Used Industrial Paternoster for sale (25,550)

Condition: new, functionality: fully functional, Single-board computer, VerB, CPCI 486VGA, SSC 486VGA Model: CPCI486VGA Type: SSC486VGA Condition: New Accessories: Product status report CPU setup Kfedpfxjwid Sco Ah Uoa PSC-486VGA CPU card Manual

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Kfedpfx Ahsu Ul A Nj Uoa Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: used, The industrial suction fan is in working position. Kfedpfxogri I Ro Ah Uja

Condition: used, Year of construction: 2002, machine/vehicle number: 910060/0001, conveyor dryer plant Factory consists of: Conveyor dryer: Kjdpfxovt Rmve Ah Uefa • Feed conveyor (2019) • Three horizontal chain driven conveyor levels made of 5 sections (2002); • 5 heat exchangers (2002); • 5 fans (each is 80kW) (2002); • Cartridge filter for poisonous particles (2002), filters are cleaned; • Biomass separator (2019); • electronics; Fit to dry wood chips, corn biomass, hemp biomass. lucerne and similar. Manufactured in Germany

Condition: new, Year of construction: 2025, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Kfsdpoha Eh Hofx Ah Uoa Ideal for those who value reliable performance and top value for money!

Condition: used, Year of construction: 2000, Flexographic Printing Machine – Newlong (Japan) Industrial equipment manufactured in 2000, designed for flexographic printing on paper for bag production. Enables printing of logos, texts, and graphics directly onto material, ensuring consistent quality, industrial working speed, and high reliability. Ideal for manufacturers of custom paper bags and sacks used in food and commercial packaging. Kfodpfx Aexcxrheh Usa

Condition: excellent (used), functionality: fully functional, Number of Straightening rolls: 7 plate width: 1665 mm plate thickness: 4 - 20 mm Kedpowlg I Esfx Ah Uofa diameter of upper rolls: 4 x Ø 190 mm diameter of lower rolls: 3 x Ø 190 mm bending speed: 4 - 20 m/min weight of the machine ca: 11t dimensions of the machine ca.: 3,2 x 1,7 x 2,2 m We refurbished the machine three years ago.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Kedsv S Dk Sjpfx Ah Ujfa Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: refurbished (used), functionality: fully functional, The Mado Industrial Bandsaw Model: Selekta2 is a robust and reliable cutting machine designed for high-precision, heavy-duty processing of large pieces of meat (with or without bone), poultry, and fish. Performance & Precision Large Cutting Capacity: Offers a Max. Cutting Height of 340 mm, allowing it to handle large blocks of frozen or fresh product. Generous Working Area: Features a large Working Table surface of 680 x 680 mm, providing ample space for maneuvering large cuts. High-Speed Cutting: Utilizes a precise bandsaw blade for fast, clean, and accurate cuts. Operational Benefits Industrial Construction: Built on a sturdy, stainless steel frame, ensuring stability, durability, and resistance to corrosion in demanding environments. Kfjdpsxxn Iksfx Ah Uea Maneuverable Design: The machine is fitted with wheels, making it easy to move for positioning or for cleaning the work area. Hygienic and Accessible: The stainless steel material and open design (as pictured) are built for easy washdown and adherence to hygiene standards. Compact Dimensions: Has Dimensions of 850 x 800 x 1700 mm (L x W x H), offering a powerful tool in a manageable footprint.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust. Kfsdpfsv S Dihex Ah Uja

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Kfodpfjv Sa I Tsx Ah Uoa Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. Kjdsff Huwepfx Ah Uefa As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, product height (max.): 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Kfjdpfjxc E Dqsx Ah Uea Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting traverse load capacity: 3,000 kg MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Condition: ready for operation (used), ABB IRB 6640-130/3.2 – Heavy Duty Long-Reach Robot Kedpfx Ahsx Ea S Ie Uofa The IRB 6640-130/3.2 combines extended reach with industrial-grade reliability, delivering 130 kg payload capacity and a 3.2 m working reach for demanding automation tasks. A proven solution for manufacturing environments requiring large work envelopes, precision, and uptime efficiency. Key Features: • Payload capacity: 130 kg • Horizontal reach: 3.2 m • High precision & repeatability • 6-axis articulated design • Perfect for material handling, machine loading, large-scale automation

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 25 kg, load capacity: 5 kg, arm reach: 900 mm, pivoting range: 360 °, controller manufacturer: dobot, controller model: cc162, teach pendant manufacturer: N/A, teach pendant model: N/A, control cabinet width: 160 mm, control cabinet height: 402 mm, input voltage: 240 V, type of input current: AC, repeat accuracy: 0.02 mm, Equipment: documentation/manual, For Sale: Brand New DOBOT CR5 Collaborative Robot (2022) with CC162 Control Cabinet – Unopened, Pristine Condition Unlock automation with precision and safety using the DOBOT CR5, a high-performance 6-axis collaborative robotic arm, perfect for industrial automation, education, R&D, or light manufacturing tasks. This unit is brand new, factory-sealed, and has never been opened or powered on. It includes the CC162 control cabinet, the standard DOBOT industrial-grade controller, ensuring seamless operation and integration. 📦 Package Includes: DOBOT CR5 Cobot (2022 Model) CC162 Industrial Control Cabinet Original packaging (sealed) Full documentation & accessories as provided by the manufacturer ✅ Key Features: 6-axis collaborative robot with 5 kg payload ±360° rotation on most joints for superior flexibility High repeatability (±0.02 mm) for precision tasks Plug-and-play setup with intuitive programming Safe for human–robot collaboration (ISO certified) Ideal for pick & place, gluing, assembly, inspection, and more Condition: Kfjdewzzl Depfx Ah Usa Brand new Never used or opened Stored securely in original packaging

Condition: good (used), Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel Ksdpfxjtrzp Ee Ah Uefa -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 3 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Condition: ready for operation (used), T-POLE T-POD-121 Industrial Monitor 12.1" , serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Kfsdpfx Ahexah Tcj Usa

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M-6iB R-J3iB, load capacity: 6 kg, arm reach: 1,373 mm, controller manufacturer: Fanuc, controller model: R-J3iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a detailed 77-Point Protocol evaluation carried out by our in-house robotics engineers. Brand: FANUC Kfjdpfx Ahjx Hip Ij Uea Model: M-6iB Controller: R-J3iB General purpose: Small robot, countless applications, and working environments. Payload: 6 kg Reach: 1373 mm Robot weight: 138 kg Delivery time: To be agreed upon mutually IRS Robotics® Refurbishment: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About us: Our core business is supplying refurbished A-Brand robots: ABB – KUKA – YASKAWA. Established 2002. Worldwide shipping.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, FIBIR FED 35 – Industrial Tumble Dryer in Excellent Condition Kjdpfx Ahexqh Afs Ujfa For sale: High-quality industrial tumble dryer, model FED 35 from FIBIR – ideal for laundries, hotels, nursing homes, or service providers. 🔧 Technical Specifications & Highlights Manufacturer: FIBIR (Italy) – FED Series Model: FED 35 – Capacity approx. 35 kg Construction: Drum in stainless steel (AISI 304) Drive: Belt drive system Operation: Front control panel, simple and user-friendly Filter: Large, front-mounted, easily accessible stainless steel filter – ensures optimal airflow and reduces maintenance effort Year/Build: 2023 Condition: "Very good used", fully functional Location: 26810 Westoverledingen Used machinery ✅ Why choose this dryer? High capacity for large laundry loads – perfect for heavy-duty drying requirements Professional quality (stainless steel, robust drive system) – durable and easy to maintain Ready for immediate use – no general overhaul needed with good maintenance Good condition and proven model – a reliable investment ℹ️ Additional Information & Notes The sale is for a used item, price and terms by agreement Inspection possible by appointment – see for yourself on site Pickup or optional transport arrangement available Proper invoicing provided. Feel free to contact me with any questions, requests for more images, or to receive a short demonstration video. _____ Industrial dryer with stainless steel drum • Belt drive system • Controls located at the front, easy to operate • AISI 304 stainless steel filter easily accessible from the front; its large size ensures optimal air circulation and minimal maintenance 35 kg Operational, ready-to-use machines Listing and price refer to one machine // 2 units available

Condition: good (used), Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W Kfjdpfxox I A Dhe Ah Usa -Dimensions: 700/600/H1070 mm -Weight: 30 kg

Condition: ready for operation (used), T-POLE T-POD-121 Industrial Monitor 12.1" , serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Kfjdpjxah S Sefx Ah Uea

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: M-710iC/45M R-30iB, load capacity: 45 kg, arm reach: 2,606 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-710iC/45M Controller: R-30iB General purpose: wide motion multi-purpose robot known for its agility and large work envelope. Payload: 45 kg Reach: 2606 mm Robot mass: 570 kg Delivery time: By mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) Ksdpox Hindjfx Ah Usfa About: Our daily business is the supply of refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Est. 2002. We ship worldwide.

Condition: good (used), Year of construction: 2006, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums -Connection: 220 volts -Stainless steel container (not a wet vacuum cleaner) Kfodpfeh Db E Hjx Ah Uea -Power: 1400 watts -Weight: 25 kg

Condition: good (used), Year of construction: 2021, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm Kodpfx Aex E Riysh Usfa -Weight: 10 kg

Condition: good (used), Year of construction: 2013, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, wet-dry vacuum cleaners, liquid and chip vacuum cleaners, water vacuum cleaners, wet vacuum cleaners -Manufacturer: Numatic, industrial vacuum cleaner type WVD 900-2 Kfodpfxsiaqmfo Ah Uja -Connection: 230 volts -Power: 2400 W -Number: 1x industrial vacuum cleaners available -Dimensions: 740/485/H880 mm -Weight: 23 kg