Used Imagesetter Poland for sale (1,346)

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 6 bar, total height: 1,270 mm, total width: 1,500 mm, pressure: 6 bar, type of input current: AC, empty load weight: 300 kg, input voltage: 230 V, heating capacity: 9 kW (12.24 HP), water tank capacity: 300 l, rotary table diameter: 1,000 mm, table load: 300 kg, table width: 1,000 mm, The ROT1000 rotary basket washer is a combination of modern technology and precision workmanship at every stage of the washer's development - this is, in short, the definition of an innovative design that will facilitate the process of washing large-size parts. The rich equipment of the device will provide us with high efficiency, economy and reliability at the workplace. A motor-driven rotary basket and spray nozzles increase the efficiency of the washing process. Parts undergoing the process are placed on a circular basket that rotates around its own vertical axis. The fully automatic control panel controls the work of the washer. STANDARD EQUIPMENT OF THE WASHER: - Sensor for disconnection of the closing lid when opening it during the washing process, Knsdpfx Aeq I N S Hsfwea - Liquid level sensor in the tank, protecting against dry operation, - Liquid temperature sensor, - One adjustable, stainless steel spray arm from the renowned spraying company System - Mechanically rotating basket, - Dual filtration, - Coarse insoluble impurities filter (1mm mesh filter), - Drain valve

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 9 t, total length: 3,100 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 750 kg, operating temperature: 200 °C, Equipment: CE marking, documentation/manual, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Kodpsiimw Aofx Afwjna Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Knsdpfxjytcmre Afwja Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, What is controlled jacking? Controlled jacking is a trenchless technology that allows underground installations—such as water pipes, sewage pipes, power cables, electrical cables, telecommunications cables, fiber optic cables, water pipes, and sewage pipes—to be laid without the need for extensive excavation. The jacking machine is hydraulically driven and equipped with a pilot head that can be used to correct the path of the jacking. Thanks to measuring systems, the operator controls the depth and direction of the jacking, which allows for high precision, even with passages several dozen meters long, in situations where accuracy and precise avoidance of obstacles in the terrain are important in order not to damage the existing infrastructure and to safely bypass it. This solution is particularly valued in places where earthworks are difficult or impossible, e.g., under roads, lawns, tram tracks, parking lots, sidewalks, or urban areas. Why use controlled pipe jacking? Controlled pipe jacking is an alternative to traditional excavation, eliminating the need to dig up the surface. This method significantly reduces the time needed to complete the project, lowers the cost of restoring the site to its original condition, and minimizes the impact on traffic and the environment. The most important advantages of controlled pipe jacking technology: - no need to interfere with above-ground infrastructure, - the ability to work under obstacles (e.g., roads, sidewalks, lawns, property entrances, railroad tracks), - reduction of noise, - vibrations, and environmental pollution, - high route accuracy, - quick mobilization of equipment and short completion time, - lower risk of collision with existing installations. - no need to use bentonite slurry, - no spoil during jacking Thanks to these features, controlled jacking is commonly used in the construction of municipal networks, water and sewage connections, gas, fiber optic and cable connections. Application of controlled jacking Controlled jacking is ideal wherever installation is required without disrupting the surrounding area. The most common applications for jacking machines are: - crossings under roads and streets with heavy traffic, - jacking under railway and tram tracks, - crossings under watercourses and canals, -installations under sidewalks, parking lots, squares, and industrial areas, - connections to properties without digging up the entire area. With the ALUSTEER product, no drilling mud (bentonite) is used, which significantly reduces implementation costs and environmental impact. This technology can be used both in cities and in non-urban areas – wherever precision, speed, and reduced impact are important. Accuracy and direction control Ksdpfexxhzwex Afwsna Modern jacking machines use sensors that enable continuous monitoring of the head position. The operator tracks the parameters on the receiver and operator tablet and reacts in case of deviations from the planned route. Such solutions ensure: - high precision of the breakthrough, - safety for the existing infrastructure, - repeatability and predictability of results. In practice, deviations from the jacking axis are usually no more than a few centimeters, which is fully acceptable in most projects.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Kedpefy T H Ijfx Afwsna 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 64,000 kg, workpiece weight (max.): 18 kg, 1. Forging hammer HUTA ZIGMUNT type MPM 2000A Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 62.5 ton Anvil weight: 45 ton 2. Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1 250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 2600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg 3. Inductive heatinfg device AEG ELOTHERM 400 kW Kjdpfjlnllbex Afwena A numbers of different inductors are available in the set.

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Kedpfxelnlmvs Afwsna

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Kodpfoymm D Iox Afwona Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2019, operating hours: 198 h, functionality: fully functional, Magnus Trendsetter Achieve 800 V Manual S Model TEE Knedpfx Aezlr H Djfwea Year of manufacture 2019

Condition: used, Year of construction: 1990, Engine power: 2 hp Ksdpfx Ajx Edl Sefwona

Condition: used, Year of construction: 2014, Resolution: 2400 dpi Manual plate feed line Speed: max. 21 plates/hr Maximum plate size: 838 x 990 mm Minimum plate size: 267 x 215 mm Knedpfx Aewv Eahefwoa

Condition: good (used), Xcalibur 45s Elite with new laser, old laser is also still available. Knsdpfxoxcurqs Afwja

Condition: good (used), Year of construction: 1970, Manufacturer: Metalexport Poland Year of manufacture: 1970 Type / Model: TUE 40 Machine number: 8604 Control: conventional Distance between centers: 1,500 mm Spindle bore: 38 mm Center height: 210 mm Turning diameter over bed: 420 mm Knjdpfov N Tu Ijx Afwja over carriage: 240 mm in gap: 600 mm Speed range: 22.4 to 1,000 rpm Feed: Connection: kW Accessories/Equipment: fixed and traveling steady rest, 4-way tool holder, 200 mm 3-jaw chuck, coolant system Condition: good Weight: approx. 2.5 t Dimensions: 2,800 x 800 x 1,200 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, Laser Moduls for Heidelberg Suprasetter, second hand, tested Knjdod Aq U Uepfx Afwsa GEN II, class 160 mW, 64 diodes, 2.540 dpi with various exposing hours prices and further information on request

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Used, fully automatic 8up thermal CTP system Kodak Magnus 800 plate setter. Includes 5 MCU cassettes, UDR-C, and Glunz & Jensen MK III unloading and stacking unit. Year of manufacture: 2018. Prinergy TIFF Shooter on Dell Optiplex 3050 Intel Core i3. Prinergy Evo version 8.1 on Dell T-310 workstations. Plate size max: 950 x 1163 mm. Plate size min: 330 x 305 mm. Speed: F 28 plates/h. Standard resolution: 2400 / 1200 dpi. 1 pair Heidelberg Autoplate punches 425 mm. 1 pair Manroland Autoplate punches 780 mm. Kodpeytp Txofx Afwona

Condition: excellent (used), Year of construction: 2022, operating hours: 3,752 h, functionality: fully functional, Magnus 800 Plates 91251 Bacher die-cutter Knedpfxoyarfwe Afwoa TFT PC

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Kedpfx Afjxf Uxcjwsna

Condition: good (used), Year of construction: 2011, functionality: fully functional, SCREEN/FUJI/AGFA MA-L8800II AUTOLOADER (no CTP) Kedpfxoyuyglj Afwena first installed 2011 to use with SCREEN PT-R 8XXX & OEM CTP-Imagesetter 3 plate cassettes with100 plates/each incl. Grafoteam MDT48 conveyor All offers are subject to prior sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Screen PT-R4600 E/ Avalon N4-30 E S/N 462xxx, Kodpfx Ajxlf Rvjfwjna 16 Fiber coupled ciodes, Plate count 10.792 Exposure time 1.045h Screen Blackbox Network Interface EP-B101 RIP on request. All offers subject to prior sale

Condition: good (used), Year of construction: 2007, Screen PT-R16000II, year 2007 Manual plate loading Internal plate cutter Laser head with GLV technology Plate format: 1470 mm x 1165 mm Ksdpfxjzhm Aro Afwena Up to 16 plates/hour in full format 199,000 exposed plates Online L bridge to G & J Quartz III 125 plate developer AGFA ST 125 SX plate stacker Screen EP-B101 network interface Eqious RIP/Workflow All offers are valid subject to prior sale.

Condition: excellent (used), Year of construction: 2011, Plate trolley for SCL (100 plates) - Screen 4000x - Agfa - Fuji Kodpfjy Rh Rlex Afwsna

Condition: refurbished (used), Year of construction: 2000, AGFA Phoenix 2250 with Online Developer in great condition. Resolution: 1200, 1800, 2400 and 3000 dpi - max. image area: 570 × 736 mm - including Techkon Densitometer for film. Ksdpfxjfl Sxqo Afwena Refurbished 2024 in Germany.

Condition: good (used), Year of construction: 2000, AGFA Avantra 44 short OLP in great condition with Rip. You can choose as Rip: AGFA PDF-Rip or HQ-Rip. Resolution: 1200, 1800, 2400 and 3600 dpi - always serviced by Agfa, Kodsc N Ahxjpfx Afwsna Complete System installed 2000.. - Avantra 44 with 1200, 1800, 2400 and 3600 dpi - max. image area: 90,6 x 113 cm - AgfaLine 44 - short Online Processor - Agfa PDF-Rip or Harlequin-Rip System with Service-contract - complete tested and cleaned. Refurbished 2024

Condition: good (used), AGFA AccuSet 800 in great condition with AGFA AGFA Viper 3.0x PostScript Rip, Resolution: 1200, 1800 and 2400 dpi - max. image area: 34 x 200 cm, the Imagesetter was always under Service-contract by Agfa. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photos. Refurbished 2024 in Germany. Knodpjbr Ahtjfx Afwea

Condition: excellent (used), Year of construction: 2014, Agfa Azura 125 CX Washout Station - Very good condition Knjdpfx Aswi Ilaefwja