Used Index Ms for sale (131)

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min Tedjvh Naqspfx Anlob max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: good (used), Year of construction: 2014, See documents. List of individual machines with operating hours, etc. – see documents. Tedpfx Anezqtg Ajlob

Condition: good (used), Year of construction: 1990, Index MS 25 E (3 pieces per package) Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagon material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control system: INDEX Tsdezvpt Nopfx Anljb Total power consumption: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-tool turret - Thread cutting device - Hydraulic part removal device - Workpiece conveyor belt - Bar feeder magazine

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Tsdpfx Aozlqavenlsb

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Inspection while the machines are powered on is possible. Tsdozicxljpfx Anleb

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Todpfxev Raato Anleb Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015) Todpeyx Tzrofx Anlob

Condition: ready for operation (used), Year of construction: 2015, operating hours: 34,044 h, functionality: fully functional, machine/vehicle number: 270240, number of spindles: 6, bar diameter (max.): 22 mm, bar length: 3,000 mm, spindle diameter: 40 mm, TECHNICAL DETAILS Number of spindles: 6 Spindle bore: 40 mm Bar diameter: 22 mm Bar loader length: 4.70 m Bar length: 3.0 m MACHINE DETAILS Rated voltage: 400 V Rated power: 60 kW Connected load: 71 kVA Maximum fuse: 125 A Line voltage: 400 V Electrical frequency: 50 Hz Control voltage: 24 V DC On-time: 50,134 h Tedpfx Ajw T Rygsnleb Hydraulics on: 43,972 h Running time: 38,809 h Production: 34,044 h EQUIPMENT - Complete replacement of the energy supply for all 6 main spindles in April 2025 - Single-NCU without PCU - Bar feeder Iemca SIR MS22 P 33 (year of manufacture 2015)

Condition: used, Year of construction: 2005, In the configuration 1.2-2.1 axes are X-fix Z-NC and all other axes are NC controlled Double NCU It has Büschel, Çiller and Knoll units. High pressures 40 Bar SIR25 IEMCA driver available Tsdpfjld Npysx Anleb It is in working condition, our workbench can be seen in our Bursa Gemlik factory.

Condition: good (used), Index HBF Hydraulic pump and oil pump Rod loader Tsdjd Tx A Topfx Anleb

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Tjdpfx Anox Tum Sjljb

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Tedpfxezuc T Te Anljb Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 Todpouhantefx Anlob EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC Tsdpfeuhar Esx Anlob - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/38 F - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, Cnc multispindle lathe INDEX MS16C Tsdeztk A Hepfx Anljb

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - maxi feeding length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] EQUIPMENT - sub-spindle - foot and drum Tedpfxouhanae Anljb

Condition: used, TECHNICAL DETAILS - number of spindles : 6 - max. bar diameter : 18 [mm] - slide unit 1.1 : X and Z axes controlled by CNC - slide unit 1.2 : Z axis controlled by CNC - slide unit 2.1 : Z axis controlled by CNC Tjdpfeuhan Tox Anljb - slide unit 2.2 : X and Z axes controlled by CNC - slide unit 3.1 : X and Z axes controlled by CNC - slide unit 4.1 : X and Z axes controlled by CNC - slide unit 5.1 : X and Z axes controlled by CNC - slide unit 6.1 : X and Z axes controlled by CNC - slide unit 6.3 EQUIPMENT - CNC SIEMENS 840D - Counter spindle - Bar loader IEMCA SIR MS18/33 P - Coolant tank KNOLL * with high-pressure pump - Chip conveyor KNOLL - Parts catcher - Ejection of workpiece

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC Tsdouhatpopfx Anljb - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, Cnc multispindle lathe INDEX MS32C Tjdpfx Aoxt U Hpjnljb

Condition: used, Cnc multispindle lathe INDEX MS32C Tsdsxma Npjpfx Anljb

Condition: used, Cnc multispindle lathe INDEX MS42C Tjdpfoxpi Iaex Anlob

Condition: used, Cnc multispindle lathe INDEX MS32C Tedpfx Aszpznlenljb

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - feeding maxi length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] Tjdpfxouham As Anlsb EQUIPMENT - sub-spindle - counter operation device - 5 drilling units - all the tool holders - foot and drum

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 32 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : fixed X axis, Z axis controlled by CNC - slide unity 2.1 : fixed X axis, Z axis controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : fixed X axis, Z axis controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : fixed X axis, Z axis controlled by CNC - slide unity 5.1 : fixed X axis,Z axis controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - counter-spindle in position 6.1 EQUIPMENT - INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU Tedpfx Ansuhangolsb - IEMCA SIR 32/33/P bar loader - Coolant tank with HP pump - KNOLL chips conveyor - RIEDEL cooling unit - Parts catcher with conveyor in position 6.1 - Cross rilling device in position 3.1 et 4.1

Condition: used, Cnc multispindle lathe INDEX MS32C Tedpfjuhaqbjx Anlob