Used Hot Water Shrink Tunnel for sale (20,525)

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Kedpfx Agsxpww Ao Njdu Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 00, cooling capacity: 30 kW (40.79 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, pump pressure: 3 bar, Water coolers connected to a single central water supply; coolers can also be used with an internal water tank For sale due to surplus capacity Coolers recently serviced and converted to R422D (next service Sept 2025) Coolers are still operational and can be shut down at any time Kjdpfoxphazex Ag Njdu Total of 2 units for sale

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating Kodpfjxlh Tmex Ag Nodu temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TET MINI M05 - 2200422920, cooling capacity: 7.73 kW (10.51 HP), type of input current: AC, type of cooling: water, overall weight: 71 kg, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 230 V, temperature: 7 °C, volume flow: 0.286 m³/h, pump pressure: 3.342 bar, total width: 486 mm, total length: 660 mm, total height: 623 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo TECH MINI M05 MTA S.p.A. The TAEevo TECH MINI M05 are compact water chillers suitable for indoor installation. Includes buffer tank (open system, not a pressurized tank) and built-in circulation pump. Cooling capacity: 1.73 kW Chilled water temp. outlet/inlet: 7 / 12°C Flow rate: 0.286 m³/h Available pump pressure: 3.342 bar Ambient temperature: 32°C Refrigerant: R 410A Electrical Data: Voltage: 230 V, Frequency: 50 Hz, Phase: 1 Ph Max. power consumption: 1.6 kW Max. current: 7.5 A Kjdexc Ud Tepfx Ag Nedu Starting current: 20 A Protection class: IP33 Dimensions: Length: 660 mm, Width: 486 mm, Height: 623 mm Weight: 71 kg Connection: Rp 1/2" Serial No.: 2200422920 Year of manufacture: 2025 Condition: Visual 2, Technically OK Used Used machines may have visual defects due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2025, Versatile and powerful Pumping out of ponds, pumping out of cellars, e.g. in case of floods, irrigation of flowerbeds Sucks up even water contaminated with sand, cleaning agents or oil, e.g. sewage, mud, ... Approx. 2.5 hours running time with one tank filling at 75% load Robust, durable and reliable Functional in all weather conditions Spiral housing and impeller made of cast iron, thus highest robustness and long service life of the pump, even when used with sandy water Powerful and efficient 4-stroke engine, easy to start in all conditions Robust steel frame with vibration dampers Built-in diaphragm prevents backflow of water Easy to operate Quick and easy start-up by directly creating the vacuum and connecting the hoses to the pump Convenient maintenance Dimensions and weights Length approx. 560 mm Width/depth approx. 430 mm Height approx. 465 mm Weight approx. 36 kg Drive Engine power 4,5 kW Ksdpfx Agshkz Huj Nsdu Fuel petrol Pump Application area dirty water Delivery head max. 26 m Delivery rate 966 l/min Inlet/outlet diameter 76.2 mm Suction height 7 m Grain size max. 27 mm Scope of delivery: 2x hose coupling 2x union nut 2x rubber seal 3x hose clamp 1x suction strainer 1x Hose coupling for suction strainer 4x rubber foot 1x set of assembly tools Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, power: 394 kW (535.69 HP), fuel type: diesel, axle configuration: 6x4, fuel: diesel, wheelbase: 5,100 mm, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Leaf suspension - Radio/CD player - Sunshade flap - Power take-off (PTO) = Notes = The Mercedes-Benz Arocs 4040 6x6 water tanker is a heavy-duty truck specially designed for demanding off-road operations and challenging environments. With its 6x6 drive and powerful engine, this water tanker is perfect for heavy-duty tasks in mining, construction, and other extreme conditions. Specifications: - Model: Mercedes-Benz Arocs 4040 - Drive: 6x6 (Configuration: 6x6, fully driven) - Engine: inline six-cylinder, 12.8 liters, 290 kW (394 HP), 1900 Nm - Transmission: Mercedes PowerShift 3 automatic - Tank capacity: water tank up to 20,000 liters, depending on chassis and configuration - Pump system: water pump MAX. 500–600 l per minute. 6-7 BAR - Chassis: heavy-duty chassis, suitable for off-road terrain - Cabin: spacious cabin with comfort and safety options such as air conditioning - Tank container: made of 4 mm thick, high-quality stainless steel, suitable for drinking water. Options: - Designed in double "D", cylindrical, or elliptical shape - Stainless steel AISI 304 with longitudinal and transverse sealing plates to prevent deformation - One manhole with domed cover, diameter 500 mm, lockable, with vent valve - Water pump for drinking water, hydraulically driven, 500-600 lt./min 6-7 BAR - On/off alarm for low water level at rear and front spray bars - Pressurized discharge via the rear spray bar, operated via the control panel in the truck cab - Pressure discharge via spray bars, operated via the control panel in the truck cab - External suction line pump with 3-inch inlet with mesh, Storz coupling, and valve - Each nozzle has a capacity of approx. 250–350 l/min - The total spray range is approx. 8 meters, both front and rear, with 360° rotation - Lockable hose boxes on both sides made of aluminum, 4 pieces Applications: - Mining: water transport to remote locations and dust suppression - Emergency relief: supplying drinking water in disaster areas - Construction sector: water distribution and spraying for dust control - Agriculture: irrigation and transport of water to remote fields This water tanker offers a combination of durability, efficiency, and flexibility for various water transport applications. Let us know if you need more information or would like to discuss specific customizations! = Further Information = General Information Year of manufacture: 2025 Technical Information Number of cylinders: 6 Engine displacement: 12,800 cc GVW: 33,000 kg Transmission Transmission: 12 gears, automatic Axle Configuration Brakes: drum brakes Suspension: leaf suspension Front axle: Max. axle load: 9,000 kg; steered Rear axle 1: twin tires; Max. axle load: 16,000 kg Rear axle 2: twin tires; Max. axle load: 16,000 kg Functional Number of compartments: 1 Kdsdpsxnbw Refx Ag Neu Pump: Yes High-pressure pump: Yes

Condition: used, This listing is for the Grant JB2 Unstirred water bath without lid The unit is in full working condition and is ready for immediate use Kdsdpfxsxhgdvs Ag Neu The Grant JB2 series of unstirred water baths are reliable, general-purpose laboratory devices ideal for sample warming, media preparation, and quality control. Available in different capacities and configurations, they are especially suited to educational, clinical, and light industrial use.

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Kdedpfjxphqtjx Ag Nsu Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: used, Year of construction: 1972, Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20509 Kdsdswphw Nopfx Ag Nsu Specifications: - 1972 model - Certified to: 05/25 - Unknown hours - 4x4 - Tires (see pictures) - Easy start - Dutch engine - Bucket - Articulated - Brakes have been replaced - Certified - Ready to deliver Description: We have a 1972 Vagner ST-2B Tunnel loader w/bucket for sale. Everything works as it should according to the owner. It is also certified. The brakes have been replaced and checked. Services have been performed by the owner continuously. Ready to deliver Own weight: 1 Year controlled: Yes Year controlled until: 05/25 Model: Tunnellaster

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET702P3-20 - 2200368826, cooling capacity: 136 kW (184.91 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,131 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 23.1 m³/h, pump pressure: 3.19 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit Type: TAEevo Tech 702 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 702 P3-20 is a compact air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valves, 678-litre buffer tank, integrated P3 circulation pump, and winter control down to -20°C. Cooling capacity: 136 kW Chilled water temperature (outlet/inlet, °C): 7 / 12 Flow rate (m³/h): 23.1 Available pump head (bar): 3.19 Ambient temperature (°C): 32 Refrigerant: R410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 70.48 Max. current (A): 119.28 Kdsdpew H N Hmsfx Ag Nou Starting current circuit (A): 235.01 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2131 Connection: Rp 3" Serial No.: 2200368826 Year of manufacture: 2021 Condition: Cosmetic 2, Technically OK (used) Price: on request in Euro (plus VAT, ex works Nettetal) – 3 months warranty Please note: Due to previous use, used machines may have cosmetic imperfections. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Kdjdpfx Agsxn T Nrj Nju Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, axle configuration: 6x4, tire size: 385/65 R 22.5, fuel: diesel, wheelbase: 5,100 mm, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2025, Equipment: air conditioning, = Further options and accessories = - Leaf suspension - Radio/CD player - Sunshade flap - Power take-off (PTO) = Notes = The Mercedes-Benz Arocs 3340 6x4 water tank is a robust and reliable truck, specially designed for heavy-duty transport and off-road use. This configuration is ideal for demanding environments such as mining, construction sites, and remote areas where water supply is essential. Specifications Mercedes-Benz Arocs 3340 6x4 Water Tank: - Model: Mercedes-Benz Arocs 3340 - Drive: 6x4 (two driven rear axles) - Engine: Inline six-cylinder, 12.8 liters, 290 kW (394 hp), 1900 Nm - Transmission: Mercedes PowerShift 3 automatic - Tank capacity: Water tank up to 20,000 liters, depending on chassis and configuration - Pump system: Water pump MAX. 500–600 l per minute, 6-7 BAR - Chassis: High-performance chassis suitable for off-road terrain - Cabin: Spacious cabin with comfort and safety options such as air conditioning - Tank container: Made from 4 mm thick, high-quality stainless steel, suitable for drinking water. Options: - Designed in double “D”, cylindrical, or elliptical shape - Stainless steel AISI 304 with longitudinal and transverse sealing plates to prevent deformation - One manhole with dome cover, 500 mm diameter, lockable, with vent valve - Water pump for drinking water, hydraulically driven, 500-600 lt./min 6-7 BAR - On/off alarm for low water level at the rear and front spray bars - Pressurized discharge via rear spray bar, operated from the control panel in the truck cabin - Pressurized discharge via spray bars, operated from the control panel in the truck cabin - External suction line pump with 3-inch inlet with mesh, Storz coupling, and valve - Each nozzle has a capacity of approx. 250–350 l/min - The total spray range is approx. 8 meters, both front and rear, with 360° rotation - Lockable hose boxes on both sides made of aluminum, 4 pieces Kdodpsxnbw Defx Ag Nsu Applications: - Construction and infrastructure projects - Mining and remote industrial sites - Agriculture and irrigation - Municipal water distribution or emergency facilities This water truck offers a combination of durability, efficiency, and flexibility for various water transport applications. Let us know if you need more information or wish to discuss specific customizations! = Further information = General information Year of manufacture: 2025 Technical information Number of cylinders: 6 Engine displacement: 12,800 cc gross vehicle weight: 33,000 kg Transmission Transmission: 12 speeds, automatic Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 385/65 R 22.5; Steered Rear axle 1: Tire size: 315/80 R 22.5; Twin tires Rear axle 2: Tire size: 315/80 R 22.5; Twin tires Functional Number of chambers: 1 Pump: Yes High-pressure pump: Yes

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use Kodpexhfpdsfx Ag Nodu The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm 14 kW Kdedpfsxg Dtfsx Ag Nou product height: max. ± 120 mm

Condition: like new (used), FTNON Sanitiser tunnel Serial: 330188 Stainless sanitiser tunnel, variable speed, forward / reverse, top mounted jets, side inspection door, conveyor dimensions 3500mm x 300mm, max tray 550mm W x 490mm H, 3Ph Kdsdpfx Ajlpbgweg Nju

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AST2 115 HE - 2200394103, cooling capacity: 315 kW (428.28 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,181 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 53.8 m³/h, pump pressure: 2.99 bar, total width: 2,190 mm, total length: 3,425 mm, total height: 2,537 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / Air-cooled chiller unit Type: Aries TECH AST2 115 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 115 HE are compact air-cooled chiller sets designed for outdoor installation (from -20°C to +48°C), equipped with a shell-and-tube evaporator, four scroll compressors, compressor isolation valves, crankcase heater, phase monitoring, P3 dual pump, 598-liter tank, electric antifreeze heater, condenser filter, and control and switch cabinet. Cooling capacity (kW): 315 Chilled water temperature in/out (°C): 7 / 12 Flow rate (m³/h): 53.8 Available pump pressure (bar): 2.99 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R410A Number of circuits: 2 Compressors: 4 Capacity steps (%): 0-25-50-75-100 Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 158 Max. current (A): 262 Starting current for circuit (A): 507 Protection class: IP54 Dimensions: Length (mm): 3425, Width (mm): 2190, Height (mm): 2537 Weight (kg): 2583 / 3181 (transport / operating weight) Connection: DN 100 (Victaulic) Serial No.: 2200394103 Year of manufacture: 2023 Kedpfx Asw R A S Aog Nsdu Condition: Visual 2, technically OK (Used machine) Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty Used machines may have visual defects due to prior use. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TAG050/HE-BIO-FSH - 2200415896, cooling capacity: 111 kW (150.92 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,253 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 18.9 m³/h, pump pressure: 1.18 bar, total width: 1,110 mm, total length: 3,407 mm, total height: 2,155 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Air Cooler/ Chiller/ Air-Cooled Water Chiller, Type: Taurus TAG 050/HE-BIO-FSH Manufacturer: MTA S.p.A. The Taurus TAG 050/HE-BIO-FSH are compact water chiller units, suitable for outdoor installation, including a hydronic kit (200 l tank + pump), designed for low ambient temperatures down to -20°C, equipped with electronic fan speed control (EC fans). Cooling capacity: 111 kW Chilled water outlet/inlet temperature: 7 / 12°C Flow rate: 18.9 m³/h Available pump pressure: 1.18 bar Ambient temperature: 32°C Refrigerant: R 454B Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input: 51 kW Max current: 85 A Starting current circuit: 302 A Protection class: IP54 Dimensions: Length: 3407 mm, Width: 1110 mm, Height: 2155 mm Weight: 1253 kg Connection: Rp 2 1/2" Serial no.: 2200415896 Year of manufacture: 2024 Condition: Visual grade 1, technically OK Stock unit, as new Kjdpfxow Tbqvo Ag Nedu (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 2501HEX-special - 2200xxxxxx, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,767 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 46.3 m³/h, total width: 2,190 mm, total length: 3,465 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / Air-cooled chiller unit Type: Phönix PNG2 2501 HEX Special Manufacturer: MTA S.p.A. The Phönix PNG2 2501 HE models are compact water chillers suitable for outdoor installation. The unit is Eurovent certified. Equipment features: - xDRIVE controller system - Microchannel condenser coil - Sound-insulated compressor housing - Oversized evaporator and coil; evaporator flow rate: 35 m³/h / 88 m³/h Cooling capacity (kW): 270 Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 46.3 Available pump head (bar): 0 Ambient temperature (°C): 35 Refrigeration circuit: - Refrigerant: R513A, GWP 631, safety classification A1 - Refrigeration circuits (number): 1 - Compressors (number): 1 - Capacity control (%): stepless from 25 to 100 Electrical data: - Voltage (V): 400 - Frequency (Hz): 50 - Phases: 3 - Max. power input (kW): 122 - Max. current (A): 201 - Starting current (A): 314 - Protection class: IP54 Dimensions: - Length (mm): 3465 - Width (mm): 2190 - Height (mm): 2425 - Weight (kg): 3767 - Connection: Victaulic DN 100 Serial No.: 2200xxxxx Year of manufacture: 2023 Condition: visually excellent, technically good Stock unit, new Price: on request in EUR (plus VAT, ex works MTA Italy) – 12 months warranty (Technical modifications and prior sale reserved!) Kdsdpfx Agsxazide Nsu Location: MTA, Tribano

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Water Chiller Type: Phönix PNG2 4302 HEX Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX are compact water chillers designed for outdoor installation. Equipment features include: - Shell-and-tube evaporator - Electronic expansion valves - Shut-off valves for compressors - System equipped with compressors and hydraulic soundproofing panels - Operable at ambient temperatures down to -20°C - Buffer tank and twin P2 pumps - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water outlet/inlet temp. (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration Circuit: Refrigerant: R513A, GWP 631, Safety classification: A1 No. of refrigeration circuits: 2 No. of compressors: 2 Capacity control (%): 12.5 to 100, stepless Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 235 Max. current (A): 385 Starting current per circuit (A): 467 Protection class: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Connection: Victaulic DN 125 Serial number: 2200399999 Year of manufacture: 2023 Condition: Visually 2, technically OK Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may show visual blemishes due to previous use. (Subject to technical modifications and prior sale!) Kdodpjwzay Tjfx Ag Nsu Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET031P5-NF - 2200320880, cooling capacity: 8.98 kW (12.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 331 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.5 m³/h, pump pressure: 5 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler / chiller / air-cooled water chiller Type: TAEevo Tech 031 P5-NF Manufacturer: MTA S.p.A. The TAEevo Tech 031 P5-NF is a compact, air-cooled water chiller unit designed for outdoor installation (from -5°C to +46°C). Features include a crankcase heater, phase monitoring, 115-liter buffer tank, built-in P5 high-pressure pump, open 14-liter expansion vessel, and a non-ferrous evaporator. Kodpfxow S Ef Io Ag Njdu Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 8.98 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 1.5 Available pump pressure (bar): 5 Ambient temperature (°C): 32 Refrigerant: R410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max power input (kW): 6.6 Max current (A): 12 Starting current (A): 47 Protection rating: IP54 Dimensions: Length (mm): 1315, Width (mm): 660, Height (mm): 1373 Weight (kg): 331 Connection: Rp 1" Serial No.: 2200320880 Year of manufacture: 2018 Condition: Cosmetically 2-3, technically OK Used Price: On request in euros (plus VAT, ex Nettetal) – 3-month warranty Used machines may show visual imperfections due to previous use. (Specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2200369334, cooling capacity: 178 kW (242.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,907 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, volume flow: 30.4 m³/h, pump pressure: 3.16 bar, total width: 1,250 mm, total length: 4,660 mm, total height: 2,150 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process air cooler/ chiller/ chiller, air cooled, Type: TAEevo Tech 902 P3-20 MTA S.p.A. TAEevo Tech 902 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crankcase heater, phase monitoring, buffer tank 950 ltr. and built-in P3 circulating pump. Cold water outlet temperatures are adjustable from -10°C to +30°C. Cooling capacity kW 178 Cold water temp. outlet/inlet (°C): 7 / 12 Volume flow (m³/h) 30,4 Available pump pressure (bar) 3,16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. Power consumption (kW) 90 Max. Current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, width (mm) 1250, height (mm) 2151, weight (kg) 2907 Connection Rp 3" Serial No.: 2200369334 Year of manufacture 2021 Condition: Optically 2, Technically ok (used) Price: on request Kodpfx Agep H S Umj Nedu (Subject to technical changes and prior sale!) Used machines may have optical defects due to their use. Location: MTA Germany GmbH, 41334 Nettetal

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET201P3-20 - 2200388835, cooling capacity: 44.2 kW (60.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 998 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 7.53 m³/h, pump pressure: 2.67 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Water Chiller, Type: TAEevo Tech 201P3-20 – 44.2 kW Chiller, MTA S.p.A. TAEevo Tech 201 P3-20 units are compact, air-cooled water chillers designed for outdoor installation (operating range: -20°C to +46°C). Included features: crankcase heater, phase monitoring, 350 liter buffer tank, integrated P3 circulating pump, and winter control (condenser pressure regulation). Chilled water outlet temperatures from -10°C to +30°C can be set. Cooling capacity: 44.2 kW Chilled water temp. (inlet/outlet, °C): 12 / 7 Flow rate (m³/h): 7.53 Available pump pressure (bar): 2.67 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Max. power consumption (kW): 23.69 Max. current (A): 39.83 Kdedpfx Ajw Dddujg Nju Starting current circuit (A): 134.4 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 998 Connection: Rp 2" Serial number: 2200388835 Year of manufacture: 2022 Condition: Visual 2, Technically OK Used Price: On request in EUR (plus VAT, ex works Nettetal) – 3 months warranty Used machines may show visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: TET015P5-NF - 2200320875, cooling capacity: 5 kW (6.80 HP), type of input current: three-phase, type of cooling: water, overall weight: 151 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 0.9 m³/h, pump pressure: 5.2 bar, total width: 560 mm, total length: 1,265 mm, total height: 794 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Air Cooler / Chiller / Air-Cooled Water Chiller Model: TAEevo Tech 015 P5-NF Manufacturer: MTA S.p.A. The TAEevo Tech 015 P5-NF is a compact, air-cooled water chiller unit designed for outdoor installation (operating temperature range: -5°C to +46°C). The unit includes a crankcase heater, phase monitoring, a 60-liter buffer tank, an integrated P5 high-pressure pump, and a non-ferrous evaporator. The outlet chilled water temperature is adjustable from -10°C to +30°C. Cooling capacity: 5.0 kW Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 0.9 Available pump pressure (bar): 5.2 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 4.5 Max. current (A): 8.1 Starting current (A): 29 Protection class: IP44 Dimensions: Length (mm): 1265, Width (mm): 560, Height (mm): 794 Weight (kg): 151 Connection: Rp 3/4" Serial no.: 2200320875 Year of manufacture: 2018 Condition: Visual 2-3, Technically OK Used Kdjdpfx Ajw S Ebvog Nou Price: on request in Euro (plus VAT ex Nettetal) – 3 months warranty Used machines may have visual defects due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET502P3 - 2200403312, cooling capacity: 105 kW (142.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,748 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 17.9 m³/h, pump pressure: 3.42 bar, total width: 1,255 mm, total length: 3,298 mm, total height: 2,119 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller Model: TAEevo Tech 502 + P3 Manufacturer: MTA S.p.A. The TAEevo Tech 502P3 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Adjustable chilled water outlet temperatures from -10°C to +30°C. Includes crankcase heater, phase monitoring, 500-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 105 kW Chilled water temperatures (outlet/inlet): 7°C / 12°C Flow rate: 17.9 m³/h Available pump pressure: 3.42 bar Ambient temperature: 32°C Refrigerant: R410A Kodjt Hr N Iepfx Ag Nodu Electrical specifications: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption: 55.09 kW Max. current: 93.06 A Starting current: 191.65 A Protection class: IP54 Dimensions: Length: 3298 mm, Width: 1255 mm, Height: 2119 mm Weight: 1748 kg Connection: Rp 2 1/2" Serial no.: 2200403312 Year of manufacture: 2023 Condition: Excellent visual appearance, technically in order Stock item, as new Price: On request in EUR (plus VAT, ex works Nettetal) – 12-month warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET602P3-20 - 2200382975, cooling capacity: 116 kW (157.72 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,773 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 19.8 m³/h, pump pressure: 3.37 bar, total width: 1,255 mm, total length: 3,294 mm, total height: 2,119 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller / air-cooled water chiller unit, Type: TAEevo Tech 602 P3-20 MTA S.p.A. Kdsdpfx Agjxpuz Sj Nou The TAEevo Tech 602P3-20 is a compact water chiller unit designed for outdoor installation (operating range: -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valve, 500-liter buffer tank, integrated P3 circulation pump, and winter package for -20°C (condenser pressure control). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 116 kW Chilled water temperature out/in: 7 / 12°C Flow rate: 19.8 m³/h Available pump pressure (bar): 3.37 Ambient temperature °C: 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 60.99 Max. current (A): 102.78 Starting current (A): 218.51 Protection class: IP54 Dimensions: Length (mm): 3,294, Width (mm): 1,255, Height (mm): 2,119 Weight (kg): 1,773 Connection: Rp 2½" Serial No.: 2200382975 Year of manufacture: 2022 Condition: Cosmetic: grade 2, Technically: ok (tested) Used Used machines may show cosmetic wear due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal