Used Horizontal Machine Center for sale (70,137)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: Siemens 840 D Travel distance X-axis: 1,000 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Tool changer: 80-fold Tool holder: HSK 80 Max. tool weight: 25 kg Max. tool length: 500 mm Max. tool diameter: 228 mm Spindle speed up to: 6,000 rpm Godpjy Nzh Uofx Anlsiu Pallet dimensions: 630 x 630 mm

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, Gsdpfxjy E Np Se Anljiu approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Gijdpfx Anezcla Hjleu Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Godpfx Ast I Ec Donloiu Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Gjdpoy Iwdpsfx Anlsiu Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: good (used), Year of construction: 2014, functionality: fully functional, Travel X-axis: 1,050 mm Travel Y-axis: 920 mm Travel Z-axis: 990 mm Distance pallet surface to spindle center: 75 - 995 mm Distance between pallet center and spindle head: 150 - 1,140 mm Pallet size: 630 x 630 mm Max. table load: 1,200 kg Spindle speed: 45 - 15,000 rpm Tool holder: HSK 100 Tool stations: 60 Max. tool weight: 20 kg Gedey Nkphjpfx Anloiu

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm Giedpjy Er Tgofx Anleu y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: used, Year of construction: 2018, operating hours: 25,500 h, functionality: fully functional, machine/vehicle number: 12630000523, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC460, overall weight: 14,100 kg, Equipment: chip conveyor, We are offering this used DMG MORI DMC 80 H horizontal machining center, year of manufacture 2018. Type: DMC 80 H linear Serial number: 12630000523 Year of manufacture: 2018 Maximum spindle speed: 12,000 rpm HSK-A100 torque: 430 Nm NC rotary tilting table for 5-axis machining B-axis: 360° Godpfey R Ra Nsx Anljiu A-axis: 25°/-200° 2-station pallet changer Tool magazine with 183 positions (3 wheels) Operator panel for loading station Production package Heidenhain TS649 touch probe Tool breakage monitoring 3D quickSet MPC machine protection control Coolant system with 980l / 80 bar through-spindle coolant (IKZ) 10 additional T-slot pallets 630x630 mm Machine weight: 14,100 kg Tool holders and accessories by arrangement Available at short notice, dismantling and loading by arrangement If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2004, x-travel 630 mm y-travel 630 mm z-travel 700 mm Control Meldas M650 tool adaptor HSK-A63 Table dimensions 450x450 mm Table load 400 kg number of spindle speeds 300 - 20.000 min-1 spindle taper HSK-A63 coolant durch Spindel drive motor Ac 45/30KW kW Rapid travel Z=60 m/min rapid traverse X,Z = 120 m/min feed Schnittvorschub =0,1-60 m/min rapid traverse B=120 m/min total power requirement 30 kW weight of the machine ca. 15 t FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Giodpeyqv Azefx Anlsu We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2005, Twin pallet 400 x 400mm, X 560 Y 560 Z 630mm, B 0,001dg. 14.000Rpm BT 40, ATC 60 pos, cooling through spindle, MSX 501, weight 9,800kg Giedpfx Asy R Auronleu

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg SPINDLE & TOOL CHANGER: Gedpfxsx H Ib Ne Anljiu - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: excellent (used), OSP P200M Control Working travels 1000 x 1000 x 900 mm Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Gedpfey Hqv Nex Anloiu Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 48 kVA, torque: 143 Nm, controller manufacturer: SIEMENS, controller model: 840D power line, workpiece height (max.): 800 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, total height: 3,700 mm, total length: 6,500 mm, total width: 3,300 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 16,000 rpm, coolant supply: 70 bar, spindle motor power: 30 W, number of slots in tool magazine: 80, tool length: 320 mm, tool diameter: 150 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HELLER MCi16 840Dpl • Year of manufacture: 2000 • Tool holder: HSK63 • Max. tool length: 320 mm • Chip-to-chip time: 2.8 s • Spindle power: 40 kW • Spindle speed: 45 - 16,000 rpm • B-axis: NC axis (360,000 x 0.001) • Travel X, Y, Z: 630 mm • Rapid traverse speed X, Y, Z: 40 m/min • Feed rate X, Y, Z: 40 m/min • Feed forces X, Y, Z: 10,000 N • Acceleration: 7 m/(s²) • Pallet changer: double (change height 800 mm) • Magazine: chain magazine with 80 positions • 2nd control panel at magazine loading station • Hydraulic workpiece clamping • BLUM touch probe receiver • Interface for 5th axis • SIEMENS PCU • KNOLL VFR (vacuum rotary filter) system and chip conveyor • Coolant chiller unit • Oil mist extraction The machine has been used exclusively for finishing aluminum components and is being removed from production due to capacity reasons. Godpfx Aney Rn H Hsloiu Our company specializes in HELLER machine tools, and the above-mentioned machine has been serviced by us in recent years. A condition assessment was performed on-site and can be provided upon request. The spindle’s tool clamping system was replaced in 2025. The result of the machine geometry measurement will be provided as soon as available. The machine can be inspected under power by serious prospective buyers by prior arrangement. Location: 72379 Hechingen, Baden-Württemberg, ex works

Condition: used, Year of construction: 2022, machine/vehicle number: 246/22, feed length X-axis: 2,000 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, rotational speed (max.): 18,000 rpm, overall weight: 5,000 kg, Designation: Fanum TRIO SP 2W30 Weight: approx. 5,000 kg Number of spindles: 2 Axes: X-axis (width): 2,000 mm Gjdpfx Aney H I Tljlsiu Y-axis (length): 300 mm Z-axis: 300 mm Spindle data Spindle type: ES789 Spindle power (S1/S6): 15 / 18 kW Max. speed: 18,000 rpm Spindle interface: HSK A63 Tool holder: ER32 / ER40

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control Gisdpovgmitjfx Anleu - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, HAAS EC 400 HORIZONTAL MACHINING CENTER 4 AXIS OMEGA DESIGN SOLUTIONS UK Use 15 Haas machines to manufacture high precision components for the Aerospace and race car markets. We use Haas machines from VF1 to the mighty UMC750SS. We have used Haas machines for 15 year and feel they are the best in the market. This EC400, twin pallet horizontal machine The tooling is bt40 , there are tools included in the sale. We can demonstrate the machine or set it up to make your parts if required. Gedsx Urc Topfx Anljiu 2008 machine ready for work Terms and conditions apply

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min Giodpfx Ajyxm Irjnlsu MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, nominal power (apparent): 61 kVA, controller manufacturer: Mazatrol, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 6,100 mm, total width: 3,500 mm, table width: 500 mm, table length: 500 mm, overall weight: 18,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 26,000 W, Equipment: chip conveyor, Dear Sir or Madam, we are offering you a used CNC horizontal machining center "MAZAK" in good condition. Please refer to the attached file for details. Gjdsxf T Txspfx Anljiu

Condition: used, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller model: Fanuc 6M, spindle motor power: 15 W, Technical Specifications Manufacturer: OKK Model: MCH-800 Year: 1989 Axis Travels (X/Y/Z) X-axis: 2006 mm Y-axis: 1000 mm Z-axis: 800 mm Table & Rotary Index Table Table size: 2202 × 800 mm Rotary indexing table: 800 × 800 mm Table load capacity: - Indexing load: 1,500 kg - Flat load: 3,000 kg Spindle Speed range: 30 – 3,000 rpm Taper: BT50 Main motor power: 15 / 11 kW (20 / 15 HP equivalent) Equipment - 50-station Automatic Tool Changer (ATC) - FANUC 6M CNC control - Extremely rigid Japanese construction - Large travels and robust rotary table Hsbnjxyzzyoz T Rm Don Weight Total machine weight: 16,500 kg Column: 8,500 kg Table section: 8,000 kg Description Gijdsxyzzyspfx Anleu This OKK MCH-800 is a classic Japanese horizontal machining center from the era when OKK machines were engineered for maximum rigidity and long-term mechanical reliability. Featuring a BT50 spindle, generous travel dimensions, and an 800 mm rotary table, it is particularly suitable for machining steel components, heavy-duty roughing, and demanding production cycles. The Fanuc 11M control is reliable, easy to maintain, and still fully supported with spare parts.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156592, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 171, No reserve price – guaranteed sale to the highest bidder! Gedpjwu Epasfx Anleiu TECHNICAL DETAILS Travel X/Y/Z: 1,000 x 900 x 1,000 mm Pallet size: 630 x 630 mm Number of pallets: 2 Max. workpiece size: 1,000 mm diameter x 1,000 mm height Max. workpiece weight: 1,200 kg Spindle power: 40 HP Spindle speed: 6,000 rpm Tool magazine: 171 positions Spindle taper: DIN50 EQUIPMENT - Coolant supply through spindle - Chip conveyor

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm Giodpfx Aswqk Umjnlou D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 870 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Fanuc 16iMB, workpiece height (max.): 1,100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 50, Equipment: chip conveyor, rotational speed infinitely variable, Specification Value Machine Type 4-Axis Horizontal Machining Center Pallet Size 500 x 500 mm Number of Pallets 2 (Automatic Pallet Changer) Table Load Capacity 800 kg X-Axis Travel 870 mm Y-Axis Travel 710 mm Godpfx Aey Uvlfonloiu Z-Axis Travel 660 mm B-Axis 0.001° Indexing Spindle Speed 15,000 rpm Spindle Taper SK40 Gearbox Yes Spindle Type Gear Driven Spindle Motor Power Approx. 26 kW Rapid Traverse Rate 50 m/min Tool Magazine Capacity 50 Tools Tool-to-Tool Time Approx. 1.5 sec Maximum Tool Weight 20 kg Through Spindle Coolant Yes Chip Conveyor Included Machine Weight Approx. 20,000 kg Kitamura HX500i Alpha horizontal machining center in very good technical condition. Machine equipped with 15,000 rpm gearbox spindle, SK40 spindle taper, automatic pallet changer (2 pallets), chip conveyor, through-spindle coolant system and FANUC 16i-MB CNC control. Suitable for precision machining and demanding production applications.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: Fanuc 16iMB, workpiece height (max.): 745 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 50, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Specification Value Machine Type 4-Axis Horizontal Machining Center Pallet Size 400 x 400 mm Number of Pallets 2 (Automatic Pallet Changer) Table Load Capacity 400 kg X-Axis Travel 610 mm Y-Axis Travel 610 mm Z-Axis Travel 610 mm B-Axis 0.001° Indexing Spindle Speed 20,000 rpm Spindle Taper SK40 Gearbox Yes Spindle Motor Power Approx. 22 kW Rapid Traverse Rate 60 m/min Tool Magazine Capacity 50 Tools Tool-to-Tool Time Approx. 1.3 sec Maximum Tool Weight 10 kg Coolant Through Spindle Yes Chip Conveyor Included Machine Weight Approx. 10,000 kg Giodpfoy Uvhgjx Anleu Kitamura Mycenter HX400iSII horizontal machining center in very good technical condition. Machine equipped with high-speed 20,000 rpm spindle, gearbox, automatic pallet changer (2 pallets), chip conveyor, through-spindle coolant and FANUC 16i-MB control system. Suitable for high-precision and high-speed machining applications.

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Gedpsxm Sxvsfx Anleiu Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: excellent (used), Year of construction: 2011, feed length X-axis: 813 mm, feed length Y-axis: 508 mm, feed length Z-axis: 711 mm, HAAS EC-500 Horizontal Machining Center Manufacturer: HAAS Automation Model: EC-500 Year of Manufacture: 2011 Control System: HAAS CNC Country of Origin: USA Machine Description HAAS EC-500 Horizontal Machining Center in very good technical and visual condition. The machine is equipped with a dual pallet changer and a 4th-axis rotary table, enabling efficient multi-sided machining in a single setup. Ideal for precision machining and high-volume production. Technical Specifications * X-axis travel: 813 mm * Y-axis travel: 635 mm * Z-axis travel: 711 mm * Pallet size: 500 x 500 mm * Number of pallets: 2 * Automatic pallet changer * Maximum workpiece diameter: 750 mm * Maximum workpiece height: 927 mm * Maximum pallet load: 400 kg * Spindle speed: 8,100 rpm * Spindle power: 22.4 kW * Spindle taper: BT40 / CT40 * Inline Direct Drive spindle * Tool magazine capacity: 30 tools * Tool-to-tool change time: 2.8 sec * Coolant tank capacity: 360 L * CNC Control: HAAS * Number of axes: 4 Equipment * Dual pallet changer * Rotary 4th axis (B-axis) * Tool holders included * Chip conveyor * Coolant system * HAAS CNC Control Gisdpeza Ucrjfx Anlou Condition The machine is in good working condition and can be inspected under power. Test run available upon request. Included in the Price * Tool holders visible in the photos * Machine loading included in the price