Used Gwf for sale (15)

Condition: ready for operation (used), sheet thickness steel (max.): 16 mm, power: 30 kW (40.79 HP), total length: 4,900 mm, total width: 2,000 mm, total height: 2,800 mm, empty load weight: 23,000 kg, workpiece length (max.): 4,050 mm, - CNC Frontgauge Gsdpeyr Tgtjfx Abvotw - CNC Backgauge - Highholdsystem - Unloading system Backgauge: CNC Cybelec 7300 High hold system: Yes Evacuation system: Yes

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 1,250 mm, installation height: 1,650 mm, reverse speed: 75 mm/s, total length: 7,100 mm, total width: 5,000 mm, travel distance Z-axis: 1,000 mm, load capacity: 4,000,000 kg, table width: 650 mm, 12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Gedeyp Nydopfx Abvotw Capacity: 4000 ton x 16 200 mm Backgauge: CNC Passage between uprights: 4600 mm (2x) Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Bending length: 16200 mm

Condition: ready for operation (used), functionality: fully functional, controller model: Cybelec CypTouch 12 - 3 Achsen, bending force (max.): 125 t, stroke length: 250 mm, table height: 900 mm, working length: 3,550 mm, The machine control has been renewed! TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Frame distance: 3,050 mm Stroke: 250 mm Throat depth: 320 mm Table width: 120 mm Table height: 900 mm Return speed: 100 mm/s Working speed: 10 mm/s MACHINE DETAILS Control (renewed): Cybelec CypTouch 12 – 3 axes Gtodpfoygxk Tjx Abvsw Oil volume: approx. 250 l Total power requirement: 11 kW Dimensions & Weight Space requirement: approx. 4 x 2 x 3 m Machine weight: approx. 11 t EQUIPMENT Hydraulic tool clamping Crowning system Swivelling operator control panel, front right Free-moving foot pedal Side safety guard (safety grille) Rear safety guard (safety grille)

Condition: used, functionality: fully functional, Year of construction: 1995, Hydraulic Press Brake Fab. MENGELE Type: H 80-2 Year: 1995 Technical Data Make: GWF-Mengele Type: H 80-2 Year of manufacture: 1995 Pressing force: 80 t Bending length: 2,550 mm Frame gap: 2,060 mm Table width: 180 mm Throat depth: 250 mm Stroke: 200 mm Oil capacity: approx. 250 L Operating pressure: 235 bar Dimensions: approx. L 3.85 x W 2.20 x H 2.70 m Weight: approx. 6.2 t Equipment • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Cybelec DNC 800 CNC control • Amada tool clamping system • Automatic upper and lower tool clamping • CNC crowning • CNC die shifting • Support arms Gtodpfjyhc Hujx Abvow • Upper tool, straight, R 0.8 mm, L = 2,350 mm • Lower tool V8/V12, L = 2,350 mm • Operating manual All details without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Gtodpfewcz Axsx Abvow

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW Gtodpfx Aoxz Hg Dsbvjw weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - cutting gap adjustment - stroke rate depending on cutting length approx. 20 - 25 per/min - backgauge with positioning control ELGO 10 - 750 mm - Cutting length adjustment - hydraulic hold-down - front angle stop - front support arms laterally movable Gtodpfx Abeibmaxsvjw - drive 400 V / 15 kW - foot switch - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard Gtjdpfx Abeq R T U Dovsw - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 10883, working width: 3,550 mm, stroke length: 250 mm, pressing force: 130 t, operating pressure: 310 bar, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Table width: 120 mm Column width: 3,050 mm Installation height: 510 mm Throat: 320 mm Stroke: 250 mm Working height: 900 mm Gsdpfx Abexf Au Esvjtw Slide speed, empty down: 120 mm/s Slide speed, full press: 11.5 mm/s Slide speed reduced: preselectable Slide speed up: 100 mm/s Control & Axes Control: Cybelec DNC 80 Axes: Y1, Y2, X, R MACHINE DETAILS Machine weight: approx. 12,000 kg Space requirement: approx. 4,050 x 2,100 x 2,850 mm Operating pressure: 310 bar Oil capacity: 250 l EQUIPMENT - Die shifting with handwheel - 4 stop fingers - Hydraulic WILA punch clamp - Hydraulic AMADA die clamp - 2 support arms - Safe two-hand/foot operation - Various punches and dies

Condition: good (used), functionality: fully functional, Capacity 160 tons --- Bending length 1250 mm --- Stroke 250 mm --- Thrust 500 mm --- Max. installation height 480 mm --- Gedoylcbmspfx Abvotw Weight approx. 11.2 tons --- Power 30 kW --- System tool holder + tools

Condition: good (used), functionality: fully functional, throat depth: 500 mm, pressing force: 160 t, table width: 1,250 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Godpfsx Nxrwsx Abvotw Thrust 500 mm Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm Gtjdpfx Abjytf Ncevow - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing Gedpfeytd S Aex Abvotw – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Innotech ZGW F25 final assembly workstation, assembly station, workstation, workbench Hermes A4L label printer UV light Magnifier lamp PC, monitor, keyboard Gtedpfx Abjx Hwcievjw You are welcome to visit for an inspection. We are happy to organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item's description may occur and are reserved.

Condition: used, Year of construction: 1998, total length: 4,700 mm, total width: 2,550 mm, total height: 2,300 mm, Cutting bench, cutting shear Type: Hydraulic Gtedjwnhlqjpfx Abvjw Manufacturer: GWF Mengele Type: S8-4000 Year: 2005 Control: Siemens Simatic Cutting width: 4050mm Cutting thickness: 8mm Electric Backgauge: 1000mm Throat: 180mm Motor-power: 22kW Incl. multiple frontloader-arms: 2500mm Total dimensions: 4700x2550x2300mm Machine-weight: 13000kg Video available - Year: 1998 - Documentation available: No - CE certificate present: No - Transport dimensions: 4700mm x 2550mm x 2300mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum