Used Edge Banding Machine for sale (66,844)

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Nedewun Irepfx Abuown Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Nodpfoycvcxox Abuewn

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Nwedoz Ngg Ejpfx Abujn

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013, for sale. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No series production was carried out. The reason for the sale is the closure of the business! Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Nwedpfozvqclox Abujn Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Conductor cross-section: 5×6 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2012, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Nwodpo Aba Rtefx Abuon

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 2 mm, height adjustment type: mechanical, actuation type: electric, overall weight: 300 kg, Equipment: CE marking, documentation/manual, – manufactured in Austria – year of manufacture: 2011 – DTR documentation available – unpainted – compact – takes up very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm – thickness of the workpiece: 10–50 mm – workpiece feed rate: 5.5 m/min – height to table surface: 880 mm Nwjdpfx Aow H Rrwjbuon – table dimensions: 1800 x 300 mm – support – total power: 2 kW – power supply: 400 V, 50 Hz – electronic adhesive temperature regulator: 20–250°C – compressed air pressure: 6 bar EQUIPMENT: – platen – belt feeder – guillotine – preliminary trimming – adhesive applicator – 3 pressure rollers – guillotine – belt trimming, front/rear – 2 milling units, top/bottom – overall dimensions (L/W/H): 2050/930/1280 mm – weight: 290 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total height: 1,400 mm, total length: 4,000 mm, total width: 1,200 mm, OTT ATLANTIC EDGE BANDER 2 HM SAW BLADES 140X3.2X16 Z=36 FLUSH MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS FINE MILLING WITH 2 HM REVERSIBLE KNIFE CUTTER HEADS SCRAPING UNIT WITH 2X HM SCRAPERS, AUTOMATIC FEED EDGE CLEANING – OSCILLATING BRUSHES Nodpfsww H Enex Abuswn MACHINE LENGTH: 4.50 M

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Njdpfxsw Dm Hro Abuewn

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) Nwsdpfxe Afabao Abuon - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge banding machine (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Gluing technology used: EVA glue granules GlueJet (exchangeable station), L-Tronic laser (exchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), rounding units (2 motors, digitally adjustable), sanding units (profiled and flat), indexing unit (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edge banding thickness: 15 mm Maximum edge banding thickness in roll form: 3 mm Maximum edge banding height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Nwedpsz I R Snsfx Abuon Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece inlet height: 877 mm Machine weight: 4200 kg Minimum electrical connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electrical height adjustment: YES Top belt pressure: YES Maximum feed rate: 25 m/min Feed rate adjustment, stepless: YES Heating zone: YES Spray nozzles: YES Machine documentation: YES Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Njdozy Sfcspfx Abuswn Total length 3516 mm Feed speed 10 m/min. Weight 850 kg

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Njdpez Afctefx Abuswn Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), FORMAT 4 Tempora 60.06 edge banding machine with glueBox – used Touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond flush-trim cutter with both forward and reverse rotation, glue reservoir located underneath, changeover device for glue reservoir, use of PUR adhesives possible, GLUEBOX, pressure unit with driven roller, miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, corner copying unit with diamond-coated cutter, radius trimming blade, radius trimming blade with motorized positioning, edge trimming blade, program-controlled edge trimming blade, infeed stop, spray system for release agent, spray system for lubricant, spray system for cleaning agent, year of manufacture 2022 ----- Technical data ----- Edge thickness, roll material: 0.4 - 3 mm, Edge thickness, strip material: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm, Feed speed: 10 m/min, Screen diagonal: 15 inches, Dimensions of flush-trim cutter: D 80 x 64 mm, Power of flush-trim cutter: 1.1 kW, Power of miter saw: 0.35 kW, Power of trimming station: 0.75 kW, Dust extraction port Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Overall length: 4,872 mm, Dimensions (L x W x H): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - all settings checked - adjusted according to manufacturer's specifications - complete basic inspection - complete basic cleaning Nwodpfxju R S Nwj Abujn - electrical system checked - pneumatics checked - ready for immediate use

Condition: used, Year of construction: 1993, with prejoiningused, good conditionmake Otttype Kantomat 156- FÜyear 1993glue thickness 15 mmworkpiece height min 10 mm max 60 mmworkpiece width min 60 mmworkpiece length min 60/160 mmthick edges up to 3 mmcaps from the roll up to 3 mmprejoiningcross-cutting unit K 14 / 2 x 1,1 PSflush milling HF15.1 2 x 1,5 PSChamfer 082 2 x 0,8 PS 0-45° swivelingRadius milling 2 x 0,8 PSRadius scraper controlled pneumaticBuffing oscillating pneum. with pneum. feed 2 x 0,3 HPautom. edge magazinefeed speed steplessgranulate quick heating basinsound insulation hoodlarge roller supportsuction connection D 160 mmspace requirement approx. 7400 mm x 1000 mm x 1600 mmtotal connected load 22 kWstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Njdpfsvwfyfjx Abuewn

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee. Nedpfjvwgizsx Abuewn

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW Nwedpfsv I Sayjx Abusn RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM MACHINE LENGTH 7.90 M

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: Nsdpfszyy Avsx Abuswn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Nwodowlbxlepfx Abusn Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nwodpfj Afxi Ajx Abusn

Condition: used, For profiling and edge-milling windows, doors, individual components and similar items with all-round profiles Units: Nwsdpfsztv Dpjx Abuen Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: excellent (used), Gluing machine Guillotine cross-cut saws milling cutter Scraper Nedpfxettu Rie Abuown Polishing machine

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Edge banding EVA glue Nsdpfxet Ir Tps Abuswn End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation.

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Nwodpfx Abszbc Edousn Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Nedpfexix Hxox Abuown Radius scraper: Yes

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Nedpfez Ea Dzjx Abuewn Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use