Used Hydraulic Scissor for sale (17,075)

Condition: used, Year of construction: 2002, operating hours: 7,646 h, fuel type: diesel, Empty weight: 24.700 kg Lifting capacity: 1.000 kg Working height: 2.830 cm Hodpfx Aswg Rc Asg Nsfn Serial number: 2103910 Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 7.15x2.5x4.2 Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2003, machine/vehicle number: 42058, Offer 20223 Technical data: Hfedpexdivyjfx Ag Non - Operation via hand-held remote control with cable - Load capacity: 1000 kg - Platform size: 1250 x 800 mm - Min. lift table height: 280 mm - Max. lift table height: 950 mm - Lift stroke: 670 mm - Hydraulic drive: 400 V / 1.1 kW - Required space: approx. W 1300 x D 900 x H min. 280 mm - Weight: approx. 150 kg - Mobile undercarriage

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Hfsdpfx Agehlnzno Njn Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: new, Year of construction: 2025, Genie GS3232 NEXT GENERATION E-Drive scissor lift with hydraulic outriggers, new, used - demo machines available Hfedpfx Agerqfn Us Nen

Condition: ready for operation (used), Hydraulic Self-Propelled Scissor Lift Simon Aerials (Cork) SH 120 E, Used Equipment Hfjdpfx Agsu Hitfe Non Manufacturer: Simon Aerials (Cork) Model: SH 120 E Year: 1993 Minimum height: 1.7 meters Maximum height: 10 meters Load capacity: 700 kg Load capacity with extended platform: 227 kg Maximum tilt angle: 3.5 degrees Electric Drive Overall dimensions: 4000 x 1800 x 2860 mm Weight: 4440 kg

Condition: used, Year of construction: 2004, operating hours: 5,834 h, fuel type: diesel, Empty weight: 15.500 kg Lifting capacity: 1.000 kg Hfodpfxjwbnmns Ag Njn Working height: 2.300 cm Serial number: 03104474 Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg Hsdpfsixq Hnjx Ag Nsfn very good condition, almost as new

Condition: used, Year of construction: 2003, fuel type: diesel, Empty weight: 15.500 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Serial number: 03104312 Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Hfedpfswz Uuxsx Ag Nsn Please contact PFEIFER GROUP for more information

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hfodpel Nbqcjfx Ag Njn Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Year of construction: 1999, operating hours: 1,239 h, fuel type: diesel, Empty weight: 14.800 kg Lifting capacity: 1.000 kg Working height: 2.250 cm Serial number: 992054 Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Hfjdpfx Ajwkdmcjg Nen Tyre brand: - Transport dimensions (LxWxH): 5.74x2.55x4.1 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, operating hours: 3,374 h, fuel type: diesel, Empty weight: 24.680 kg Hjdpfxswfccxj Ag Njfn Lifting capacity: 1.000 kg Working height: 2.830 cm Serial number: 1200018435 Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 7.15x2.5x4.2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, operating hours: 385 h, Empty weight: 2.350 kg Lifting capacity: 227 kg Working height: 1.175 cm Serial number: GS3232A-115248 Front tyres / undercarriage remaining: 40 Hsdpfxsw Ruv To Ag Nofn Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.44x0.81x2.43 Please contact PFEIFER GROUP for more information

Condition: used, Electro Hydraulic Scissor Fork Lift Pallet Truck Scissors lift truck, pallet lift truck Hfjdpfeg D H Ivjx Ag Nsn TOYOTA / BT type HTH 10 E serial no. 481795 year of manufacture 2005 lifting capacity 1000 kg lifting height max. 800 mm overall height lowered 85 mm Fork length 1190 mm - electric lift via 12 volt battery - manual lift via hand lever as for lift truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - long stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with cold appliance plug) own weight 140 kg good condition

Condition: good (used), Scissors lift table / roll; hydraulic Overall size: 450 x 1000 mm; H: 1150 mm Load capacity: 500 kg Hydraulic unit: 1000 x 400 x 700 mm Hsdpfx Ash Euwrsg Nefn

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards. Hfsdpfxsxmvawo Ag Nen

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Hodpfevgnr Aex Ag Njfn - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter Hfedpfxjv Dm Epe Ag Non With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 Hfedpfx Ascmat Ueg Non pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Hjdpfxot A U Irs Ag Njfn Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: used, functionality: fully functional, Electric Scissor Lift. Hfjdpfx Agewgcyms Non It is electrically operated and has metal side legs. Good working condition. Please check out our other listings as well.

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. Hedpfx Agswunldo Nsfn The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Power 1.5 kW Weight 369 kg Dimensions 1520 x 1400 x 1370 mm

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Hfedpfxjvgntts Ag Nsn

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 2000 tons Composite press hydraulic (isothermal) Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) The press is connected and 100% complete. ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Hodpow Hridefx Ag Njfn Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 145 tons YOM: 1986 The press is connected For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal. The press is equipped with a sliding table. - Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product; - Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet; - Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds; - Sheet stamping and sheet forming processes. The press has the following working and structural units and assemblies: - Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press. - Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides. - Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position. - Ejector mounted on the lower console (table). - Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering. - Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump. - Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame. The D 2243 press is operated via a remote control panel. 27/08/2025

Condition: like new (used), operating pressure: 152 bar, power: 11.77 kW (16.00 HP), Hand starter, two-cylinder, with four-stroke engine Operating pressure: 152 bar Engine performance: 16 LE Overall Size: 1150 x 600 x 900 mm Hfjdpfx Aotp Hafeg Nen Condition: New Like

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Hsdpfxovgnhwo Ag Nsfn