Used Holzher 1255 for sale (170)

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Max. cutting height (vertical) 2,100 mm, Max. cutting height (horizontal) 2,010 mm, Max. cutting depth 60 mm Pjdpfx Adswgm Ihologk Motor 4 kW Max. circular saw blade diameter = 250 mm, Extraction nozzle diameter = 120 + 100 mm Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, Pedpfsyyzp Hsx Adlogk stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 The machine will be completely overhauled Equipment and technical data: Cutting range: Cutting length: 4300 mm Cutting height: 2100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support ensures optimal positioning even for narrow workpieces Chips are conveyed away through slanted slots Lifting roller transport system: Manual operation for smooth and material-friendly transport Pgodpfxjyxx U Do Adljk Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Carbide-tipped, 250 mm, alternate top bevel, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: Including workpiece support for narrow sections (4 fields) With strip stop Extraction system according to BG guidelines TRK (below 2 mg fine dust per m³ air) Dimensions: approx. 5,100 x 1,100 x 2,600 mm Weight: approx. 1,100 kg Availability: by arrangement Location: 63934 Röllbach

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting Psdpfx Adeu R Syiologk - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Pedpfxsvvi Nbo Adlsgk Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) Pgjdpfx Ajy Ddycodlsk • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) • Automatic edging feed: coil or strips

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included • Additional services available upon request: • Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm) Pgjdpfx Adsyzp H Nslsk

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Pgodpfx Asy Emw Hodlsk Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,100 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 320 mm, number of axes: 3, spindle motor power: 12,000 W, This 3s HOLZHER dynestic 7507 was manufactured in 2017. It features an X-Axis stroke of 3100 mm or 4100 mm, a Y-Axis stroke of 1560 mm, and a Z-Axis stroke of 320 mm. The machine offers a vector speed of 110 m/min and a main spindle power ranging from 6 kW to 12 kW. If you are looking to get high-quality CNC wood machining capabilities, consider the HOLZHER dynestic 7507 machine we have for sale. Contact us for further details. • Machining height: up to 80 mm from top of suction cups Psdpfeyi D Ensx Adljgk • Vector speed: 110 m/min • Main spindle: 6–12 kW (air or liquid cooled) • Drilling head: 14–24 spindles (depending on configuration) • Tool changer: 6, 12, or 18 stations Additional equipment • Vacuum pump(s): 250 m³/h per pump (up to 500 m³/h total)

Condition: good (used), HOLZHER arcus 1334 Edgebander Well-equipped, possibility to inspect and test before purchase Automatic NC control from the control panel Fluids Pre-milling cutters Glue application, GLU JET system Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Finishing trimming saws Top and bottom milling units R1-R2 Corner rounding on 2 units Profile scraper Pjdpfx Aeyzxqqodlegk Flat scraper Fluids Polishing unit Documentation Feed speed max. 18 m/min Edging thickness max.: 8mm Edgebanding thickness in roll max.: 3mm Edgebanding height max.: 60mm Machine tested, possibility to check during operation on site

Condition: used, Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Psdpfx Aoyrq Eaedljgk Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Polishing unit

Condition: used, Edgebander Holzher Sprint 1317 Pre-milling units Glue application, glue cartridge Pneumatic pre-cut guillotine Pressure rollers Cut-off saws Top and bottom milling units Corner rounding unit Profile scraper Flat scraper Polishing unit Max edge height mm: 50 Edge band thickness in roll: 3 mm Feed speed: 10 m/min The machine requires servicing as well as setting and adjustment. Pgedsx Tf D Uspfx Adljk The machine can be switched on; all units activate, but the front saw does not respond to material and the corner rounding unit needs adjustment.

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Podpowv Dfcofx Adlogk Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Year of construction: 1999, condition: used, Edgebander HOLZHER 1436 SE Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery to be agreed Start type to be agreed Description Comments Pedpfx Aodp R E Iedlsgk Thickness of max. 13 mm Thickness of the roll core max mm 3 Feedrate max m / min 11 Suitable for PUR glue yes Copier tip 1 motor Cyclin. Profile scraping Aggregates that work pneumatically Machine length 4500 mm Control of the SPK 18000 machine Height of the max. Dimensions in mm 51 Material length min mm 180 Material width min mm 60 adhesive tank yes Saw blade 2 motors Milling unit straight and radius 1 scraper unit up down A polishing unit like this Execution: Right-hand machine CE mark yes CE conformity declaration yes Connection power kW 7 Area min. length / width / height mm 4500x1020x1630 Weight kg 1150 Readiness Basic functions prepared for the presentation In good condition

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Original New Price: €138,000 + VAT Our Price: €69,000 + VAT (50% savings) Why choose this machine? Psdpfxjygrghe Adlogk Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Pjdpfjwwiybjx Adlegk

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Pjdowwhn Djpfx Adlsgk

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of drilling spindles: 14 Total number of tool changer positions: 6 Pgsdpfx Ajx A Tinsdlek

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGEBANDER machine model HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new Declaration of CE-conformity Conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 Pgsdpfeyk E Dzsx Adljk min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. support for large panels soundproof cabin glue system cartridge Composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU 4.Flush/radius/chamfer milling units . 2 motors . HOLZ-HER Fine milling unit 1827 MAN 5.Corner rounding unit . HOLZ-HER Corner rounding unit 1832 . 1 motor 6.Scraper unit . Profile scraper, Flat scraper . HOLZ-HER Profile scraper unit 1929 HOLZ-HER Flat scraper unit 1964

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (machine has been thoroughly serviced every year!) Equipment: - iTronic – Adaptive pressure and glue quantity control, automatic, program-dependent fine adjustment - MOT SPS adjustment for infeed fence - Automatic chain lubrication – Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM stepless, 400V/50Hz, 2.2kW, V2 SPRINT 1329 PERFORMANCE, 400V/50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode This energy-saving mode is an automatic standby function - Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) With 2 cutter units for processing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left rotation Air Stream System (HOLZ-HER / LEUCO patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right rotation Air Stream System (HOLZ-HER / LEUCO patent) - 1901 SYNCHRO edge feeding Automatic transport for coil and strip material - Glu Jet GJ301 automatic glue applicator station (2.3 kW, 50 Hz) - DW501 SPS MOT. SPRINT - motorized - GM501 spray unit after pressure unit with lubricant Recommended for high-gloss edges - Kapp unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically tiltable 0/10° - FR701 milling unit Pgodpfx Adjy Hyl Tjlek 100% repeat accuracy at push of a button due to play-free mechanics - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - FF701 contour milling unit 100% repeat accuracy at push of a button due to play-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm, Z = 4, radius R = 2 mm, left rotation, with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm, Z = 4, radius R = 2 mm, right rotation, with CM technology - 1929 MOT4 scraper unit incl. high-gloss package with motorized adjustment of tracing rollers - HW reversible plates for scraper holder, R = 2.0 mm (2 pcs required) - FK701 flat scraper With pre- and post-sensing for removal of glue residue - TR501 spray unit for infeed and outfeed (release agent + cleaning agent) Location: Hesse Availability: Approx. July 2026

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed unit, 30 mm spindle, 50 mm milling width. Machine dimensions: 1000 x 1000 x 1300 mm, weight: 250 kg, in good condition, fully functional. Shipping available at additional cost. Pgedpfx Adsvkgdrslsk

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit Pgodpfjwv Uq Ajx Adlsk - New pneumatic cylinder Shipping possible at additional cost

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 5/1-107, functionality: fully functional, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Equipment: CE marking, The machine has the following configuration: 1. Pre-milling unit (tools included) 2. Glue application unit 3. Pressure rollers (tools included) 4. End trimming unit (tools included) 5. Not specified (tools included) 6. Corner rounding unit (tools included) 7. Radius scraping unit (tools included) 8. Not specified (tools included) 9. Flat scraping unit (tools included) MACHINE DETAILS Number of units: 9 Voltage: 400 V Power consumption: 21.9 A Main fuse: 50 A Dimensions Dimensions (L x W x H): 6,100 x 1,440 x 1,730 mm Transport packages: 1 EQUIPMENT Pgsdpfx Asy Akgtjdlok CE marking

Condition: used, Year of construction: 2003, total height: 1,750 mm, total length: 6,000 mm, total width: 1,600 mm, Weight: 3.000 kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 470/0-303 - Number of units [pcs]: 8 - └ 1st unit type: - - Tools available: No - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Fine milling unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Transport dimensions: 6000mm x 1600mm x 1750mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Pgedpfx Adoyz Uu Eslok Yorick Diebels

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 177 operating hours Features and technical specifications: - Edge Control PPC 322 W control system with 21.5" 16:9 color touchscreen - ECO MODE energy saving function - Motorized pressure bridge adjustment - Extendable workpiece support 600 mm - Extension for extendable workpiece support - LED entrance light, 3-color - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing milling unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensing nozzle) - Cartridge storage for 4 cartridges - GluJet collection container - Pressure unit DW 301 with motorized NC axis - GM301 spray device after pressure unit with lubricant for high-gloss edges - Kappa unit 1918 pneumatic (60 mm) - Extraction hoods for Kappa unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1 incl. motorized horizontal axis adjustment - Shelf program - Scraping unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray device for separating and cleaning agent - Buffing unit Pgedpfoy E Ayksx Adlsk Availability: short-term Location: Flörsheim