Used Horizontal Slot Mortising Machine for sale (66,293)

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter Godpfx Aksg Uq Dfsheui 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 03940027, functionality: fully functional, pressing force: 28 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 20 mm/s, table width: 600 mm, table length: 1,150 mm, table height: 900 mm, distance table to ram: 380 mm, total length: 1,150 mm, total width: 600 mm, total height: 900 mm, overall weight: 560 kg, Description: For sale is an absolutely reliable ROWA bending machine, model T-280, from its original owner. We purchased the bending machine new in 1994, and it has been in our possession ever since and has always been used with great care. The machine is in technically perfect condition and is ready for immediate use. Application: The ROWA bending machine T 280 is a hydraulic horizontal bending machine (also called a bending press) used for edge bending, bending, embossing, and straightening of metal profiles. Technical Data Overview: According to the data sheets, the machine has the following specifications: • Press force: Maximum 280 kN (corresponds to approximately 28 tons). • Bending capacity for flat material: Up to 150 x 25 mm, depending on the bending radius. • Bending capacity for gas pipes: 3/8" to 2". • Stroke adjustment: Continuously adjustable under pressure from 0 to 250 mm (partially specified as 200 mm). • Tool height: Maximum 150 mm. Gusdpfxe Ai Sade Akhsi • Motor power: 3.0 kW drive. • Speeds: Working stroke continuously adjustable up to 0.6 m/min, return stroke 1.2 m/min. • Dimensions and weight: Approximately 1150 x 600 x 900 mm (L/W/H) with a weight of 560 kg. • Construction: The machine table and cylinder are made of a robust cast-iron housing, which ensures high precision and low deformation. Extension: For particularly convenient handling in the workshop, the machine has been sensibly extended: On the rear side, there is a stable, three-part tool holder (bolted on), so that important bending tools are always readily available. In addition, the machine is mounted on a custom-made base, which allows it to be quickly and easily moved at any time using a pallet truck. The machine is available for immediate delivery. Inspection and demonstration are possible by arrangement. Terms of sale and delivery: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading, and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to available documentation. Subject to prior sale.

Condition: repair required (used), Year of construction: 1998, operating hours: 34,188 h, functionality: limited functionality, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, torque: 165 Nm, controller manufacturer: Siemens, total height: 2,500 mm, total length: 10,000 mm, total width: 6,000 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are offering a Starrag Heckert CWK 400D horizontal machining center from 1998, which requires repair. Manufacturer: Starrag Heckert Model: CWK 400D Machine type: Horizontal machining center Year of manufacture: 1998 Guodpo Ah Sn Sefx Akhsi Condition: Requires repair If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, total height: 2,500 mm, total length: 40,500 mm, total width: 2,400 mm, Year of manufacture: 2009 Colour: Blue Empty weight: 30.900 kg Price: On request 4 tool changers, 24 pcs each Plus external magazine 117 positions Drilling unit 2, 4x horizontal only Incl. Oertli tools Max. machining length 6 meters NEXUS Software (HMI) Output table 320x360 cm Operating hours cannot be read out - Year: 2009 - Documentation available: Yes - CE marking present: Yes - Serial number: 113040 - Number of milling spindles [pcs.]: 6 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 Gsdpfezt Nadjx Akhsui - - Min. spindle speed [rpm]: 0 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 20 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - └ Milling spindle 3: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 4: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.5 - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 24 - System/software: Nexus - Safety feature: Enclosed fence, Door interlock switches - Tools included: Yes - CNC options: Unloading system, Loading system, Label machine - Table length [mm]: 6000 - Table width [mm]: 3800 - Installed length [mm]: 26000 - Installed width [mm]: 9500 - Installed height [mm]: 2850 - Transport dimensions: 40500mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 30900kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, and fully functional – ready for operation. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Kombinat “Fritz Heckert” • Weight: approx. 1,700 kg • Work table: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1800 rpm • Power supply: 3x380 V / 50 Hz • Power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse 25 A • Mechanical and automatic feeds in all axes ✔ Equipment: • Robust machine vice on the table • Work light • Cooling system • Complete control panel with adjustment wheels and feeds ✔ Advantages: • Very stable, heavy-duty construction (1.7 tons) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for its durable machines • Fully functional and complete – ready for immediate use • 1000 mm table – allows for machining of larger parts This machine is reliable; it is not a lightweight, cheaply made Chinese product – it is a classic from a time when equipment was built to last. Godpez Slfmofx Akhoui

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm Gusdpfx Aoywnuwjkhsi

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Guodpfx Asxm Sxvjkhji Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location. Gjdpfxjyrf I Ae Akhoui

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Guodpo Aazdxofx Akhji Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Gjdpfx Akjywicvjhoui

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Travel: 0 to 300 Godpfxoz Ingvs Akhjui Stroke: 3 to 52 Weight: 2.5 tons Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 In very good condition

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Guodpfezzymkox Akhji Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Gedoxdttpjpfx Akhjui Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30 Guodpfjz N A T Iex Akhsi

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,250 mm, workpiece length (max.): 1,450 mm, workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,000 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 244, Equipment: chip conveyor, documentation/manual, Horizontal Machining Center Model A99ε with Microcomputercontrol Professional 3 and integrated CNC - Control FANUC System FMS System MMC2 - L2 16 PALLETS Cross movement (X- axis) of the column 1.250mm Heigth movement (Y- axis) of the spindle unit 1.100mm Distance table surface to spindle center 100 – 1.200mm Longitudinal movement (Z- axis) of the table 1.250mm Distance table center to the spindle nose 70 – 1.320mm Gedpfe Ah Ecxjx Akhoui Max. tilting height above pallets 1.450mm Admissable swing diameter in the cabin 1.450mm Pallets – Index table with 360 x 1°- degrees. position tolerance ± 3 arc sec. 2 rotation directions Max. pallet load 2.000 kg (Option: 3.000 kg) Pallet size 800 x 800 mm. Pallet surface with 5 T-slots, 22 mm H8, distance 160 mm, 2-edge locater for fixtures 400  0,01 mm. Compact design as 1 transport unit with 3-point levelling, without foundation. T-bed and machine column in Meehanite-cast iron, inherently rigid bed, bicolumn with symmetric guideways. Guideways as preloaded patched linear ball-guideways. Spindle unit 20 – 12.000 rpm, highly dynamic asynchronus three-phase motor spindle. Intensify torque in the lower speed range with winding switch and digital control. Direct input 5-characters for each speed between 20–12.000 rpm. speed override from 50 - 120 % in steps of 10 % within the selected range by M-Function eligible on and off. power 30 kW (30min) torque max. 420 Nm (25%ED) acceleration 0–6.000 min-1 1,9 s acceleration 0–12.000 min-1 7,1 s deceleration 6.000–0 min-1 1,8 s deceleration 12.000–0 min-1 4,6 s bearing diameter in the main bearing  115/175 mm. Spindle unit with Tool holder for hollow shaft according DIN 69871 AD, ISO - 50 (similar). tool clamping power 19,6 kN Temperatur control of the main motor by controlled circulating oel cooling with electrical throughput control. cooling and lubrication of the spindle bearings with an air-oel-mixture. electronic spindle alignment and positioning. direct tapping with synchronisation of the feed drive in Z-axis via pulscoder in the spindle motor. Max. speed n = 3000 rpm. Feed drive with AC-Servomotors Fabr. FANUC model alpha for X-, Y- and Z-axes, with digital control, in connecting with pre-loaded hollow shaft ball screws for the X-axes and each two ball screws for Y- and Z-axes. Rapid traverses : X-, Y-, Z-axis 50.000 mm min-1 feed rating : X-, Y-, Z-axis 1..50.000mm min-1 Standard measuring system: Tp  0,015mm (VDI DGQ 3441). Tool magazine with 244 storageplaces design chainmagazine, T-order 4-characters, free selectable. Security cover with security switch. average positioning time 9 s tool changing 1,7 s chip to chip 5 s max. tool diameter 125 mm max. tool length 600 mm max. tool weight 20 kg max. unbalance tool weight into the gripper 20 Nm with empty pockets right and left max. tool diameter 300 mm Tool holder for deep taper shafts according DIN 69871 AD, ISO-50

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Godpsx Dlgnsfx Akheui Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes have linear drives Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.

Condition: like new (used), Year of construction: 2007, operating hours: 36,344 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, feed rate Y-axis: 50,000 m/min, torque: 7 Nm, controller manufacturer: Mori Seiki, controller model: MSX 701III, workpiece length (max.): 500 mm, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 8 kg, total height: 2,970 mm, total length: 4,610 mm, total width: 2,650 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 12,900 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 21,077 h, distance table to spindle center: 830 mm, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, This MORI SEIKI NH5000DCG horizontal machining center has undergone maintenance and mechanical overhaul at our workshop. Following the work performed, leveling, geometry checks, and a general functional test were carried out. The machine is fully operational and available for inspection while running. Key features: Year of manufacture: 2007 CNC: MORI SEIKI MSX 701 III Axis travels X/Y/Z: 730 × 730 × 850 mm Spindle: BT40, 14,000 rpm Table: 500 × 500 mm 2-pallet system with automatic changer Table load capacity: 500 kg 60-position chain-type tool magazine Rapid traverse rates: 50 m/min Chip conveyor Machine hours: Power-on hours: 50,392 Working hours: 36,344 Cutting hours: 21,077 Main work performed: Disassembly and overhaul of the Z-axis ball screw, with replacement of bearings Replacement of the bearing pair and seals of the loading/unloading operator plate Machine leveling Geometry check Guodpe Ai T Hzefx Akhji General functional test Otto Machine For over 30 years, Otto Machine has been selecting and trading used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, HÖFFMANN DÜBELFIX DBL Dowel and Slot Drilling Machine In very good condition, this machine comes from a small carpentry shop, and everything is in its original condition; it has only been cleaned. Guodpfx Ao Aiv T Hskhji It can be used to mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2850 rpm Year of manufacture: 1991 With this machine, you can mill slots for, e.g., lock boxes and similar items, and produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. Drilling on two levels, the grid and stops, and the machine's design allow dowel joints to be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Rotates clockwise. Mills and drills very well and cleanly. Comes with 2 angle stops integrated into the machine table and 2 additional stops on the left and right outside of the table. Additionally, you will receive a round stop rail, 2000mm long with a folding stop. This stop rail can be used on both sides, and when switching from one side to the other, the folding stop does not need to be readjusted. The workpiece is clamped using 2 pneumatic clamping cylinders, and the switches are located directly on the clamping cylinders. The height adjustment from one drilling level to another is also pneumatic; the pneumatic switch for this is located at the top of the adjustment lever for the grid. This ensures a quick adjustment of the grids and the drilling levels. Comes with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right. The 2 drilling levels each have a scale with a height indicator, making it easy, quick, and accurate to adjust the height of each drilling level. It can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 320mm. The machine has a stop rail at the front of the machine table, which can be adjusted downwards if required. The max. drilling hole height is approx. 150mm. The max. drilling hole depth is approx. 120mm, with a drilling depth stop. The max. workpiece height is approx. 250mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, so you have no risk when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 800mm wide and 250mm deep. Professional equipment, not cheap DIY junk. Comes with instructions. You can start working with the machine immediately. Comes with a 2-jaw drill chuck up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushes are in good condition and move smoothly. Very stable and rigid design.

Condition: used, total length: 2,500 mm, total width: 1,900 mm, total height: 2,400 mm, Year of manufacture: 1956 Colour: Grey Empty weight: 2.500 kg Price: On request - Year: 1956 - Serial number: 38979 - Drive system: Conventional - Drive type: Eccentric - Model: vertical - Power [kW]: 3.0 - Max. stroke [mm]: 250 - Max. reach [mm]: 420 - Table diameter [mm]: 440 - X-axis travel [mm]: 300 - Y-axis travel [mm]: 300 - Min. stroke speed [rpm]: 33 - Max. stroke speed [rpm]: 110 - Transport dimensions: 2500mm x 1900mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Gusdpo Ai S H Asfx Akhsi

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: 9580-003, overall weight: 570 kg, Equipment: chip conveyor, documentation/manual, This machine requires repair work; a technical report detailing the necessary repairs is available. Due to production upgrades, the decision has been made not to repair this machine. Godpo Akdu Aefx Akhjui A quote for the expected work and a breakdown of the costs are available. Disassembly is not included in the quoted price.

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G X-axis travel: 730 Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Gjdpfxjz Aaukj Akheui Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: good (used), Code: 0423 Brand: ME.SA - ITALY Model: GT 60 S - CE Standard Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Technical data: Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Guedszgt Edspfx Akhsi Overall dimensions mm 850 x 900 x 1900 h Weight kg 390

Condition: good (used), Year of construction: 2006, CNC Horizontal Machining Center, Manufacturer: HÜLLER HILLE, Type: BLUESTAR 5, Year: 2006 Control system: SIEMENS Sinumerik 840D. Travel distances: 700 mm (Y), 680 mm (Z), 700 mm (X) Rapid traverse rate: X, Y, Z: 50 m/min Pallet size: 500 mm x 500 mm Spindle connection: HSK 63, magazine with 40 positions Spindle speeds: Up to 10,000 rpm Chip conveyor, internal cooling system, machine documentation available. Gjdj Aicw Aopfx Akhjui Machine in good condition. Further details can be found in the data sheets.

Condition: like new (used), Year of construction: 2016, operating hours: 10,517 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 500 kg, total height: 3,000 mm, total length: 4,900 mm, total width: 3,100 mm, table width: 500 mm, table length: 500 mm, overall weight: 13,970 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 26 W, Year of construction: 2016 CNC controller: Mitsubishi M-730UM Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 C-axis degrees: 360º (0,001) Feed rates m/min: 70 Rapid traverse m/min: 70 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: Ø800x1000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 37/26/22 Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 120 With free neighboring places mm: 140 Guode Ai Dbrspfx Akhji With occupied neighboring places mm: 70 Max. Tool Length mm: 550 Max tool weight kg: 12 Tool-to-tool time s: 0.9 Chip-to-chip time s: 2.5 Equipment Chip conveyor Internal cooling lubricant supply Signal lamp Tool breakage probe Laser tool measurement for measuring tool length and diameter Heat compensator Helical interpolation Fast fixed cycles Machine running times Spindle Working: 10517 Rated power kVA: 59 Basic machine dimensions / weight Length mm: 4900 Width mm: 3100 Height mm: 3000 Weight kg: 13970

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm 40 ATC DIN40 / Renishaw probing Guodpezxr Twofx Akhoi Pallet size 400mm x 400mm