Used Spindie Moulder Tooling for sale (37,788)

Condition: like new (used), Globe Baguette machine in good working condition for more information please sent a request Chedpfx Aeumn Dujdaod

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed. Cjdpfxoxhfycj Adajhd

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Retactable belt. Chedjwt Tnhspfx Adajd Belt dimensions 700mm W x 29mm L

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 Cedpfx Adewth Uieajhd 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: used, Moulder IDC000075 - manufacturer: Wadkin - model: GA 220 Cedpfstwy T Rex Adashd - 4 years ago made renovation

Condition: excellent (used), Merand Baguette Machine in good working condition Chsdskzh Ehepfx Adasd

Condition: good (used), Year of construction: 2017, NNP Rotary moulder Chodpfjuanp Nex Adaed Stainless, belt dimensions 2250mm x 650mm, 650mm rotary moulder, previously used for pizza bases, with top mounted oil spray nozzle

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 310 mm, planing width: 310 mm, Top model from Weinig: Weinig Powermat 3000 Special 6-spindle four-sided planer All motors frequency-controlled, 4000–12000 RPM Extra wide working width of 310 mm Chsdpfexqxhfjx Adasd Working height 160 mm - Optional we can make it 200 mm All spindles with Powerlock High-speed feeding system of 100 m/min With profile and straight jointers Axial and radial CNC-controlled axes Short infeed table, 1.1 meters WMC Moulder Master Full options machine ! Like new, never used in production!

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Specifications and technical details: Spindle adjustment: –5° to +45° Spindle adjustment: electric with digital display Height adjustment: electric with digital display Fence: with digital display Spindle diameter: 30 mm (MK-5 taper) Motor output: 11 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Table size: 1,340 × 800 mm Table extension: on both sides, with pull-out frame support Csdpsxiztzjfx Adajhd Dimensions: 2,540 × 1,350 × 1,850 mm Weight: approx. 1,000 kg Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LMC-623C, working width: 230 mm, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 150 mm, total width: 1,600 mm, total height: 1,800 mm, total length: 3,500 mm, overall weight: 4,500 kg, power of feed motor: 7,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 125 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, workpiece height (max.): 150 mm, compressed air connection: 6 bar, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 415 V, tool diameter: 200 mm, table length: 2,000 mm, warranty duration: 12 months, shaft diameter: 40 mm, number of spindles: 6, extraction connection diameter: 125 mm, power: 74.5 kW (101.29 HP), input frequency: 50 Hz, product height (min.): 10 mm, product width (min.): 15 mm, Equipment: motor brake, The Leadermac LMC-623C Compact is a heavy-duty 6 spindle planer moulder (4-sided moulder) built for precision and high-volume production. It offers a working range from 15 mm to 230 mm in width and 10 mm to 150 mm in height, making it versatile for a wide variety of timber sizes. This machine is equipped with powerful Siemens IE3 motors, centralised lubrication, and pneumatic side pressures to ensure smooth operation, fast setup, and long service life. The 2000 mm infeed table with fence provides stable feeding, while hardened chrome bed plates and safety interlocks guarantee durability and operator protection. Highlights: 6 precision spindles, 40 mm, 6000 rpm Motor powers up to 20 hp per head (total installed 74.5 kW) Variable feed speeds 6–24 m/min (option to 30 m/min) Pneumatic chip breakers & pressure pads with digital readouts CE certified, dust extraction Ø125 mm A compact footprint with industrial-level performance — ideal for joinery workshops, moulding production, and manufacturers needing a reliable 4-sider. Codpexlfd Nefx Adaehd

Condition: excellent (used), Year of construction: 1997, Further information will follow… Chjdpfxjxuwqte Adajd

Condition: used, Year of construction: 2011, Overview  This blower–filler–capper synchroblock was manufactured in 2011 by the Italian company Kosme S.r.l.. The model KSB 4R-40-10 IsoBlock combines stretch-blow moulding, isobaric filling, and capping in a single compact system. Currently used for cider filling in 1.5 L PET bottles at 7,200 bph (8 g/L CO₂), the machine remains in production until December 2025 and can be visited on-site by appointment. The system includes preform and cap feeding units, and the sale price includes dismantling, handling, packing, and truck loading. Note: CIP and mixer are not included in this offer. Technical data  Capacity: 7,200 bph (1.5 L, 8 g/L CO₂) Formats: 1.5 L PET bottles Neck finish: 28 BPF Filling system: Isobaric Blow moulding stations: 4 Filling valves: 40 Capping heads: 10 (Euro PK Arol) Application: Cider and carbonated beverages Machine dimensions: 1,760 × 660 × 330 cm (L×W×H) Condition: In production until December 2025 Availability: From January 2026 Included systems: Preform feeder, cap feeder Excluded systems: Mixer and CIP unit Csdpfjxqpkqsx Adashd

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. If customer wishes it can be seen working. Cjdpfx Adjxn Um Seashd

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Chodpfexlm Nyox Adaed Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left Chjdpfxjxran No Adasd With tools as shown in the picture

Condition: used, Year of construction: 1990, Bottom spindle Right side spindle Left side spindle feed section Bottom spindle Bottom spindle Top spindle Top spindle Bottom spindle machine comes with feeding unit Chsdpfxjxuh Tro Adaod

Condition: used, Year of construction: 2001, functionality: fully functional, Elektra Beckum bench milling machine type TF 904, 2.8 RDNB, year of manufacture 2001, milling fence with fine adjustment, 2.8 kW, 30 mm spindle, tiltable Cjdexf E N Espfx Adaehd

Condition: good (used), Year of construction: 1990, Machine no. 143-5752, power 43 kW, planing width 220 mm, planing height 170 mm, 8 spindles Chedpfsxt Ir Eex Adajd +++ Attention: This machine is part of an online auction! +++

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Dimensions (L/W/H) 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31 also for window production ----- Machine is cleaned and functionally checked ! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm Chodjvnv Uzspfx Adajd 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 1982, BALESTRINI Double Tenoner: Csdpfxexuwa Ij Adaohd Maximum working width: 360 mm Maximum working height: 120 mm Minimum working length: 240 mm 2 spindle heads with 2 x 7.5 HP motors Feed motor: 1 HP Weight: 1,100 kg 2 return conveyors for workpieces

Condition: used, Year of construction: 1966, Swivelling spindle: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Swivel angle display: - Fence indicator: Scale Spindle diameter: 30 mm Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm Motor power: 4 / 5.5 kW Motor brake: Manual Chodpfx Aoxu Dhlsdajd Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 900 mm Weight: 700 kg

Condition: excellent (used), Year of construction: 2001, Weinig Profimat 26 Super Year of manufacture: 2001 Planing width: 220 (230) mm Planing height: 120 mm Infeed table length: 2,500 mm Spindle arrangement: Bottom Right Left Cedpsxqnxtefx Adaehd Top Bottom

Condition: used, Year of construction: 1984, incl. Eumacop feed, table size: 1100 x 760 mm, table height: 870 mm, speeds: 3000/4500/6000/9000 rpm, height adjustment: 120 mm, weight: approx. 700 kg Chodpfow E E Epsx Adaod Storage location: Nattheim

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with separate motor, 7.5 kW and spindle brake Cedpfx Adjwyulusajhd Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: good (used), Year of construction: 1996, functionality: unexamined, shaft diameter: 50 mm, power: 77.5 kW (105.37 HP), High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Chodpfxexr Hbvo Adasd Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz