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Crjdpfei D H I Hex Ab Dog

Condition: ready for operation (used), Indramat RAC 2.3-150-380-A-00-W1 spindle drive, serial number as shown in the photo, used, fan missing, minor signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! Csdpfx Asi Ebllob Dorg

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Crjdpfx Aozwp Uiob Djg Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: new, Bosch Rexroth ball screw assembly / ball screw spindle. • Manufacturer: Bosch Rexroth AG • Designation: BALL SCREW ASSEMBLY • Material number (MNR): R030429297 • Design/Size: 25 × 5R × 3 (as far as can be seen in the photo) • Original packaging / still sealed 25 × 5 ball screw, 25 mm nominal diameter and 5 mm pitch. New price: €682.39 net. Designation R030429297 Rexroth material/order number 25 Nominal diameter 25 mm 5 Pitch 5 mm R Right-hand thread X3 Further Rexroth design/size designation Crodpfxezyli Uj Ab Djg Ball Screw Assembly Complete ball screw Internal ball circulation, smooth operation, high load-bearing capacity, and pre-tensioned individual nut.