Used Hydraulic Deep Drawing Press for sale (28,326)

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Bdjdpfx Ajdzp Tcjl Uog Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Year of construction: 1952, Type of machine: Bdsdswxw H Espfx Al Usg Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Bodpelyr Adjfx Al Uedg

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Bdsdoy Aafrepfx Al Uog

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm total power requirement:7,5 kW Bodpjfxyi Iofx Al Uodg weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2975/1999, functionality: fully functional, operating hours: 20,637 h, power: 48 kW (65.26 HP), input voltage: 400 V, pressing force: 100 t, stroke length: 820 mm, operating speed: 470 mm/s, reverse speed: 447 mm/s, table width: 1,000 mm, table length: 720 mm, table height: 950 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 910 mm, oil tank capacity: 2,100 l, total length: 3,100 mm, total width: 2,300 mm, total height: 4,850 mm, overall weight: 17,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, The machine was used in single-shift operation for prototype production, with CNC 50 control, impact damping, drawing cushion force of 400 kN, stroke of 150 mm, drawing cushion area of 600x550 mm, and regular UVV inspections. Includes a light curtain and a mechanically adjustable depth stop. Features hydraulic die clamping. Dismantling and transport are not included in the price. Bedpfx Aljzkrl De Usdg

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) Bdjdpfx Aeg Iihwol Uog f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Bjdpfjy Rtg Eex Al Ujdg

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Bedpsdyynvefx Al Uedg Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Year of construction: 1986, condition: like new (used), Used PJ Hare ltd C frame hydraulic press for sale: Pj Hare Limited hydraulic press for sale PRESS MODEL: 25HP Overall Height MM: 2425 Overall Width MM: 1120 Overall Depth MM: 1470 Weight KG: 2000 Fixing Hole dio. MM: 18 Fixing Hole Centres MM x MM: 610 x 1108 Fixing Pad Size: MM x MM: 120 x 250 Oil Capacity L: 50 Air Supply Pressure Max bar: 6 Air Supply Pressure Min bar: 4 Main Motor Power kw: 7.5 Motor Fuse Rating A: 20 Complete with cushion Electrical Supply Details: Minimum Fuse Rating A: 35 Minimum Conductor Size mm: 2.5 PAGE 2: Model 25HP: Capacity Tons: 25 Capacity KN: 250 Ram Force Tons: 3.1 Ram Advance Speed: 425 Ram Pressing Speed: 35.1 Ram return Speed;289 Motor Racing KW:7.5 Weight KG Approx: 2000 Max Stroke: 150 Guard Aperture Width: 680 Guard Aperture Height: 300 Min. Shut Height: 200 Max. Daylight: 450 Shut Height Adjustment: 100 Throat Depth: 250 Bed Height: 900 Bed Width: 650 Bed Depth: 480 Front to Centre Line: 250 Clearance hole dia: 150 Clearance under bed: 350/ 250 Tee Slot Details: 18,15,34,33 Bed Thickness: 95 Side Chute Width: – Vert Chute Width: 255 Hole in Throat Width: 250 Bedpohcfyusfx Al Uodg Hole in Throat Height: 250 Top Platen Width: 420 Top Platen Depth: 220 Top Platen Fixing Hole Details: 370, 170, 13 Tool Holder dia: 40 Tool Holder Length: 65 Fixing Hole dia: 18 Overall Depth: 1400 Overall Width: 900 Overall Height: 2450 Fixing Hole Centres: 1110 Hare presses for sale New c and h frame hydraulic presses for sale

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press Bjdpfjupbdgsx Al Ujdg -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Year of construction: 1994, condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Bdedpfx Aenxk I Rjl Ueg

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: Bdjdpfx Ajzh Edbsl Usg - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Bsdjzxwzmspfx Al Usdg Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Bodpfxjhcfzks Al Usdg Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 Bedpfehcnxrjx Al Ujdg New hydraulic presses for sale

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm Bedpfx Asd E Irmjl Uedg pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Bsdpfxszbvm Io Al Uedg Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2001, condition: good (used), Offer 20202 Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls Bdodpfxop Dt Tao Al Ueg - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Bdjdpfx Aezv T Iwsl Ujg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 120 mm, table length: 3,200 mm, throat depth: 230 mm, ram plate length: 3,200 mm, distance table to ram: 390 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125 × 3200 MTP-3212 Touchscreen Control The MTP 125 × 3200 hydraulic CNC press brake is designed for accurate and efficient sheet-metal bending. It delivers 125 tonnes of pressing force and offers a maximum bending length of 3200 mm. The machine can process sheet metal up to 6 mm thick. It is suitable for workshops and manufacturers operating in electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive, aerospace and other metalworking sectors. CONTROL AND EQUIPMENT - X-axis back gauge with servo drive - Y-axis beam adjustment with servo drive - Manual R-axis back-gauge finger height adjustment - Back-gauge travel: 600 mm - Two front material supports - AMADA-style quick punch-clamping system - Mobile controller - Control panel mounted on a movable arm - LED working-area lighting MTP-3212 CNC CONTROLLER The MTP-3212 features a large colour touchscreen and an intuitive, user-friendly menu. The software automatically calculates the bending angle, simplifying machine setup and improving production efficiency. The controller can store data for up to 40 punch types. HIGH-QUALITY COMPONENTS Bodjytp N Hspfx Al Uodg The hydraulic system uses high-quality German Rexroth valves. The electrical system incorporates Schneider Electric components, while safety components are supplied by Omron and Schneider. Steel hydraulic connections significantly reduce the risk of future leaks. SAFETY EQUIPMENT - Clearly visible safety markings - Side guards - Rear safety gate - Easily accessible emergency-stop switches - Safety light curtain preventing accidental access between the punch and die The machine is supplied with a Polish-language operating manual and a CE Declaration of Conformity. TECHNICAL DATA - Maximum sheet thickness: 6 mm - Pressing force: 125 t - Maximum bending length: 3200 mm - Distance between columns: 2700 mm - Throat depth: 320 mm - Ram stroke: 120 mm - Maximum opening height: 390 mm - Back-gauge travel: 600 mm - Motor power: 7.5 kW - Weight: 7500 kg - Dimensions (L × W × H): 3870 × 1550 × 2400 mm - Front supports: 2 - Controller: MTP-3212 - Punch clamping: AMADA-style quick clamping TECHNICAL SUPPORT Our specialists can assist with planning bending sequences for complex parts, selecting suitable materials and tools, and choosing optimal working parameters. Pre-purchase technical consultation is also available to help select the correct machine and accessories. Delivery can be arranged. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Bdjdozkg Igepfx Al Uog Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Bsdpfxsyxgr Ro Al Uedg

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Bodjzqzcrspfx Al Uodg

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C Bdedpfx Ajwz Et Ssl Usg - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm