Used Hurco Bmc 25 for sale (144)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Kedpjw Nklhjfx Agnjlt Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Klodpfotrhq Hex Agnst Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 Kedpfevh Nbujx Agnelt spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Kedpfop I Hansx Agnslt

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Kodpfxeyyrhaj Agnolt Tool magazine for 24 tools, SK 40 DCF software

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 Kjdpfxjw Tdius Agnelt CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: ready for operation (used), functionality: limited functionality, To be sold as a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 Kodpfx Aet Takaognjlt HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately Price: negotiable

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Ksdpfx Agox H Srljnolt Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Klodpjy R Rn Hofx Agnet Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: excellent (used), Hurco VM20i Vertical Machining Centre (2014) Travels X: 1,016 mm Y: 508 mm Z: 508 mm Table size: 1,168 × 508 mm Max load: 1,800 kg T-slots: 5 × 18 mm Spindle Taper: SK40 / CAT40 Max speed: 10,000 rpm Power: 15 kW Torque: 99–102 Nm Weight: 4,150 kg Footprint: 3.7 m × 3.0 m Height: 2.5 m Additional Features: Year 2014 4th Axis & Tailstock Kledpfx Asy Nzw Aognot Reishaw Probe Tooling

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 610 x 508 x 610mm, Table 762 x 508mm, Spindle speed 40 – 8000 rpm, Spindle taper CAT40, 24 ATC, Klodpfx Agey Ex Haenjt Rapid feedrate 24/30m/min, Spindle motor power 12/9kW, Low volt light, Hurco control, coolant.

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm control Winmax 9 (Upgrade) table-size 1.270 x 610 mm max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm turning speed range - milling ~ 10.000 U/min power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min Klodjx R Enhspfx Agnjt rapid traverse Y-axis 30 m/min rapid traverse Z-axis 20 m/min weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Klsdpfx Asy Tw R Hsgnot Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Kjdpfx Aoy Tw Ryognslt Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: used, functionality: unexamined, Hurco VMX60T vertical machining centre Ksdpfxey Duv Us Agnslt

Condition: used, Year of construction: 2012, x-travel 1067 mm y-travel 610 mm z-travel 610 mm control WinMax (max4) Kodpfx Ajy Sblljgnslt weight of the machine ca. 6350 kg

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Kjdpfew H Awrjx Agnjlt Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Kjdpfsw H Awljx Agnslt Internal coolant supply Spindle cooler

Condition: ready for operation (used), Year of construction: 2005, operating hours: 47,627 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Hurco VMX50S was manufactured in 2005. It features impressive travels of 1270 mm in the X-axis, 650 mm in the Y-axis, and 610 mm in the Z-axis. The machine is equipped with a maximum spindle speed of 12,000 rpm and includes an Ultimax 4 control system. If you are looking to get high-quality milling capabilities, consider the Hurco VMX50S vertical machining centre we have for sale. Contact us for further details. • Largest Motor: 32 kVA • Full Load: 51 kVA • Interrupt Capacity: 10000 Amps • Power Supply: 400 V / 3 Phase / 50 Hz Kljdpfxsy Sg Nps Agnst Additional Equipment • Optional chip conveyor • 2 color monitors, removable electronic handwheel, pocket milling with islands, synchronous thread cutting, 4-axis preparation

Condition: excellent (used), Year of construction: 2010, Winmax control Turning diameter 335 mm Turning length 550 mm Spindle speed 3000 rpm Tailstock 12-position turret with driven tools VDI 40 Chip conveyor, IRCO short bar loader IRS-RBK 1001 Ksdpsy Tqxwofx Agnslt Tool measurement Parts catcher

Condition: good (used), Year of construction: 2021, functionality: fully functional, The machine has 280 spindle hours and 2300 operating hours. Hurco VMX 60 i, Year of manufacture: 2021, Control system: Hurco Max 5, Travel range X/Y/Z: 1524/660/610 mm, SK 40, extra heavy-duty, Chip conveyor, Ksdey S Tt Ispfx Agnelt Spindle speed up to 12,000 rpm, 30-position tool changer, Clamping area: 1680 x 660 mm, Max. table load: 2,000 kg, Network interface (1 x plain text dialog programming on the machine + 1 x for ISO code programming via external programming device or CAD/CAM system) Ethernet interface, USB interface, Trochoidal milling for higher material removal rate, Tool and material library Pocket milling with islands Synchronous thread cutting (thread cutting without a compensating chuck) ISNC extended NC mode Spindle cooler Chip guard enclosure Coolant system Ulti Motion Solid Import Tool change optimization IKZ 20 bar

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Kedpfxsy Tx Nqo Agnslt

Condition: used, Year of construction: 2021, x-travel 1270 mm y-travel 660 mm Klodpfx Agjy Nfabonot z-travel 610 mm weight of the machine ca. 8680 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,050 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details. • Operating hours: 2,050 h Klodpfx Agjy Nab Hsnet Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h Klsdpfx Aoy Naacognet Technical Specification Taper Size SK 40