Used Hot Air Generator for sale (32,938)

Condition: new, Year of construction: 2024, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm Fsdpfx Aajk Utrpe Espd oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Applications: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating during the cold season Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat input: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Fpedpfx Aasxwkw Ej Esd Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2026, condition: new, Stable heating and / or hay drying and hay drying installations and drying cabins assembly in containers plug and play (Directly deployable also rental) installation in container (s) or on location Switzerland and Austria or southern Germany. Fsdekytn Hjpfx Aa Ejpd Power from 80kW to 500kW and on request >500kW. Warm air heaters in stock, new and used!

Condition: new, Year of construction: 2025, flue capacity: 125 kW Fedpfjk Utrhox Aa Eopd Conventional yeld capacity: 99 kW flue diameter: 180 mm hot air delivery pipes: 2 x 250 mm flue length: 750 mm oven width: 560 mm oven hight: 700mm air flow: 6300m³/h power consumption: 1500W aproximate surface to heat up: 1500m³ area to be heated: 300/350 m² heater height without hot air conveying pipes: 1980 mm heater width: 800 mm heater length: 1280 mm weight: 415 kg

Condition: new, Year of construction: 2025, flue capacity: 350 kW Conventional yeld capacity: 279 kW Fodpek Utrtsfx Aa Eopd flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm heater length: 1900 mm weight: 850 kg

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm Fodpfx Ajk Utrwoa Ejpd oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Condition: new, Year of construction: 2025, flue capacity: 34 kW Fpodpfx Aaek Utras Ejd Conventional yeld capacity: 29 kW flue diameter: 160 mm hot air delivery pipes: 2 x 180 mm flue length: 500 mm oven width: 400 mm oven hight: 590 mm air flow: 2200 m³/h power consumption: 400 W aproximate surface to heat up: 500 m³ area to be heated: 100/150 m² heater height without hot air conveying pipes: 1560 mm heater width : 550 mm heater lenght: 920 mm weight: 190 kg

Condition: used, Year of construction: 2023, functionality: limited functionality, We offer for sale a high-performance OMEGA AIR Nitrogen Generator, model N-GEN 100 NGC 2.0, complete with a 480-liter pressure vessel, both in excellent condition. This system is ideal for industrial applications requiring high-purity nitrogen. Nitrogen Generator Specifications (OMEGA AIR N-GEN 100 NGC 2.0): • Inlet Pressure: 8 bar • Outlet Pressure: 6.7 bar • Nitrogen Flow Rate: 49 m³/h • Purity: 99.99% • Oxygen Content: ≤100 ppm • Inlet Temperature Range: +5°C to +35°C • Power Supply: 230 VAC, 50–60 Hz • Year of Manufacture: 2023 • Made in EU • Serial Number: 23AD000230 Fedpswu Dm Refx Aa Ejpd Pressure Vessel Specifications (OMEGA AIR N-GEN 100): • Volume: 480 liters • Maximum Working Pressure: 16.0 bar • Test Pressure: 22.9 bar • Working Temperature Range: -10°C to +50°C • Fluid Group: 2 • Year of Manufacture: 2022 • Date of Hydrostatic Test: 11/2022 • Serial Number: 22PP001267 • PRICE: €19,000

Condition: excellent (used), GEA FlowCook 8000/600. 8 metre cook length, 600mm wide. Excellent condition, has had very little use. Electrically heated. 283 KW Fpjdpox Ili Hjfx Aa Eod

Condition: used, suitable for thermic oil heating (180 kW) Fjdpfx Aaoyn Dc Re Eopd Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. Fjdpfxomgadpj Aa Espd – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, machine/vehicle number: 2026, Unox Bakerlux 3 Shop.Pro Touch Convection Oven New NEW NEW NEW NEW NEW NEW NEW NEW NEW Unox Convection oven for 3 trays 600 x 400 mm Fedpfxsxmrkxo Aa Eepd Stainless steel construction with front glass panel Manual drop-down door Touch control panel with programmable settings Temperature range adjustable up to 260°C Steam injection (humidification) via direct water connection High-performance convection oven Connection: 230V with plug Dimensions: 800 x 811/860 x 425 mm (W x D x H) Oven NEW & SAB tested With warranty + spare parts service Quality from your Unox specialist & service partner! Benefit from over 35 years of experience! Visit our Unox baking center!

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Fpsdpomrrwfjfx Aa Ejd

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid Fedoyizk Iopfx Aa Ejpd steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HD 7/16-4ST + HWE 860, This listing refers to a Kärcher high-pressure cleaner HD 7/16-4 ST in combination with a Kärcher Hot Water Generator HWE 860 (stationary unit). The machine has been inspected in our in-house workshop and is fully functional. High-Pressure Cleaner HD 7/16-4 ST / HWE 860 Kärcher Hot Water Generator Product Description: HD 7/16-4 ST With a working pressure of 160 bar, the pre-configured cold water high-pressure cleaner HD 7/16-4 ST serves as an entry-level unit in the range of our stationary HD cleaners with single-lance operation. Our pre-configured cold water high-pressure cleaner HD 7/16-4 ST comes equipped with various features and offers multiple options for individual upgrades. A dry-running protection system and an operating hours counter are included as standard. The unit allows for the suction of one or two detergents in either high- or low-pressure mode and can be optimally configured to its place of operation thanks to an extensive accessory package (see photos). With 160 bar working pressure, this high-pressure cleaner delivers more than sufficient power to tackle even very demanding cleaning tasks. Kärcher innovations such as the EASY!Force high-pressure gun, which reduces the holding force to zero by utilizing the recoil force of the high-pressure jet, and the EASY!Lock quick-release fasteners (enabling five times faster handling compared to conventional screw connections with no compromise on robustness and durability) support the user. Kärcher Electric Hot Water Generator HWE 860: The electric hot water generator HWE 860 is used in conjunction with the HD 7/16-4 ST high-pressure cleaner and heats water up to 85 °C. Operation of this unit requires proper instruction. Description: HWE 860 Kärcher Hot Water/High-Performance Heater The electric hot water generator offers an output of 24 kW. Its use is especially recommended where burner exhaust emission is problematic or not permitted. Maximum temperature is 85 °C, thermostatically controlled. The unit can be operated manually or automatically. Fodpfx Asymdm Tsa Espd The device is used in conjunction with a high-pressure cleaner. The hot water generator is delivered as a standalone assembly, complete with control cabinet and all necessary components (hoses, cables, clamps, etc.). Optionally, the customer can select between cold and hot water operation via two solenoid valves and opt for a digital timer during configuration. The unit can also serve as an instantaneous water heater—for example, during continuous operation at a flow rate of 700 l/h and an inlet temperature of 15 °C, a temperature of 45 °C is achieved (a temperature increase of 30 °C). TECHNICAL DATA FOR BOTH UNITS AVAILABLE ON THE NAMEPLATES. FOR FURTHER PRODUCT DETAILS ON: HIGH-PRESSURE CLEANER HD 7/16-4 ST HOT WATER GENERATOR HWE 860 WE RECOMMEND CONSULTING THE MANUFACTURER, KÄRCHER. Subject to changes and errors. Do you have any questions, wish for a consultation, or want to view the equipment on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our General Terms and Conditions (GTC).

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Fsdpfxox Altfe Aa Ejpd Please note that the photos probably show two different ovens, both are very similar.

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Fpjdpfsfmim Uox Aa Eod Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Fedpfxowypqro Aa Eopd Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read Fedpjiyu Ifjfx Aa Espd - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, machine/vehicle number: 2026, NEW +++ UNOX Bakerlux 4 Shop.Pro Master Convection Oven +++ NEW Hot air oven Rossella Master with steam Convection oven for 4 trays 600 x 400 mm Stainless steel design with front glass panel Door Master program control Fjdpjxduwcjfx Aa Ejpd Adjustable temperature range from 50 - 260°C Connection: 400V, 16A CEE plug Dimensions: 800 x 811 x 500 mm (W x D x H) Oven NEW with warranty + spare parts service Quality from a specialized company! Benefit from over 35 years of experience! Options: - Baking trays 600x400 - ALU perforated trays 600x400 - Pure water filter - Maintenance contract - Delivery service - Spare parts box - Service package - Instruction & commissioning Visit our large showroom!

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW Fjdpfevnuq Iex Aa Eopd - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 Fpedpoyq Ricsfx Aa Eod - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation Fpedpfxswb Axre Aa Ejd With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: like new (used), functionality: fully functional, Cooking Modes AC (Automatic Cooking): Automatic cooking system with recipe images. Manual Cooking: Fan-assisted (30–300 °C), Steam cooking (30–130 °C), Combination (30–300 °C). Programmable Operating Mode: Up to 15 cooking cycles can be saved, with name, image, and recipe information. Clima®: Automatic humidity control. Fast-Dry®: Rapid dehumidification of the cooking chamber. Functionality Display: Customizable, frequently used programs are displayed prominently. One-Touch Start: Automatic start of cooking. Recipes: Folder structure with preview and intelligent recognition. Screen: 7" high-resolution LCD TFT touchscreen. Operation: Scroll wheel with push function. Controls & Features Auto-reverse: Fan reverse for even cooking. Delta T: Monitors cooking chamber and core temperatures simultaneously. Steam Regulation: Automatic condensation adjustment. Settings: Programmable user parameters. Delayed Start: Scheduled cooking times. Fan Speeds: 6 selectable speeds, automatic heat adjustment. Core Temperature Probe: Four-point probe with external interface. USB Port: HACCP data, software updates, cooking programs. Energy Optimization: SN system (optional). Service Program: Diagnostics, maintenance indicator. Self-Diagnosis: Pre-use check, audible/visual warnings. LED lighting for improved visibility. EcoSpeed: Optimized cooking temperature, reduced fluctuations. EcoVapor: Automatic steam regulation for water conservation. Cleaning & Maintenance LCS (Liquid Clean) System: Automatic cleaning with recyclable capsules. 7 cleaning programs. Manual cleaning: Optional hand shower. Technical specifications Capacity: 7 × 2/1 GN – 14 × 1/1 GN Insert spacing: 70 mm Fjdpfxev Hztas Aa Eepd Space for croissants: 70 / 180 pieces Dimensions: H x W x D 850 × 1170 × 950 mm Weight: 180 kg Power: Total 19 kW, Cooking chamber 18 kW, Fan 0.55 kW Power supply: 3N-AC 400 V, 50/60 Hz, 30 A Base frame Material: Stainless steel Mobile: Yes (with casters) Dimensions: H x W x D 860 × 1170 × 800 mm Financing through our bank is also available. komplett-konzept.leasingo.de

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. Fsdpfx Aaowb A His Espd The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!