Used Hot Holding Equipment for sale (42,469)

Condition: used, Używana instalacja do produkcji biopaliwa wyprodukowana przez firmę Biodiesel Fuels Equipment Ltd UK. Zainstalowana w roku 2012, wyłączona w 2021. Hfodpeyhc Rgofx Af Tsf Wydajność instalacji wynosi 10 000 l na 8-godzinny dzień pracy. Przy pracy w trybie 24 godziny wydajność do 25 000 l na dzień. Była wykorzystywana do przetwarzania zużytego oleju słonecznikowego i palmowego. W skład wyposażenia wchodzą: - 3 szt separatory (zbiorniki separacji) - 2 szt reaktory (zbiorniki reakcyjne) - 2 szt jonizatory, - 2 szt zbiorniki do przygotowania oleju zbiornik do przygotowania metanolu zbiornik na biodiesel.

Year of construction: 2008, condition: ready for operation (used), Highly efficient production line for the production of molded stick ice cream, popsicles and similar products. Capacity of up to 42,000 pieces per hour (can also be used at a reduced hourly capacity). The currently installed mold size is 35ml moldet stick ice cream. Manufacturing date of the line is 2008. Complete line is for sale, including rotary molding system, automatic stick inserter, wrapper, control panels and other components. Full documentation is available. The line was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Approximate space required for installation: 9 x 4.5 m. Hfsdpfopyha Eex Af Tof

Year of construction: 2008, condition: ready for operation (used), The GIF-2000 continuous ice cream freezer (built in 2008) from Gram Equipment is a high-performance freezer that can operate with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yogurt, sauce, etc. The system was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Detailed documentation is available and is included in the offer. Hfodpfxspyhdto Af Tjf

Condition: used, Year of construction: 2008, operating hours: 677 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 298 mm, load center: 600 mm, fuel type: diesel, motor manufacturer: ISUZU, fork length: 1,800 mm, empty load weight: 11,604 kg, total height: 3,550 mm, Equipment: pallet forks, sideshift, Forklift Truck, Used Make: HC Hangcha / EP Equipment Model: CPCD 80 HW 14 Hfodpfxjyy R Ife Af Tjf Year of manufacture: 2008 (Purchased new) Operating hours: 677 Maximum lifting capacity: 8,000 kg at 600mm load center Maximum lift height: 4.50 m Free lift: 298 mm Fork length: 1,800 mm Fork width: 160 mm Engine: ISUZU Diesel, 6 cylinders, 6.5l, 84kW Features: - Fork positioner + side shifter - Baumot diesel particulate filter system - Grammer seat - Lighting system - Built-in trickle charger Dimensions: Length: 3.90 m + forks 1.80 m Overall height: 3.55 m Unladen weight: 11,604 kg Condition: The forklift is in very well-maintained, little-used condition and has always been stored indoors. It was purchased new in 2006 and was only used occasionally for loading the company’s own products. - Batteries (2 x 110 Ah) new - Hydraulic hoses new in 2023 - UVV (accident prevention inspection) expired, inspection log available The forklift can be inspected and test-driven by appointment.

Condition: used, Year of construction: 2008, operating hours: 677 h, load capacity: 8,000 kg, lifting height: 4,500 mm, free lift: 298 mm, load center: 600 mm, fuel type: diesel, motor manufacturer: ISUZU, fork length: 1,800 mm, empty load weight: 11,604 kg, total height: 3,550 mm, Equipment: pallet forks, sideshift, Forklift Truck, Used Make: HC Hangcha / EP Equipment Model: CPCD 80 HW 14 Year of manufacture: 2008 (Purchased new) Operating hours: 677 Maximum lifting capacity: 8,000 kg at 600mm load center Maximum lift height: 4.50 m Free lift: 298 mm Hedpfeyxyz Eex Af Tsff Fork length: 1,800 mm Fork width: 160 mm Engine: ISUZU Diesel, 6 cylinders, 6.5l, 84kW Features: - Fork positioner + side shifter - Baumot diesel particulate filter system - Grammer seat - Lighting system - Built-in trickle charger Dimensions: Length: 3.90 m + forks 1.80 m Overall height: 3.55 m Unladen weight: 11,604 kg Condition: The forklift is in very well-maintained, little-used condition and has always been stored indoors. It was purchased new in 2006 and was only used occasionally for loading the company’s own products. - Batteries (2 x 110 Ah) new - Hydraulic hoses new in 2023 - UVV (accident prevention inspection) expired, inspection log available The forklift can be inspected and test-driven by appointment.

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. Hfjdpfsy Aam Nox Af Tef High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Hedpfowl H Nijx Af Tsff Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: like new (used), Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph Hsdpfx Afef N Nd So Tjff

Condition: good (used), Beer / Brewery Production Equipment 9 qty insulated tanks, approx 1000 lts capacity each 2 qty large tanks, approx 1500 lts capacity each All associated pumps, chiller pump units, wash station. 2 qty tanks with lids, approx 1000 lts each Hsdpfsyg R Azsx Af Tsff 2 qty large tanks with lids, approx 1500 lts each All associated pumps, water filteration system 2 qty timber clad tanks, approx 1000 lts and 1500 ltd capacity each 2 qty insulated tanks, approx 1000 lts capacity each All associated equipment, heat exchanger, pumps,

Condition: good (used), Year of construction: 2020, functionality: fully functional, Mono Omega Cookie Depositor - used - year of manufacture: 2020 - computer-controlled - 2 heads - cutting wire - complete set of working nozzles Hsdpjy Ald Hefx Af Tjff - for 40x60 trays - good technical condition/machine checked and cleaned - collection from warehouse/shipping option available - price on request

Condition: used, This listing is for a Woodley Equipment Clinispin 642E Horizon Centrifuge Hodpjxzh H Sjfx Af Tjff

Condition: used, Year of construction: 2023, Lifting height ca. 4.500 mm weight 1065 kg Hfedexacf Hopfx Af Tjf battery 24.0 V electric work platform like NEW with only about 10 operating hours (!!) Equipment: - mobile electric scissor work platform - for working at great heights - quick and effortless access to higher work areas - large work surface - electro-hydraulic lifting height adjustment (infinitely variable) - operation of the chassis + lifting frame effortlessly using a joystick * alternatively from the ground - chassis offers high mobility and stability - charging cable included in delivery

Condition: used, machine/vehicle number: 92, Continous Form Collator Micro Pack S 50Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Hfodpsrbnnpefx Af Tof Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Nordson Problue 7 Hot Melt Pump Hfsdpfx Aswq S Eysf Tof Model Problue 7

Condition: excellent (used), Nordson Hot Melt Heated Hoses Hodswuqfyjpfx Af Toff 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Facility to connect up to 6 hoses Hedpswq Suuofx Af Toff 10kg Tank Capacity

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Hfodpfxewq Sv Eo Af Tef Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Hedpfju Afi Isx Af Teff Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction Hfsdox E Utispfx Af Tef R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) Hfsdpfx Asri Slmjf Tof - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: RoboRail, type of input current: three-phase, working range: 12,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, overall weight: 6,500 kg, input voltage: 400 V, total width: 3,200 mm, total height: 2,600 mm, total length: 20,000 mm, workpiece weight (max.): 550 kg, table length: 12,500 mm, cutting current: 125 A, working length: 12,500 mm, height adjustment type: mechanical, input frequency: 50 Hz, ambient temperature (max.): 45 °C, RoboRail: All-in-one Robot Plasma Cutting Machine We regularly hear from manufacturers that automation is not for them because everything they do is different, but that is precisely what makes automation so important! With the RoboRail, each individual part can be different and the plasma cutting machine will cut and deliver the parts 1-for-1, directly from the CAD files. Does your project require complex cuts? Send it to the RoboRail. Does your project require a wide variety of delivered profiles? Send it to the RoboRail! This machine will become the workhorse of your factory, giving you time to focus on what your company does best! Easy design input: Import files from SDS2, Tekla, or a Solid model. Or simply draw your design on the machine work surface. Optimal material usage: No more waste with HGG-optimized nesting. The more files you upload, the smarter the nesting process becomes. Hsdpfx Afeq Nz Skj Tjff Seamless processing: Upload your file and RoboRail takes over. Automatic loading of material and accurate determination of starting point. No need for operator intervention during the cutting process. Perfect results, every time: Get flawless cut steel, exactly matching your CAD design. Experience uninterrupted production with seamless repetition. RoboRail ensures readiness for the next production step. This machine is available in several configurations, including variants with different maximum material feed lengths. Based on your selected configuration, we can provide you with an appropriate price proposal. Please refer to our brochure for a complete listing of available options. If you have further questions, please do not hesitate to contact us!

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: Hjdpfx Ajyilnzef Tjff The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure Hfjdpfewg Elljx Af Tsf - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: excellent (used), - Cooking chamber dimensions: 1200x2000 mm Hodewxmn Sepfx Af Teff - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant Hjdpfxsxlt Hfs Af Tjff The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China