Used Holzher Cut 1255 for sale (171)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT ATTENTION: The machine is located in Sydney / Australia! Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts. Machining area: 3700 x 2200 mm. The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface. Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. Todsz Hvy Ijpfx Abuod 18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm. Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups. 1000 m³/h vacuum capacity via VariAir pump (frequency-controlled). To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system. Power Label above the lifting table for panels up to X=4200 x Y=2200 mm. Touch Label Light - extra label printer under the operator screen for labeling small parts. The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table. Overhead laser for complex contours (laser color green). Screen: 21.5'' / 16:9 touch screen Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling. Barcode scanner Touch Tool - tool length measurement Cold Gun - tool cooling Delivery, installation, and training for the machine can be carried out directly by us for an additional charge. The machine is currently located at our branch in Sydney / Australia. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Todpfx Aszk N Amebued Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2000, Holzher 1417 edge banding machine Gluing thickness 8 mm feed speed 11 m/min Joint trimming with DIA tool type 1961 Snipping unit 1918 Flush trimming unit 1823 Multifunction unit 1942 Scraper unit 1929 R2 Copy trimming unit 1983 Todpsuaqh Usfx Abujd Surface scraper unit 1964 Buffing unit 1944 K Condition checked for function Year of construction 2000 Price 12000.

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately. Tsdpfjzr Rwhex Abued

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 machining center - used Throughfeed processing, 4-sided profiling possible, integrated vacuum pump, automatic vacuum positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, central lubrication system, automatic ----- Technical Data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: CAMPUS HOPS, Tsdjyrp Srjpfx Abusd main spindle motor power: 6.5 kW, main spindle speed: 1,000 - 18,000 rpm, main spindle mounting: HSK-F63, drilling unit motor power: 1.7 kW, drilling spindle mounting: M10, interference fit 11 mm, number of vertical drilling spindles: 13 pcs., no. of horizontal double drilling spindles in X direction: 2 pcs., no. of horizontal double drilling spindles in Y direction: 1 pc., saw blade diameter of saw unit: 120 mm, number of tools in tool changer: 6 pcs., extraction connection diameter: 2 x 120 mm + 1 x 140 mm, required volume flow: 4,100 m³/h, required static negative pressure: 2,500 - 3,000 Pa, required air velocity: 30 m/s, compressed air connection: 6 bar, compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" iTronic - adaptive pressure and adhesive application control and cleaning routine Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Tjdpfx Aoz Rl Tmebuod Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Radius trimming Chamfer trimming 45° Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 920 mm, workpiece height (max.): 70 mm, number of slots in tool magazine: 6, actuation type: pneumatic, total height: 2,350 mm, total length: 3,675 mm, total width: 1,660 mm, overall weight: 2,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOLZ-HER Vertikale CNC Evolution 7405 4mat, Baujahr 2014, Lieferung ab Standort Bearbeitungslänge: 3.200 mm Werkstückabmessungen: X = 200 – 3.200 mm (bei zusätzlicher Auflage auch länger möglich) Y = 70 – 920 mm Werkstückdicke: Z = 8 – 70 mm Maximale Bearbeitungslänge auf X-Achse ohne Umspannen: X = 1.500 mm Z-Achsen-Verfahrweg = 240 mm Maximal programmierbare Geschwindigkeit: Vektorgeschwindigkeit: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Software: CAMPUS V6 – Single Evolution 19-Zoll TFT-Flachbildschirm Höhenverstellbarer Rollentisch zur 4-seitigen Bearbeitung. Komplette Formgebung der Werkstücke durch präzises Fräsen aller vier Seiten möglich. Druckluft-Vakuumsystem Tedpfx Absy Ny Uyjued Absaugung am Werkzeugkopf 2D Barcode-Scanner Bohraggregat 7883, 15 Spindeln, 1,7 kW Leistung (9 vertikal, 6 horizontal) Performance-Paket, bestehend aus: 7830 Fräsaggregat 6,5 kW (S6) HSK F-63 Werkzeugwechsler 7887 mit 6 Werkzeugplätzen (Pick-up-Typ) Manuelle Schmierung, kombinierter Schmierversorgungspunkt

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Tsdpfxjytp Hre Abued

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Tjdpex E Ah Iofx Abusd Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic Tedpszlbpzsfx Abusd - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2001, Used Machine Todpfxszk Nm Ej Abued Year Built: 2001 Condition: Well-maintained Features and Technical Specifications: - Cutting length: 4,300 mm - Cutting height: 2,200 mm - Cutting depth: 45 mm - Motor: 3 kW - Saw blade diameter: 220 mm - With SuperCut scoring device - With automatic sliding table - Complete with rip fence - With strip fence Availability: Available immediately Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 161/1-10, functionality: fully functional, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 7 1st unit: Pre-milling unit Tjdpfx Abez Ni Rmjued 2nd unit: Gluing unit 3rd unit: Pressure rollers 4th unit: Edge trimming unit 5th unit: Rough milling unit 6th unit: Corner rounding unit 7th unit: Edge planing unit MACHINE DETAILS Voltage: 400 V Current consumption: 38.85 A Fuse rating: 50 A Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,500 x 2,580 mm Weight: 1,500 kg EQUIPMENT Tools: Pre-milling unit Gluing unit Tools: Pressure rollers Tools: Edge trimming unit Tools: Rough milling unit Tools: Corner rounding unit Tools: Edge planing unit CE marking

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Tsdpeh Ux Suefx Abusd Glue application station 1906 Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feeder 1901 Sensing nozzle Printing unit 1913 MOT Tjdpfoh Uyg Eex Abujd Cutting unit 1918 Milling unit 1942, top Milling unit 1942, top/bottom for rounding Pull blade 1929 Contour milling unit 1983 Surface pull blade 1964 Smoothing unit 1944 Length approx. 5900 mm Connected load 21.4 A

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Tjdpfxew I U Ecs Abusd Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit Tedpfe Aa A I Ssx Abuod - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi Tedezx Ennspfx Abuod with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2021, functionality: fully functional, Return-Master 5920 return system, 4 years old. Serviced by the top-tier Dimpex service team. Serious inquiries only!!! Tedpfxoyhpyns Abuod

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min Tedpfxow Nad Ho Abuod With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. Todpfeyzg Dfox Abuod From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 15511601/120, functionality: fully functional, travel distance X-axis: 4,045 mm, travel distance Y-axis: 2,490 mm, travel distance Z-axis: 317 mm, workpiece length (max.): 4,045 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 317 mm, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,200 mm, Equipment: CE marking, documentation/manual, HOLZ-HER Horizontal-Nesting-CNC Dynestic 7507, Baujahr 2018, Lieferung ab Standort Enthalten: Software Campus V7 CAD/CAM, 1 Floating License CAMPUS V7 „Better Nest“ für rechteckige Bauteile High-Speed-USB-Server Handbedieneinheit Bedienpult mit 21,5" 16:9 Flachbildschirm Bohrkopf 7884, 14 Spindeln 10/4 inkl. Nutfräse Guscugw Njy Nzubouob Fräseinheit 7830, 8 kW (S6/40) Werkzeugwechsler, 6 Positionen, Pick-Up-Ausführung Werkzeugwechsler 7872 mit 1 Werkzeugfach, in X- und Y-Richtung schwenkbar Winkelgetriebe 7868 Individuelle Hinteranschläge ECO Vac – intelligentes Vakuumsystem Vakuumpumpe 3 x 140 m³/h = 420 m³/h, luftgekühlt Sicherheitslichtschranke Zentralschmierung, manuell Tsdpsy Nzubjfx Abued EasyLabel-Drucker 1 zusätzliche Bearbeitungsstation A, hinten mit Anschlag Wärmetauscher zur Steuerungsschrankskühlung, max. 32 °C DC-Notstromversorgung (USV) Personensicherheit durch vertikale Sicherheitslichtvorhänge an allen vier Seiten der Maschine, für optimalen Zugang zum Maschinentisch. Manuelle Schmierung – Schmierstellen für alle Linearführungen in X, Y und Z sowie für alle Kugelgewindespindeln in X, Y und Z. Zusätzlicher Vakuumanschluss für 10 Vakuumsauger inkl. Wechselschlauch Vakuumsauger

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Tedpfovvi Nbex Abued

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Todpfjtt S D Rex Abuod Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Design: automatically adjusting aluminum slat bed Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Condition: very good Todpfsiwlz Aex Abuod Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 Tjdpfxezk N U Ao Abujd - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach