Used Mechanical Lathe for sale (10,826)

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle Isdex Hp Iwopfx Ag Usic 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, Hand revolver lathe: GDW Type/Model: RD 250 Condition: Used Center height: 125 mm Distance spindle nose – revolver head max.: 400 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: 128 mm Spindle head DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MK 5 Collet bore: 26 mm Continuously variable up to: 60-3,000 rpm Frequency-controlled AC motor 100% ED, 70 Hz: 4.6 kW Revolver slide travel: 100 mm Cross slide travel: 90 mm Revolver tool holder: 6 x 3/4" Length x Width x Height: approx. 1300 x 700 x 1,400 mm Weight depending on equipment: approx. 520 kg Connected power: 9 kW Equipment: -Vibration-damped direct drive to the main spindle, continuously variable with magnetic brake for the main spindle and spindle stop in case of emergency stop -6-position inclined revolver slide with Ø ¾" tool holders Iedpfx Agszcb Rue Ueic -Continuously variable feed rate adjustment -For revolver slide with feed drive -Collet chuck (pneumatically operated) -Extensive collet set -Emergency stop button -Coolant system -Spindle guard

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg Iiodpfxszd Urms Ag Uoc

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Iiodpfxezczbys Ag Uec Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered.

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Iedpfxezc I A Rs Ag Usic Multifix A head Collets

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Iiedpfx Aou Axzkjg Uec Weight of all 4 jaws 146 kg Good condition

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Ijdpfxoy Dvf Rj Ag Usic Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: excellent (used), functionality: fully functional, spindle bore: 652 mm, Pinacho L1 lathe, model 225 x 1600mm swing, maximum diameter over bed 450mm, over cross slide 690mm, over compound slide 215mm, spindle bore 52mm, 18 speeds 32-1800 rpm, 5.5 hp motor, with steady rest, with quick-change tool post, with various accessories, lathe in good condition. Iiedpfx Ajzbzzwjg Uoc

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Iedpeyg Rfisfx Ag Ueic Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Iedpfx Agsyah Rvs Ujic Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Iijdpfsyr R Dcex Ag Uec Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: used, functionality: fully functional, very good condition Iiedpfx Ajymnkvjg Uec

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Isdpfxjw Iq Ums Ag Uoic Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder Iodpfx Agoyh Ndws Uoic

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Iisdpfx Agoykca He Uec Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: used, functionality: fully functional, Engine lathe, manufacturer WEILER Technical data: Distance between centers approx. 500 mm Center height above bed: 125 mm Infinitely variable spindle speeds: Range 1: from 160 – 900 rpm Range 2: from 320 – 1800 rpm Iodpjyzrnpofx Ag Usic

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm Ijdpfov Aa Twox Ag Uoic  Rewinding max. 450mm  Touch screen  Flexo Unit Corona  Webedge Control  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination  GM SmartCrush _____

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest Iisdpfx Agew Dvv Ao Uoc - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: good (used), Used Pinacho L1-260 lathe Distance between points: 1625 mm Max. turning on bed: 520 mm Length of neckline: 350 mm Tilting on longitudinal carriage: 470 mm Turning on the transversal carriage: 320 mm Swing in dive: 770 mm Isdpfx Aeudw Iiog Ujic Reed pitch: 68 mm Main engine power: 7.5 hp *It will be delivered with 3-jaw chuck. *Price can be requested with or without CE regulations.

Condition: excellent (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Turning length: 2800mm Iisdpfx Asy Iai Uog Uoc Workpiece weight: 5000kg

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Iodezfguiopfx Ag Ujic Travelling steady Fully Serviced And Ready For Production

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Iisdpfx Asy Shyijg Uoc

Condition: like new (used), Year of construction: 2024, Twin lane linear weigher. All stainless steel. Iiodpsx Hgb Ijfx Ag Uec

Condition: good (used), Toolholders bought in company where used for Biglia machine Iiodpfx Asyuyhijg Usc

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 Iijdpfx Asx I A Hcjg Uec • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.