Used Hot Glue Bala for sale (17,556)

Condition: used, Year of construction: 1981, National 2-3 Hot Former Gsdpfowl Iw Uox Afnskd induction heater, feeder, straightener

Condition: excellent (used), functionality: fully functional, Operating system Windows 14 zones Gkedsxb A H Hopfx Afnod

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Gsdpjuyk S Aofx Afnokd

Year of construction: 2024, condition: new, - New machine made entirely of stainless steel including washing pump - Automatic basket drive - Touch button to turn the basket outside of the cleaning procedure - Tank cover and mesh filter under the stainless steel basket - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) Gkedpjffqi Uefx Afnsd - Inner basket width 790 mm - Usable height of the basket to the lower edge of the nozzle holder 430 mm - Flat jet nozzles - washing pressure 3 bar - including 30 KG LCT Power Star 50-730 - Stock items, available immediately

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Equipment and technical data: Uniform and constant coating across the entire working width thanks to an innovative technical solution and special vibration dampers that compensate for any deviations on non-smooth embossed panels. Coating rollers: with a special coating made of "acid-resistant synthetic rubber" allow various adjustments and therefore a long service life. Homogeneous DOSING of the glue thanks to adjustable distribution trays. Accident-proof PROTECTION DEVICES on all moving elements ensure optimal safety for the operating personnel. ELECTRICAL SYSTEM: perfectly sealed in accordance with European standards, with push-button control panel, 24 V voltage. Technical data: Working width 1300 mm Working height 100 mm Application roller diameter 185 mm Feed speed 18 m/min Gkedowwnfpjpfx Afnod Drive motor 0.37 kW Working surface height 800 mm Dimensions: Length 780 mm Width 2000 mm Height 1350 mm Weight 340 kg Incl. basin for collecting the water made of INOX steel Incl. upper and lower glue container made of stainless steel Location: Flörsheim Availability: Immediately

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Gsdpfxowb Amis Afnskd Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2025, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. Gksdpfx Afjt It Dvjned SPECIFICATIONS: - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Year of construction: 2020, condition: excellent (used), Punching capacity 165 t max. paper size 760 x 600 mm KAMA ProCut 76 Hot Foil Premium edition Year of construction 2020 Total counter: approx. 2.6 million Equipment packages: Premium Edition: AutoRegister, pneumatic die clamping (only 76 series), punching force indicator with overload protection, universal clamping frame, clamping frame rack, vacuum pump and compressor. Accessories for special applications: Servo main drive for asynchronous drive cycle, up to 50% increased machine speed or longer contact time for hot foil pre- Gedpjwzmx Nefx Afnjkd gation Technical data: Max. Sheet format: 760 x 600 mm Min. sheet format: 279 x 210 mm Max. Punching format: 743 x 585 mm Material thicknesses: Paper from 100gsm, cardboard up to 1500gsm (approx. 1.8 mm) Production speed: Up to 5,500 sheets per hour Punching force: 165 tons Gripper edge: 10 mm

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Gkodpfx Afou Rn Agsnod

Year of construction: 2024, condition: new, New machine made entirely of stainless steel included washing pump - Automatic basket drive - Touch button to turn the basket outside of the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 975 mm - Usable height of the basket to the lower edge of the nozzle holder 450 mm - Flat jet nozzles - washing pressure 3 bar - including 20 KG LCT Power Star 50-730 - delivery, after receipt of payment within 5 - 6 weeks Gsdohcpbbepfx Afnskd - 24 months guarantee - Shipping is possible

Year of construction: 2024, condition: new, functionality: fully functional, Fixed table Vertical casting direction Gedpfexgnxxox Afnjkd Pneumatic clamping unit with 19 kN closing force System details: Year of manufacture: Late 2024, but never went into series production Equipped with 2 vertical nozzles Induction equipment from Ambrell is included but optional for use Extruder/tank unit and cooling devices shown in the image are not included – these were returned to Optimel Two-hand operation for safety Pressure monitoring system Data interface with OPC/UA protocol

Condition: new, Year of construction: 2024, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm oven hight: 860 mm air flow: 6300 m³/h Gkedpfx Afek Utrpsnjd power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: new, Year of construction: 2025, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; Gkjdpevpqp Aofx Afned - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Condition: good (used), machine/vehicle number: 169693, Heidelberg embossing platen TP, machine number T169693 + Heidelberg embossing platen TP, T191298, machine is in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment. Gkedpfx Afsvvikfsnsd

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour counter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel, also available with forklift sleeves - Stainless steel covers - Magnetic descaling device - incl. frame for water tank, 500 l water tank Gkedpfofdkcgox Afnjd - incl. basic accessories such as 20 m high-pressure hose, spray gun, lance, and 25° fan nozzle - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available on request

Year of construction: 2010, operating hours: 50 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: OMMA HGS 314, Roller applicator for hot melt polyurethane adhesives. Usable working width: 1300 mm. Working thickness: from 3 mm to 80 mm. Working speed: from 5 to 25 m/min. Working temperature up to 140 °C. Adhesive applicator roller diameter: 250 mm. Installed power: 15 kW. Power supply: 400 V / 50 Hz / 3+N. Gkodpfx Afoxfb N Isned

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The system is fully equipped with both a melting and a cooling unit. By simply changing the tooling, it can be quickly adapted to manufacture different products. Gkedpfexgnw Ujx Afnod Application area: These systems are typically used for overmolding electronic components, providing reliable protection against environmental influences such as moisture, dust, and mechanical stress.

Condition: new, Year of construction: 2024, Firing chamber output: 49kW Godpfxepn Nyzo Afnokd Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: new, Year of construction: 2024, Asphalt Hot Box / Asphalt Recycler НВ-1/Recycler Asphalt Hot Box / Asphalt Recycler HB-1 is designed to maintain the working properties and temperature of hot asphalt during its transportation from the asphalt plant to the place of work and in its process. High quality thermal insulating mineral wool, which is installed around the working tank, is used for thermal insulation. Gjdpfovprxxsx Afnskd The unit also has the function of asphalt recycling with an infrared heater located at the top. The asphalt is heated on a grate. SPECIFICATIONS: - Volume - 0,4 m3 - Capacity is 2-2.5 tons per 8 hours. - Propane fuel - Consumption - 3-4 kg / h (depending on the outside temperature) - Mechanical control (open fire ignition system)

Condition: ready for operation (used), There are two identical machines available, including documentation. Gksdpfjm Rg R Ajx Afned

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: Gjdpfx Ashgbkuofnokd ----- Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: used, functionality: fully functional, Two YUDO "Bold 3" hot runner units are available for sale. The unit has 12 hot zones and a 63A plug. Spare parts are still available, and a user manual is also available for this unit. L: 150 mm Gkjdpfx Aov Smnasfnod W: 100 mm H: 80 mm

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, parking feet, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12,6kW JTR-H 23/350 | 23l/min. at 350bar | Motor: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Motor: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Motor: Kohler KDW 2204 37,5kW - Dimensions: 3.370 x 1.640 x 1.540 - empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium Gjdpfx Afefdvkzenokd - HD reel: manual with max. 30 m. 1/2" or 100 m. 3/8" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-lime pump with tank - 75 kW heating module - Options and accessories on request

Condition: used, Two Günther hot runner units are for sale, one with 15 channels. L: 470 mm W: 370 mm H: 150 mm Weighs approximately 4 kg Gedjv Sml Sopfx Afnjkd Connector: 16 V/400 A

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection Gsdpfx Afsfh Skaonskd The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.