Used House Connection Column for sale (18,657)

Condition: used, Year of construction: 1978, pressure 800 t distance between columns 3010 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 1350 mm table surface area 3000 x 1800 mm table height over floor 500 mm side window 1500 x 1400 mm ram surface 3000 x 1800 mm speed down 300 mm/s oil volume 900 l height over floor 5,4 m height beneath floor 2,1 m power requirement 200,0 kW weight 80,0 t Dimensions (WxDxH) 5,2 x 2,6 x 7,5 m SPECIAL DEAL Fpsdovuk Ipjpfx Ad Njf hydraulic high-speed press with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking in upper position maximum stroke frequency 50/min (when using automatic feeding devices) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s Fedpfsvuk Iijx Ad Nepf return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m Fedpfxevuudze Ad Nspf permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Fpsdpfx Adjvut Hno Nof Video at seller's site before dismantling available

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm Fpsdpfsvuk Eusx Ad Nof column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with motor, pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Video of 'sister maschine' available

Condition: used, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,900 mm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! Year of manufacture of the machine: 2023 Capacities / Travel distances: Longitudinal (X): 14,000 mm Vertical (Y): 4,500 mm (*5,076.5) Cross (Z): 1,900 mm * Due to the two horizontal positions of the automatically indexing milling head, the vertical machining area can be extended by 576.5 mm. Table area (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: 12 Width of T-slots: 22 mm Distance between slots: 250 mm FIBRO Rotary & Sliding Table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Paint finish: RAL 7021 (black-grey) Fpsdpfx Aeyu Sznod Nef RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Big Plus Pull stud: DIN 69872 Form A Main drive: Drive type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle 53 kW (S1) Spindle speed range: Spindle speed: 20–4,000 min-1 Max. torque: at S1 – 100% duty cycle 1,531 Nm Max. feed force: X, Y, Z axis: 31,000 N Max. rapid traverse speed: X, Y, Z axis: 25,000 mm/min BASIC EQUIPMENT OF THE MACHINE: Heidenhain CNC control TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor discharge Coolant system with 20 bar & (IKZ) DYNAMICS ACTIVE STABILIZER+ "DAS+ SYSTEM" Cross-axis compensation Automatic milling head change system Operator platform Camera for workspace monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and undergo a comprehensive inspection (deep-dive check). After thorough cleaning, any obvious defects or faults found are professionally repaired by our expert service team.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2018 Capacities / Travels: Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Cross (Z): 1,500 mm Table Size: Length: 6,000 mm Width: 2,500 mm T-slot width: 22H12 mm Distance between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Fpjdpfsyu Swcjx Ad Njf Main Drive: Type: Water-cooled inline motor Motor Power: 100% duty cycle, 43 kW Speed Control: Infinitely variable via water-cooled inline motor with star/delta switching Spindle Speed Range: Spindle speed: 20-7,000 rpm Torque at 37 kW/S1: 900 Nm (1,045/S6) Max. feed force: X, Y, and Z axes: 20,000 N Max. rapid traverse speed: X, Y, and Z axes: 35,000 mm/min Weight: approx. 44,500 kg STANDARD EQUIPMENT: Heidenhain CNC control TNC640 Automatic milling head, diagonal (infinitely variable) Automatic tool changer (40 positions) Chip conveyor Coolant system with 20 bar & internal coolant supply (IKZ) NC rotary table preparation Confirmation for deep hole drilling RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified faults or defects are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2002, Manufacturer: ARISA Type: S-2-630-350-FS Pressing force: 6,300 kN Fsdpjyx S Iwjfx Ad Nepf Table size: 3,500 x 1,450 mm Ram size: 3,500 x 1,400 mm Stroke adjustment: 25–300 mm Installation height: 700 mm Ram adjustment: 300 mm Strokes per minute: 20–70 Control system: SIEMENS S7 Including DIMECO coil line

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min Fodoxwt Nwjpfx Ad Nepf -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 Fedpfx Adjxwtw Uo Nspf -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg

Condition: new, Year of construction: 2026, pressing force: 100 t, Durendus DCD-100 – Hydraulic Deep-Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a hydraulic C-frame deep-drawing press (single-column press) from Durendus with an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep-drawing, and assembly tasks. It is equipped with an integrated deep-drawing cushion and a state-of-the-art Siemens control system. Featuring high travel speeds and precise control, it is ideal for both series production and flexible single-part applications. ===== Technical Data & Information: Hydraulic C-Frame Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / single-column press - Pressing force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm ==== Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler ==== Additional Functions - Deep-drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance available ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operation statuses via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating Fpjdpfxoyw I T Hs Ad Nof ===== Deep-drawing, forming, assembly operations, punching processes, series production, toolmaking Single-column press, C-frame press, deep-drawing press, hydraulic press, industrial press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety guideline NR 12, which is based on these requirements. Our core strengths are special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Fjdpfx Asqa Txqed Nopf Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Motor power: 1 / 1.5 kW Power supply: 380 Volt, 50 Hz Fpsdpfx Adoyhf Izj Nef - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Fpedpfx Adsx U Eiaj Nef Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2412178161400128, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, total length: 3,800 mm, total width: 1,900 mm, total height: 1,790 mm, rotational speed (max.): 40,000 rpm, The following machine is offered for sale: Pfeiffer Gantry Milling Machine SkyCNC WL2412 Fjdpfxeymznzs Ad Nepf Ready to use! Complete package > Set up, connect, operate Condition: used, very good condition, immediately operational Original price was: €98,000 The machine can be inspected on site under power. Additional detailed photos can be provided upon request. Affordable shipping service including a suitable forklift in the truck can be arranged. TECHNICAL DATA: Vacuum table working area: 2500 x 1250 mm (medium format) Spindle: HSD 4.5 kW, 40,000 rpm, HSK E25 toolholder, liquid-cooled Z-axis: 200 mm Minimum quantity lubrication All axes with precision ball screws Incl. handwheel control Incl. automatic tool length measurement (automatic transfer to the system) Machine dimensions / footprint: 3800 x 1900 x 1790 mm Weight: 2,150 kg Year of manufacture: 2015 Tool changer: 10 positions + 8 storage bays for manual change (can also be programmed for automatic change) Power connection: 400V 3-phase, 63A fuse recommended (plug and cable included) Steel frame with high rigidity on 4 adjustable feet with robust linear guides Suitable for machining non-ferrous metals, plastics, and wood Cooling unit with pump (active cool 1500): 230V, 3.8A, max. 900W power consumption, 1500 W cooling capacity Weight: 41 kg, Dimensions: L 450 x W 330 x H 600 mm Vacuum pump (Becker Germany) KVT 3.100 3.4 kW, designed for continuous operation, maintenance-free, 100 mbar vacuum, Weight approx. 100 kg Noise enclosure with insulation, dimensions: L 1050 x W 700 x H 570 mm Computer incl. control software, Fanuc ISO programming language, CAD system, machine setup program, comprehensive manuals on CD Scope of delivery includes further accessories: 10x HSK E25 collet chucks; 6x HSK CentroGrip® MR16 Mini collet chucks; CentroGrip® collet set Ø1 – Ø10 (8 pcs); 2x CentroGrip® collet Ø8; 3x CentroGrip® collet Ø6; 2x CentroGrip® collet Ø10; MR16 Mini collets 1x Ø1, 1x Ø2, 1x Ø2.5, 1x Ø3, 1x Ø4, 1x Ø5, 3x Ø6, 1x Ø7, 1x Ø8, 1x Ø8.5, 1x Ø10; 2 tool tightening wrenches, 1 MR16 spanner, sealing rubber for vacuum table, vacuum fleece pads, 3 plexiglass safety shields, 3D test indicator gauge Terms and Conditions: We guarantee the machine is currently functional. No further guarantee is provided. Statutory warranty is excluded. All risk passes to the buyer upon loading. Payment is 100% in advance prior to loading. An invoice with VAT will be provided in advance and sent as a PDF electronically. Any future costs, losses, or warranty claims arising from the use or non-use of the machine by the customer are excluded.

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Fpedeyfhtnspfx Ad Nsf Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Crane is available 3x!!! Load capacity at full outreach: 125KG Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Slewing range: 300°, connection: 400V 16A Fpedpfxoyzblwo Ad Nef Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Shipping by freight forwarding or pickup by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Rated load at full outreach: 125kg Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Hook height: approx. 2.9 m Total weight: approx. 450 kg Fedpfxoyzblqs Ad Nspf Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.

Condition: good (used), Year of construction: 1975, machine/vehicle number: 2580, functionality: fully functional, spindle mount: MK 4, For sale is an Alzmetall AB 35 pillar drill from 1975. The drill is in good condition and immediately ready for use. Technical Data: • Machine type: Pillar drill • Manufacturer: Alzmetall • Model: AB 35 • Year of manufacture: 1975 • Machine number: 2580 • Technical specifications (typical for AB 35, year 1975): - Drilling capacity (steel): 35 mm - Tapping capacity (steel): M 30 - Column diameter: 120 mm - Throat depth: 293 mm - Table size: 500 x 400 mm - Spindle taper: MK 4 - Speed range: 75 – 2,800 rpm - Motor power: 1.5 / 2.2 kW - Weight: approx. 520 kg - Dimensions (L x W x H): approx. 700 x 1,100 x 2,250 mm Transport and loading can be organized across Europe on request, subject to additional cost. All prices are subject to VAT. Fjdpfx Aeyxm Rysd Njpf Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or would you like to sell yours?

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA138, Technical data: 1 ABUS LS pillar jib crane NL 1000KG Rated capacity at full outreach: 1000KG / 1t Height: approx. 4.3m Outreach: approx. 4m Underside of jib: approx. 3.57m Hook height: approx. 3.3m Total weight: approx. 800 kg Fsdpsyzbkmofx Ad Nopf Incl. 1000KG Abus GM chain hoist Jib year of manufacture 2016 Slewing range 270°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes with load capacities from 80–5000Kg available, please enquire See photos Shipping by freight forwarder or collection by appointment only

Condition: used, Year of construction: 1977, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Fodpfx Aeyxmulod Nopf Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, workpiece weight (max.): 2,000 kg, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Travel X-Axis: 2,000 mm Travel Y-Axis: 620 mm Travel Z-Axis: 520 mm Maximum workpiece weight: 2,000 kg Maximum tool length: 330 mm Maximum tool diameter: 80/125 mm Tool clamping: Disc spring Number of tool stations: 30 Table height: 860 mm Clamping surface: 2,500 x 600 mm T-slot width: 18 mm T-slot pitch: 100 mm Number of T-slots: 5 Distance spindle nose-table: 100 - 620 mm Spindle speed range: 30 - 8,000 rpm Maximum torque: 198 Nm Fpodeyvt Sxepfx Ad Njf Rapid traverse X/Y/Z: 45,000 mm/min MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 5,400 x 3,300 x 3,000 mm Machine weight: 10.5 t Coolant capacity: 250 l

Condition: ready for operation (used), Column Drilling Machine / ALZMETALL AB 3 ES from vocational school Fsdpfjyzakrex Ad Nopf - Well-maintained original condition - Drilling capacity / steel max. 35 mm - Throat depth 280 mm - Table size 600x470 mm - Drilling stroke 180 mm - Morse taper MK 3 - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 480 kg Errors and omissions excepted.

Condition: used, Year of construction: 2009, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 25 / 35 kW max. Torque 130 / 87 Nm tool taper HSK A63 DIN 69893 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load 1.500 kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 rotatable C: 360 ° number of toolpositions 30 pos. tool taper HSK A63 DIN 69893 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 70 kVA weight of the machine ca. 13,0 t dimensions of the machine ca. 7,0 x 6,2 x 2,8 m 5-Axis CNC - Travel Column Milling Machine DECKEL MAHO - DMF 180 New Design - Swivel-Head (B-Axis) - integrated rotary-table - internal coolant system Fpedpfx Adeyhhtge Nef - Operating-Hours: Spindle-Runtime: ca. 10.000h

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing P/N: 5052164040 Diameter: 16"x4 Volume: 191L Year: 2015 Fpsdpjyq Ryhsfx Ad Njf Pressure PS: 0-8 Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up