Bending machine horizontal

THOMAN Max 12

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. Gujdpfx Ajxgukbsnloc The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: used, used three-jaw chuck chuck flange with morse taper for mounting in tailstock or hollow spindle Guodobnwrmspfx Anlsc Chuck Ø: 240 mm Morse taper size: 6

Condition: ready for operation (used), Year of construction: 1999, pressure 36.0 t stroke 250 mm flat steel 200 x 10 mm working feed 6.0 - 24.0 mm/min Gusdpfeyy A Idjx Anljc return speed 60.0 mm/min work height max. 900 mm table: 580 x 1170 mm total power requirement 4.1 kW motor 400 Volt 50 Hz oil volume 60.0 ltr. weight 1100 kg range L-W-H 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on request Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting - Several/various bending tools - Infinitely variable adjustment of bending speed and pressing force - 1x freely movable double foot switch - Operating instructions

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: Gusdpfx Anowp Egujljc - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm Gujdpfx Aneup Uzxsljc - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Guedpfxsvv Rfkj Anlec Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system Gjdpfxexv D T Re Anljuc 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm Gujdpex Afpasfx Anljc grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, Year of construction: 2021, total length: 7,010 mm, Articulated telescopic work platform Manitou 160 ATJ Plus Drive Diesel Year built 2021 Godpsy Abhzjfx Anlsuc Work height (mm) 16,210

Condition: used, functionality: fully functional, Year of construction: 2019, TRUMPF TruDisk 4006 (6 C) – High-Performance Solid-State Laser with KLH Cooling Unit RW 20/0 SK Description: The TRUMPF TruDisk 4006 (6 C) is an industrial high-power solid-state laser delivering 4 kW laser output, engineered for precise applications such as laser welding, cutting, and cladding. The system is distinguished by its high energy efficiency, stability, and outstanding beam quality. Combined with the KLH Kältetechnik RW 20/0 SK cooling unit, it is ideally suited for use in automated production lines, robotic cells, or CNC manufacturing systems. Technical Specifications Laser (TRUMPF TruDisk 4006 (6 C)) Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 4006 (6 C) Equipment No.: L4216M0390 Serial No.: 20-10-03-A604 Year of manufacture: October 2019 Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 22 kW / 23 kVA Nominal current: 32.5 A / 400 V Frequency: 50 – 60 Hz Gsdpfxjxwc Tre Anleuc Protection class: IP 54 Weight: 820 kg Short-circuit capacity (SCCR): 50 kA CE marking: Present Technical Specifications Cooling Unit (KLH RW 20/0 SK) Manufacturer: KLH Kältetechnik GmbH, D-18209 Bad Doberan Model: RW 20/0 SK Model No.: 0393710 Serial No.: 17KLH00670 Year of manufacture: 2017 Refrigerating capacity: 10.2 / 12.9 – 20.4 / 21.5 kW Voltage: 400 / 460 V Frequency: 50 / 60 Hz Refrigerant: R134a (3.7 kg), hermetically sealed system Max. operating pressure: 20.5 bar CE marking: Present Automation Level: Designed for fully automated manufacturing systems. The laser is engineered for integration into robotic systems, CNC machines, or custom production cells and supports standard interface protocols (Ethernet, fieldbus, analog signals) for industrial automation.