Used Fireplace Template Fbu for sale (139)

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg Lsdjdvgxijpfx Ah Uota with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, Machine with 30 nail feeders in three nail boxes. Freely programmable nail release and stop position, as well as nail release monitoring for 30 nail feeders. Quick hammer box adjustment with various hammer boxes. Usable template length max. 3200 mm. Includes nail filling platform, control cabinet, control console, and ifm SPS Ecomat 100. Ltsdpfx Ahexl D D Uo Usa

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Ltodpfx Ahex Hv U Re Usa Power: 11 kW

Condition: used, The Eigenbau (Self-build) Perfect binder with PUR is a specialized binding machine designed for precise and efficient bookbinding. This machine is manufactured by Eigenbau and features a perfect binding mechanism with PUR (Polyurethane Reactive) adhesive, ensuring durable and high-quality binding. The machine has a format of 100 mm and is currently available in stock. It is located in Germany, and the price is available upon request. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. Key features of the Eigenbau Perfect binder include a centering function for accurate alignment, a heating roller for optimal adhesive application, and a miniature circular saw for precise cutting. Additionally, it comes with a paper unwinding mechanism and a PLC (Programmable Logic Controller) for automated control. There is also an optional INATEC BS 25002 PUR system available for an additional 1500 EUR, which can enhance the binding process. The machine is equipped with an input station that includes a plate lifting station for efficient material handling. Format: 100 mm Equipment: Centering function Heating roller Mini circular saw Paper unwinding SPS control Optional INATEC BS 25002 PUR ( 1500 EUR extra) Ltjdpsvfx Rtofx Ah Uoa input station with plate lifting station

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control Ltsdpfewx Dcysx Ah Uoa * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: excellent (used), Year of construction: 2023, S3Y310 BAND FILTER SYSTEM INCLUDING CHIP CONVEYOR BMF-BÜRENER - Coolant tank: 600 litres - Dimensions (LxWxH): 1100x1100x800 mm - Filtration capacity: 150 l/min with emulsion - Average outlet fineness: approx. 60-40 µm - 2x screw spindle pumps MTS20-40 Delivery pressure: 25 bar Flow rate: approx. 24 l/min Ltjdpfx Ahoxv Dbhs Uja Power: 3 kW - 2x submersible pumps SPK2-23/15 (rinsing) Delivery pressure: 4.3 bar Flow rate: approx. 35 l/min Power: 0.75 kW - 1 roll of filter paper - 1 unit hinged belt chip conveyor with pre-filtration, lifting tank and lifting pump (Flow rate approx. 170 l/min) - Coating: Graphite grey RAL7024 Year of manufacture: 2023

Condition: new, functionality: fully functional, Structuring / Sanding Brush Set Manufacturer: Ehrholz Compatible with Makita 9741 brush sander Surplus package with assorted grits. The items are new, only the outer packaging is missing. Includes: Ltsdpfx Ahow Eybxe Usa 11 pieces grit 60 10 pieces grit 80 3 pieces grit 100

Condition: new, axle configuration: 2 axles, Paving stock sorting cart with templates for mechanical paving clamp. Lodsx I Eniopfx Ah Uota State: New

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF Ltedpfx Ahou R S Els Uea with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Ltsdpfxsx Dddxj Ah Usa Terms of delivery: ex location

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Technical specifications: X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Ledpswal Dhefx Ah Ueta Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Ljdpfx Ahoxzg Ube Ueta Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Year of construction: 2007, condition: used, Year of manufacture: Dec 2007 New: No Serial number: see template. 3 used Terminal tractors for spare parts , Terberg 282 and 283 from 2007 and 2012. only missing small parts. Lodpfx Ahjx An Dgo Ujta

Condition: good (used), Standard equipment - Basic device profile projector Mitutoyo PJ 3000 - Ground glass D 300 mm with clamp for fastening of a radius template Ltjdpfxjp H Ta Do Ah Uoa - Objective 10x and reflected light mirror - Measuring table with travel ... a) MT X 100x Y 50 mm or 150x50 mm with glass plate - Illumination device for transmitted and reflected light (24V/150W) - Calibration protocol I Instructions D Delivery I Instruction I Factory and Daaks calibration possible

Condition: used, Grinding wheel diameter max.: 225 mm grinding wheel diameter max.: 225 mm Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Tool width max.: 230 mm tool width max.: 230 mm Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. * Incl. new coolant pump. Lodjlf H Tgjpfx Ah Uota

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Ltsdevta Rkopfx Ah Uea Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA18031207013284, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, table length: 840 mm, main saw diameter: 450 mm, power: 7.5 kW (10.20 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0399 F45 Pro Drive Year of manufacture: 2018 Template holder Ledpfxow Nii Se Ah Usta Max. saw blade diameter: 450 mm Motor: 7.5 kW Vario DRW: 3000 mm TPL: 840 mm WGA Digit-L PA 1300 mm CNC Front support roller Air cushion table

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES This unit does not come with the Ion Torrent OneTouch ES Ledpfsxzg T Rex Ah Usta Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC 50/60Hz 0.5 Amp

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware Ltodpfx Ajx Emgush Uea BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: good (used), Code: 0327 Brand: SCM Lsdpsx Ig S Aofx Ah Ujta Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Weight kg 680 MACHINE NOT RECONDITIONED , SEEN AND LIKED UNDER THE CONDITION IN WHICH IT IS FOUND , WITHOUT ANY WARRANTY

Condition: used, Manual planer knife sharpener Weinig Rondamat 931 for sharpening and grinding profile knives and straight planer knives in the planer head using templates. Max. tool width: about 230 mm Lsdew Au Rcepfx Ah Uota Grinding speed: infinitely adjustable Mandrel: 30 / 35 / 40 / 50 / 60 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Ltedpfx Aevta Sboh Uea Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) Ltedpfx Ahew Titlo Uea - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Efficiency and flexibility Ltodpfsxzg T Dex Ah Uea The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, This listing is for a Mast Uri Well. The unit is in full working condition and is ready for immediate release. The Mast Uri Well is a cutting-edge dispensing aid that features a 96 LED template, specifically designed for the streamlined transfer of urine samples in the diagnostic process for urinary tract infections (UTIs). Key Features: 96-Well Template: The innovative design allows for efficient sample transfer across 96 wells simultaneously, facilitating bacterial identification and antibiotic susceptibility testing (AST). Semi-Automated Solution: Integrates seamlessly into the Mast Uri System, combining manual and automated processes for optimal laboratory performance. Benefits: Increased Efficiency: Automating the sample transfer minimizes manual handling, decreasing the time spent on sample preparation and allowing lab technicians to focus on other critical tasks. Improved Accuracy: The precise placement provided by the 96-well template minimizes risks of contamination and mis-identification of samples, ensuring reliable results crucial for patient outcomes. Enhanced Throughput: The streamlined workflow enables laboratories to process a higher volume of samples in shorter turnaround times, essential for timely diagnosis and treatment of UTIs. Cost Savings: By reducing the need for manual handling and minimizing waste through efficient sample management, the Mast Uri Well contributes to overall cost reductions in laboratory operations. Ltodpfoxxy S Isx Ah Uea