Used Hydraulic Arm for sale (19,539)

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück oil volume 150 ltr. no. of strokes 18 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears Kdsdpfxexaa D He Ah Dsr * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4,1 x 2,2 x 2,19 m ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch Kdodpfxjxabcqs Ah Der - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness Kdodpfx Ahsxabzgo Der * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 Hub/min oil volume 310 ltr. Kdsdsxaa U Sjpfx Ah Der cutting angle 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 12200 kg range L-W-H ca. 4100 x 2300 x 2235 mm ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 2100 mm plate thickness 6,0 mm ST 42 thickness at "Niro-steel" 4,0 mm VA cutting angle 1,2 Grad no. of strokes 28 Hub/min oil volume 150 ltr. down holder 11 Stück control CYBELEC CybTouch engine output 11,0 kW back stop - adjustable 1.000 mm table height 800 mm weight 4.500 kg range L-W-H 3.010 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness Ksdexaa Acspfx Ah Dsdr * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 4100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 18 Stück no. of strokes 15 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC Cybtouch back stop - adjustable 1000 mm work height max. 800 mm engine output 11,0 kW weight 8.100 kg. range L-W-H 5000 x 2410 x 1650 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system Kdedpfx Aoxaa R Tjh Dor - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch Ksdsxaa Rgspfx Ah Dodr work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück Kdodpfxjxaag Uj Ah Djr no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Ksdpfx Asyy Tqcoh Dsdr Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm Kdodpfx Ajxabrfeh Djr work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system Kodpfx Ahjxabwus Dedr - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: good (used), Year of construction: 1975, working width: 3,700 mm, cutting angle (min.): 2 °, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 12 mm, back gauge: 1,000 mm, oil tank capacity: 500 l, overall weight: 18,400 kg, total length: 4,500 mm, Equipment: documentation/manual, finger protection, For sale: 1 used hydraulic guillotine shear Manufacturer: Darley Model: GS3660x16 Kdodpfx Ahoxfkr Se Dsr Year of manufacture: 1975 Technical Data: Distance between uprights: 3860 mm Cutting angle: 2° Hold-downs: 18 pcs. Oil capacity: approx. 500 l Total power requirement: 22 kW Weight: 18,400 kg Back gauge: 1,000 mm Equipment: - electric back gauge - cutting line illumination - front finger guard - ball rollers on the support table - side gauge - support arms - movable foot switch - operating manual

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Kdodpfx Aowlfdxsh Der Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel Ksdpfev Dm Epex Ah Dsdr 230 Volt Power Supply Price € 3,950

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, Swing diameter over bed: 550 mm Max. machining length: 428 mm Max. machining diameter: 300 mm Ksdpfxjy S R Tls Ah Dsdr Spindle bore: 62 mm Bar machining: 51 mm Spindle nose: A2-6 Motor spindle speed range: 35 - 5000 rpm X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer for powered tools: 12 Tool changer locking: hydraulic Tool changer drive: servo Tool change time: 0.2 seconds Tool holder: cross-section 25 mm Max. speed of powered tools: 5000 rpm Max. power of powered tools: 5 kW Max. milling capacity, shank cutter: 16 mm Max. milling capacity, cutter head: 50 mm Max. drilling capacity: 16 mm Max. threading capacity: M16x2 Rapid traverse rate, Z-axis: 30 m/min Rapid traverse rate, X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: programmable Arbor mount: Morse taper 4 Tailstock travel including quill travel: 565 mm Hydraulic unit tank capacity: 20 L Hydraulic unit pump output: 1.5 kW Hydraulic unit nominal pressure: 3.5 - 6 MPa Central lubrication tank capacity: 2 L Central lubrication output: 25 W Coolant tank capacity: 130 L Coolant pump output: 25 W Continuous motor power: 11 kW 400 V 50 Hz Short-term motor power (30 min): 15 kW 400 V 50 Hz Weight: 4,000.00 kg Dimensions: 2600 x 1685 x 1768 mm Machine scope of delivery: Coolant system, extraction system with filter, tool changer for 12 powered tools, 200 mm hydraulic chuck, Siemens 828D control, 17" touchscreen, programmable tailstock, Renishaw measuring arm, chip conveyor, German operating manuals, CE declaration of conformity.

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Ksdpezrqpkefx Ah Dsdr Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Track length 1330 mm

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Includes the following equipment: Kdjdpfx Ahezqrrqe Dsr CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: new, Year of construction: 2026, BEFARD TB7002 mini crane TECHNICAL SPECIFICATION: • Maximum lifting capacity 3100kg • Range approx. 19m (with optional equipment) • Power supply - 3-cylinder Diesel engine + power supply from 230V, 400 v or 110 v cable - optional Lithium-ion batteries - at an additional cost • Radio control of the device (both device travel and crane operation) Kdodpfjibqirjx Ah Dsr • Hydraulic JIB arm with two extensions • Non-marking tracks (non-marking) • Extendable chassis (78-110cm) • Two operating modes (fast and slow) • Anti-overload system as standard • 4 hydraulically extendable and lowered supports • 900 kg winch + accessories - 50 m rope (optionally 65 m) • Possibility of transporting the device on a trailer up to 3.5t DMC • Support foot pads ADDITIONAL OPTIONS: • Advanced system for visualizing the working range of the crane + radio control with visualization of the working ranges and support spacing • Hydraulic jib search hook • Main arm search hook • Manual jib for hydraulic jib • LED work lamp TB7002E VERSION - powered by lithium-ion batteries - for an additional fee • possibility of working on a cable while charging Possibility to choose a color Possibility to purchase a crane without a hydraulic jib

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine Kdsdpfxjyq Szmj Ah Djr - Operating instructions

Condition: good (used), functionality: fully functional, power: 88.26 kW (120.00 HP), fuel type: diesel, lifting height: 7,000 mm, Year of construction: 2016, operating hours: 7,476 h, Equipment: cabin, pallet forks, Telescopic handler MERLO TF 35.7 (Turbofarmer) Year of manufacture: 2016 According to the hour meter: 7,476 hours 120 hp Deutz engine 40 km/h hydrostatic transmission 7-meter lifting height 3.5-ton lifting capacity - Includes pallet forks - Additional hydraulic circuit to the fork carriage - Hydraulic quick coupler - Tow hitch at the rear - Floating position for the lifting arm - Differential lock - Powerful machine for agriculture! - In excellent optical and technical condition! - Includes CE and COC certificates! - Includes all other documents! Kdjdpezufavsfx Ah Dsr Selling price: 33,900.00 EUR net (including pallet forks) New bucket or new work platform available for an additional charge! Affordable delivery options are also available!

Condition: used, mileage: 689,000 km, power: 397 kW (539.77 HP), first registration: 12/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Volvo Model FH540 6x2-4 VM Tarm Hydr. Year 2017 Condition Very good Serial Number YV2RT60C2JA817239 Ref. nr. 228160 Reg. date: 12-12-2017 Last inspection: 11-12-2025 Hk: 540 Km: 689000 Gearbox: I-shift Eurotype: 6 Ksdpfx Ajzl Nm Ish Dedr Diesel tank: 1 Tank liter: 365 Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: L2H1 Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? VEB+ Tire Size: 385/65 - 315/80 - 385/65 Cover% left 50 - 40 - 40% Front suspension: Air Suspension rear: Air Wheelbase: 3200 mm Toolbox: ? Hydraulic system: VM Tarm LS control Total weight: 26000 kg. Net weight: 9300 kg.

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück Kjdpoxaci Eofx Ah Dodr no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Kedpfxozk Dfpe Ah Djdr Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Crowning: Manual crowning at every arm except the first and last Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: refurbished (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: HS- 1513, turning height: 4,800 mm, workpiece weight (max.): 100,000 kg, turning diameter over cross slide: 8,000 mm, turning diameter: 14,700 mm, faceplate diameter: 6,300 mm, spindle speed (max.): 1,500 rpm, year of last overhaul: 2024, power of the servo motor: 100,000 W, Technical characteristics: Face plate diameter: 6300 mm Max. swing with extended arm: 11200 mm Maximum height of the workpiece: 4800 mm Max. turning diameter with column near the faceplate: 8000 mm Max. diameter of workpiece clamped on floor grid (for internal machining): 14700 mm Max. diameter for internal turning: 16000 mm Infinitely variable rotation of the faceplate: 0.5 – 20 rpm Max. workpiece weight: 100 tons Milling spindle max. speed: 1500 rpm 2-speed gearbox with 15 kW Siemens motor Manual clamping ISO 60 taper tool The machine was completely retrofitted during 2024-2025 and equipped with the following brand new components: - New electrical cabinet made with CE components (Siemens, Schrack, etc.) - New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers with a 1/5 ratio - New ballscrew on 2 axes (vertical head and crossrail) - New scales on 2 axes Heidenhain - The hydraulic and support systems made with CE components (Rexroth, Brevini, Atos, etc.) - New lubrication system DROPSA-Italy or similar - Geometrical precision compliant with ISO standards (as a new machine) The machine is disassembled into transport units and is ready for shipment in a warehouse in Romania. Transport units: - 6.4 x 3.3 x 0.7 meters - 24 tons - 6.4 x 3.3 x 0.7 meters - 24 tons Kdsdpfx Aezmyhroh Der - 11.5 x 3.1 x 0.95 meters - 18.5 tons - 4 x 2.66 x 2.7 meters - 21.5 tons - 9 x 2.6 x 0.8 meters - 18.5 tons - 9 x 2.6 x 0.8 meters - 25 tons - 6.75 x 2.38 x 1.0 meters - 16.5 tons - 6.75 x 2.38 x 1.8 meters - 24 tons - Additional loading area for accessories, 4 trucks, 6 x 2 x 2 meters – 18 tons each

Condition: used, Catalpa arm-mounted flail mower • Working width: 1500 mm • Self-contained hydraulic system • Ready for immediate use Kjdpfx Aozumi Esh Dsdr Condition: Used