Used Horizontal Surface Grinder for sale (13,780)

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Rsdpfxjwwkk Io Abdop Safety interlocked lid In good working order

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 30,003,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Rsdpewnn Apsfx Abdjp Horizontal stainless steel tanks – 2 units. Manhole at the front 2.5" outlet at the end. AISI 304.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Redpexqzmkjfx Abdjp Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Rjdpfxoyf Hlij Abdsp Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Double bench grinder Redpfx Absk Iwx Eodop

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- Rjdpfxjwqg Iie Abdep 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Rjdsvxvlzepfx Abdjp Please check out our other listings as well.

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € With stand 2100 € Rsdpfx Aex Ndqrobdsp

Condition: like new (used), Meat grinder with mixer AK RAMOON 32. Redpfx Ajx Ndqfjbdop

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Rjdeb Umtkepfx Abdep

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Rjdpsxtmzxofx Abdjp Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Rjdpfx Asxqfwtobdep Diameter: 2.80m Length: 17.10m

Condition: like new (used), Horizontal carbon steel tanks 73.000l Rodpfxoibh S Ho Abdep Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Condition: good (used), We have 2 cutting mills for sale. The price refers to mill no. 2. The machines were used for cutting plastic but can also be used for processing other synthetic materials. Both are equipped with a liquid cooling system. Technical data (mill no. 1): -Dimensions: 150 × 115 cm / Height: 210 cm -Rotor diameter: 36 cm -Rotor/knife width: 55 cm -Number of knives: 3 (Fixed knives positioned at an angle, which reduces resistance during cutting and shredding, making the machine more efficient) -Inlet: 30 × 53 cm -Motor: 22 kW / 30 hp -Liquid cooling Rsdsuw Skhepfx Abdjp Technical data (mill no. 2): -Dimensions: 150 × 125 cm / Height: 180 cm -Rotor diameter: 25 cm -Rotor/blade width: 52 cm -Number of blades: 3 -Motor: 22 kW / 30 hp -Liquid cooling Prices: Mill no. 1 – €7200 Mill no. 2 – €5900 For both: €11,900 TAG: plastic grinder, shredder, plastic recycling, plastic cutting machine, industrial grinder, cutting blades, plastic milling machine, industrial machine, cooled grinder, recycling machine, crusher

Condition: excellent (used), functionality: fully functional, The MADO Grinder Model: MEW 620 is a heavy-duty, industrial meat wolf (grinder) designed for high-volume, reliable size reduction of meat, fish, and other food products. This model is engineered for continuous operation and easy maintenance. Performance & Throughput Capacity Output 1,400 kg/h High-Volume Grinding: As an industrial grinder, the MEW 620 is built for continuous, high-throughput processing, efficiently grinding large quantities of product. MADO Quality: MADO is a recognized brand in cutting and grinding technology, known for producing durable and reliable machines. Versatile Product Handling: Capable of processing various materials, including fresh, chilled, and sometimes tempered (partially frozen) meats, depending on the cutting set configuration. Operational Benefits Robust Construction: Constructed with stainless steel, ensuring longevity and resistance to corrosion. Hygienic Design: Designed with a focus on hygiene and easy cleaning, featuring accessible components and smooth surfaces for simple washdown. Rodjxxtucjpfx Abdep Safety: Includes visible safety features like an emergency stop button (visible in the image) for operator security. Industrial Application: Ideal for use ahead of stuffers in a full production line.

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, grinding length: 3,150 mm, grinding width: 800 mm, table load: 6,000 kg, grinding spindle motor power: 22,000 W, workpiece height (max.): 650 mm, No minimum price – guaranteed sale to the highest bidder! Redpfxsylk E Ho Abdop TECHNICAL DETAILS Grinding length: 3,150 mm Grinding width: 800 mm Max. workpiece height: 650 mm Table surface dimensions: 3,150 x 600 mm Magnetic chuck dimensions: 3,000 x 600 mm Grinding wheel dimensions: 450 x 100 x 127 mm Max. table load: 6 t MACHINE DETAILS Control system: SIEMENS 840D Total power requirement: 70.6 kW Spindle power: 22 kW Dimensions & Weight Installation space required: approx. 11 x 3 x 2.4 m Machine weight: approx. 15 t EQUIPMENT Coolant system 2,500 l Magnetic holding force regulation Semi-automatic balancing system Note: The control unit boots up, but the MININI grinding software does not load for unknown reasons. The control hardware has been checked and is in order. Backup files are available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Rjdpfx Ajyg D Svjbdsp Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2338, travel distance X-axis: 6,700 mm, travel distance Y-axis: 2,090 mm, travel distance Z-axis: 70 mm, table width: 2,160 mm, table height: 915 mm, table length: 7,340 mm, TECHNICAL DETAILS Rodpfsylk Hdex Abdjp X-axis travel: 6,700 mm Y-axis travel: 2,090 mm Z-axis travel: 70 mm Main drive: 1 x HSD Main drive power: 6.6 kW / 8.9 HP Max. main spindle speed: 24,000 rpm Secondary drives: 2 x ELTE Secondary drive power: 3.7 kW / 5 HP Max. secondary spindle speed: 24,000 rpm Table width: 2,160 mm Table length: 7,340 mm Table height: 915 mm Number of milling heads: 3 EQUIPMENT Vacuum pump: BUSCH MINK Manuals Integrated software

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Rjdeymawzjpfx Abdsp

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Rsdpfxsx Ad Nlj Abdjp Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, A versatile horizontal end borer that can be used for a variety of drilling operations in solid wood furniture components. Optionally the machine can be equipped with a tilting table. -3hp motor - 2800rpm -Drilling unit advancement via hydrocheck unit. -Drilling head with 5 drills which can be rotated through 360 degrees. -Drill interaxis 3 x 32mm ctres / 3 x 20mm ctres. -Max drilling depth 70mm. -Drill connection M10 -Height of drill head and drilling depth adjustable via screws with Siko mechanical digital readouts. -Table with adjustable reference fence adjustable to 45 degrees with pneumatic workpiece clamp. -CE safety protections Rjdpeymnk Nsfx Abdep

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Rodpoyh I Unsfx Abdop Weight: Estimated: Kg 690.0

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: 57228, A Robust industrial meat mincer / grinder Wolfking C250 Uni (1994 model, fully refurbished). Ideal for commercial butchery, food processing, raw pet food production, or small rendering/pre-processing. Redpfxsuh Scis Abdjp Key Specs & Features: • Powerful 50HP motor + Guomao ZDY high-torque helical gearbox • Stainless steel auger + double knife setup • Handles fresh meat, frozen blocks, offal and up to ~10 tons/hour capacity (knife set up / material dependent) • Schneider Altivar soft starter (fitted 2024) for smooth start, energy efficiency & protection • Custom 0.75m³ stainless hopper • 400V 3-phase Condition & History: • Purchased 2021; major refurb £9,500 (motor, gearbox, chassis + hopper; receipt included) • 2024 upgrade £1,500 (new soft starter, controls, emergency stop) • Only ~350 hours light use (fresh chicken carcass, lungs, liver, hearts) – never maxed out • Meticulous maintenance: 3-month gearbox oil changes, food-grade grease post-use Inclusions: • Spare sizing plates & knives • Screw cap tool • Stainless spout/hood guard • Full pre-sale check Dimensions (with hopper): Height 2.3m | Width 1.85m | Length 2.1m | Weight ~1250–1350kg Price: 18000 +VAT Delivery: Included anywhere in England; export to EU/Germany possible (quote on request) Serious buyers only – viewing in Halifax, England welcome (virtual or in-person). Photos, 4 min walk around video, or more details on request. Perfect upgrade for butchers, processors, or raw pet food makers needing reliable industrial meat grinder performance. Contact for questions or to view!

Year of construction: 2007, condition: excellent (used), functionality: fully functional, 1 x Fulton Ltd horizontal steam boiler with upgraded Weishapt 750 kW gas-burner in packaged plantroom. Rjdpfx Abjym Amxjdsp Model of steam boiler - RBC 1000. Serial number of steam boiler – F103114OB. Date of manufacture – 2007. Supplied with all ancillaries in a 7.5m long x 3.21m wide x 3.4m high custom-built container plantroom.

Condition: excellent (used), Year of construction: 2010, Type: PowerGrind280 Rjdpfx Aboyn Ntbodop Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives