Used Horizontal Borer for sale (6,488)

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t Nlodjx Ni E Iopfx Abuoh ja

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), Nodpfx Aox Ecwmebuolh - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Nodpfx Ajwn Dy Dsbuelh Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: used, functionality: fully functional, Item: D-6670-Tank 2500 Used Stainless Steel Tank, Capacity 2,500 L, Single-walled Manufactured by Botax Denmark Stainless steel tank, AISI 304. (no agitator) Dimensions: Ø1100 mm, L 2600 mm Single-walled, 4 inlet/outlet connections Nodpfx Abov Sztdjujlh Maximum pressure: 0.5 bar AISI 316

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min Nodpfx Abou Sbpvsujlh total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm -Z750mm 1-degree pallet indexing Nsdpfsycvpfox Abuolh 60 tools Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: used, Year of construction: 2000, gebraucht 2000 6253 prompt, Zwischenverkauf v 1900 € 1 Schwenkrahmen 2480 x 0,9 x 27 mm 45 / 90 m/min 225 mm 180 x 245 mm rund 100 mm, 100 x 100 mm rund 160 mm, 160 x 160 mm 935 mm 1.1 kW 1500 mm 700 mm 1400 mm 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition Nodpeynmy Ejfx Abuslh • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 14200 € 272.64 € Schwenkrahmen 4160x34x1,1 mm 20-100 m/min 320 mm 320 mm 610x320 mm rund 260 mm, quadrat 225 rund 320 mm, quadrat 320 rund 320 mm, quadrat 320 740 mm 0.37 kW 2.2 kW 0.12 kW 2100 mm 1200 mm 1350 mm 1150 kg rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment Nlsdpfx Aboynm Ntouoh saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61900 € 1169.91 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm 540 mm 670x540 mm rund 540 mm, quadrat 540 rund 510 mm, quadrat 510 rund 270 mm, quadrat 250 805 mm 2.2 kW 4 kW 0.12 kW 3100 mm 2350 mm 2150 mm 3800 kg Nljdpfx Aboynm Rqjuoh NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Nedpfxeynnhqo Abujlh Heavy duty gearbox Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, controller manufacturer: Siemens, controller model: 840D Solutionline, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, spindle nose: HSK63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Hüller Hille NBH500 Condition: Functionally refurbished by the professionals at GSN Maschinen-Anlagen-Service GmbH (Pallet changer, guideways and ball screw drive, measuring system) Spare parts, repairs, modifications, retrofits, relocation, commissioning, and much more – all from a single source. Technical data and highlights: Pallet size: 500x500mm (Additional pallets available) Year of manufacture: 2013 Tool interface: HSK63 Control system: Siemens 840D Solutionline Main axes: X/Y/Z/B Spindle type: Motor spindle Spindle speed: 10,000 rpm Tool magazine: 60-position chain magazine Axis travels (X/Y/Z): 900/800/900mm Coolant: 600l coolant tank incl. chip conveyor Rotary table (B): NC type, 0.001mm Options: Renishaw measuring probe, work area extraction, internal coolant supply 60 bar, 6-position hydraulic clamping system on the setup station. Njdpfx Abozzqwgsuolh

Condition: ready for operation (used), Year of construction: 2015, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Spindle speed rpm: 14,000 Njdpfx Abjzu Trysuelh Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Number of positions in tool changer: 60 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant: Yes

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60227, Offer 26293 Hydraulic Horizontal – Two-Column Miter Bandsaw Machine Technical data: - Automatic operation for the cutting process, hydraulic lifting and lowering of the saw frame - Manual miter adjustment to the left and right with clamping - Saw band dimensions 4400 x 34 x 1.1 mm - Cutting speed, continuously adjustable 15 - 150 m/min - Cutting pressure regulation, continuously adjustable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range: - at 90°: round 335 mm - at 90°: square/rectangular 500 x 335 mm - at 45°: round 330 mm - at 45°: square 320 x 335 mm - at 30°: square 170 x 335 mm - Miter adjustment with digital angle display - Outfeed roller conveyor with dimension stop 6000 mm - Infeed roller conveyor 4000 mm - Drive 400 V / 6.5 kW Nljdpfezz Rbljx Abuoh - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. Nedpfx Aboz Aaf Neuolh This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm Nedpfx Abexh Ruljuelh 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 15330 € 294.34 € 22 to 200 mm 150 x 10 mm 1100 x 630 mm 120 mm 55 mm 4,6 - 8 mm/s 70 mm/s 45 l 1.5 kW 925 mm 1200 mm 900 mm 1050 mm 630 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Nedpfx Aeynngmsbuolh Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Table length: 1250 mm Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Nedsz Ihnajpfx Abuslh Number of tools: 90 positions High pressure: 70 bar

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G Nlsdjz Iw Ezjpfx Abush MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Year of construction: 2026, condition: new, The 3500L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304SS stainless steel. - Capacity: 3500L - Motor: 15kW, 3-phase, 50Hz Nljdpfx Abezuxv Roueh - Machine weight: 1300kg - Machine dimensions: (L: 3350 x W: 1410 x H: 2350mm) - Mixers available from 400L to 3500L The mixer's interior and ribbon itself are highly polished, significantly simplifying and accelerating mixing and facilitating cleaning after use. These mixers are used for mixing bulk materials. They are primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: used, Year of construction: 2012, 1 used 4-axis horizontal machining center Manufacturer: DMG Type: NHX 4000 Year of construction: 2012 Control: Siemens 840D SL Operate Technical details: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Spindle speed: 20 - 12000 rpm Spindle motor: 25/35 kW Nlsdpfx Aozq R Tmebuoh Torque at the spindle: 86 / 130 Tool holder: SK 40 Number of tool magazine positions: 40 Maximum tool diameter: 70 mm Tool diameter with free adjacent positions: 170 mm Tool length - max.: 450 mm Maximum tool weight: 12 kg Pallet size: 400 x 400 mm Number of pallets: 2 Workpiece diameter - max.: 630 mm Workpiece height - max.: 900 mm Table load: 400 kg Rapid traverse rates x/y/z: 60 m/min Feed rates x/y/z: 60 m/min Internal coolant supply: 70 bar Machine weight approx.: 8.5 t Overall dimensions: 3200 x 4800 x 2900 mm Equipment: Production package with internal coolant supply (IKZ) at 40 bar

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges Nlodpfx Aoz H Tqdsbueh - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 500 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC MSX 501 WORKING CAPABILITIES: X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm B-axis rotation: 360° Rapid traverse speed X, Y, Z: 50 m/min TABLE: Number of pallets: 2 Table dimensions: 500 x 500 mm Maximum workpiece dimensions: Ø 800 x 1,000 mm Table load capacity: 500 kg Nlsdpfx Absz H I A Ueujh SPINDLE: Tool holder taper: ISO 50 Maximum spindle speed: 8,000 rpm Machine configuration: •120-tool magazine •Spindle connection DIN 69871 ISO 50 •High-pressure system through the spindle, 70 bar, complete with tank and paper filter •Chip evacuator •Operating manuals and CE declaration Year of manufacture: 2004

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting capacity 90° (rectangular) 460 x 250 mm Cutting capacity 90° (round) 330 mm Cutting capacity 60° (rectangular) 205 x 200 mm Cutting capacity 60° (round) 205 mm Cutting capacity 45° (rectangular) 305 x 250 mm Cutting capacity 45° (round) 305 mm Adjustable band speed 48/96 m/min (60 Hz) Saw band dimensions 27 x 0.9 x 3960 mm Nedpfx Aez Drarebuelh Power consumption 1.5 / 2.2 kW Machine weight 900 / 1060 kg (net/gross) Machine dimensions LxWxH = 2310 x 1070 x 1630 mm

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm Nedpfxjyfgc Is Abuslh - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Nljdex Dlgnopfx Abujh Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes have linear drives Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.