Used Infeed for sale (2,034)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Iedpezp H R Ejfx Abpjif Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: like new (used), The Supfina 200 superfinishing device is an attachment for processing cylindrical shafts using stone finishing techniques. It is suitable for machining pre-ground or finely turned surfaces. The device performs an oscillating motion; workpiece infeed is realized via a pneumatic cylinder or via the lathe’s support. Its easy mounting on a lathe makes the Supfina 200 superfinishing device particularly suited for repair operations, single-part production, and small batch manufacturing. The device is very robust, making it well-suited for continuous and multi-shift operation. The oscillation stroke, infinitely adjustable between 0 and 5 mm, remains almost constant even under load. This allows grooving operations between shoulders to be carried out cleanly and without overlapping stroke, even with narrow reliefs (less than 1 mm). For economical machining, diameters from 1 to 300 mm are recommended for short workpieces. Iiedszuv I Dopfx Abpsf

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Iijdpfx Aszuvy Hobpef Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Extra 15 package of sanding paper included( brand new )

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Iijdpfx Aozughzsbpef Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: used, Year of construction: 2011, max. workpiece length 4100 mm profile spindle 8 Stück main drive 16 kW Control SIEMENS Working Process Wooden Window Production Line ----- Sale on behalf of the client; ex-site. System can be viewed while still in operation! System comprising: Item 1: Infeed conveyor following the planer (planer NOT included) Iijdpezughuefx Abpef Item 2: Working Process Sapiens, Year of Mfg. 2011 (end-grain milling and drilling) - Spindle 1: 10 kW, HSK-E63, A/C-axis - Spindle 2: 10 kW, HSK-E63, A/C-axis - Spindle 3: 16 kW, HSK-E63, C-axis - Spindle 4: 16 kW, HSK-E63, C-axis Item 3: Transport system to LOGOS SCH Item 4: Working Process LOGOS SCH, Year of Mfg. 2008 (end-grain and longitudinal milling and drilling) - Spindle 1: 16 kW, HSK-E63 - Spindle 2: 16 kW, HSK-E63, C-axis - Spindle 3: 10 kW, HSK-E63, C-axis, A-axis - Spindle 4: 3 kW, fixed configuration, for 2 tools (e.g., for weather-seal grooves, wood-aluminum clip slots, etc.) - Central pick-up tool changer with 95 tool positions Item 5: Outfeed conveyor Detailed descriptions and layout available upon request! (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 Connect machining center - used - Year of manufacture: 2022 Integrated vacuum pump Continuous processing 4-sided edge profiling possible Automatic vacuum cup positioning Hardened, dust-protected prism guides Ball screw spindles on all axes Network card for remote maintenance Iijdpfx Abszr Inqopsf Integrated control cabinet Control cabinet cooling with heat exchanger Handheld control unit Pick-up tool changer Changer for angle head Central lubrication, automatic Sensor for panel measurement Barcode scanner CLAMEX tools Angle gear for CLAMEX Additional infeed table ----- Technical data ----- Machining length (edge profiling - radius) X: 3,200 mm Machining length (edge profiling - radius) Y: 985 mm Min. workpiece length X: 200 mm Min. workpiece length Y: 70 mm Min. workpiece thickness: 8 mm Max. workpiece length X: 3,200 mm (longer with extension) Max. workpiece length Y: 1,200 mm (max. passage width) Max. workpiece thickness: 70 mm Main spindle motor power: 10.3 kW (S6) Main spindle speed: 1,000 - 24,000 rpm Main spindle mount: HSK-F63 Drilling unit motor power: 1.7 kW Drilling spindle mount: M10, interference fit 11 mm Number of vertical drilling spindles: 13 pcs Number of horizontal double drilling spindles in X-direction: 2 pcs Number of horizontal double drilling spindles in Y-direction: 1 pc Saw blade Ø of saw unit: x 20 x 5 mm Number of tools in the changer: 6 + 1 pcs Dust extraction port Ø: mm Compressed air connection: 6-8 bar Compressed air requirement: 200 NL/min Quality information: - Complete basic cleaning - Electrical system checked - Pneumatics checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. Iisdpfx Asu Dw I Esbpef CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Iodpfjulpu Sex Abpjif Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: used, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/h Broschürenfertigung / Booklet Maker SPF-11 - FC-11 Baujahr / Year 1998 - Serial-No. 128032 Iedpfozu Dm Uox Abpoif Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Digitaldrucker mit FS-612 Broschürenfinisher / Digital Printing Press with Broschure Finishing System Iodpfxjzuyltj Abpeif Digitaldrucker / Digital Printing Press Konica Minolta Bizhub PRO C1060L Baujahr / Year 2016 - SN. A5VM021003546 Total Counter 137.408 Sheets, Duplex 33.008 Auflösung / Resolution 1.200 x 1.200 dpi x 8 bit Papiergrammatur / Paper grammage 62–300 g/m² Autom. Schön- und Widerdruck / automatic Perfection 62–300 g/m² Papierformate / Paper Sizes 330 x 487mm Maximaler Druckbereich / max. Print Area 323 x 480mm Papiereingabekapazität / Paper Infeed Capacity Standard 1.500 Bögen -  max. 4.250 Bögen Papierausgabekapazität /  Paper Infeed Capacity Broschürenfinisher FS-612 max. 2.500 Bögen Heftfinisher FS-531 max. 3.000Bögen Ausgabefach OT-502: max. 15 Bögen Abmessungen des Basissystems 760 x 903 x 1.072mm Gewicht des Basissystems 291kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system service or installation (software) provided. Advantages: Iodpfx Aboxtfa Hspoif • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: used, Year of construction: 2017, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 32 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, PLASMA CUTTING) | YEAR 2017 The Ficep Tipo G25LG is a CNC-controlled plate processing line for drilling, milling, marking and plasma cutting of steel plates in a single pass - without re-clamping. This significantly reduces throughput times in the production of gusset plates, end plates and connection components. CONDITION Used - technically sound. The line is currently in productive operation. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The G25LG combines a vertical mono drilling unit with automatic tool changer (ISO 40) and an integrated plasma cutting unit in a rigid twin-bridge gantry frame - all processes in a single pass according to the NC program. The Ficep Pegaso CNC transfers part data and hole patterns directly from CAD without manual rework. Typical applications: structural steelwork, steel trading and plant construction. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2017 | Serial number: 35446 - Machine type: CNC plate processing line (drilling / milling / plasma cutting) - Condition: used, technically sound - Plate width: max. approx. 2540 mm, min. 200 mm | Max. plate length: 6000 mm - Plate thickness: max. 100 mm (drilling), max. 45 mm (plasma), min. approx. 6 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Tool positions (ATC): 24 - Drilling diameter: max. 32 mm, min. approx. 10 mm | Max. drilling/milling depth: 100 mm Ijdou Dxbtepfx Abpoif - Max. spindle speed: 7000 rpm | Spindle power: 15 kW - Plasma source: Hypertherm HPR 400 | Plasma current: 400 A - Straight plasma cutting and bevel plasma cutting - Max. longitudinal travel speed: approx. 30 m/min | Cross positioning: approx. 4.6 m/min - Pass line height: approx. 850 mm - CNC control: Ficep Pegaso, direct NC data input with CAD interface - Frame concept: welded twin-bridge gantry frame | Machine weight: 8000 kg - Processes: drilling, milling (straight/curved slots, countersinking, Y/J weld prep), tapping, centre punching, marking, straight and bevel plasma cutting Values marked "approx." are confirmed during inspection. Overall dimensions and electrical connection on request. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2017) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Bevel plasma cutting torch | 1 x Hypertherm HPR 400 plasma source (400 A) - 1 x Infeed roller conveyor with material transfer (6 m) | 1 x Outfeed roller conveyor (3 m) - 1 x Fume extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2020, functionality: fully functional, product height (max.): 610 mm, Equipment: double-sided, FICEP NOZOMI 601 RAZ - ROBOTIC PLASMA CUTTING SYSTEM FOR STRUCTURAL STEEL | YEAR 2020 The Ficep NOZOMI 601 RAZ is a fully automatic robotic plasma cutting system for three-dimensional thermal processing of steel profiles and beams. An anthropomorphic 9-axis articulated robot machines all four profile faces without re-clamping, replacing layout, thermal cutting, coping and grinding with one automated work cell - less handling, shorter throughput times, reproducible quality from CAD/CAM data. CONDITION Iedpfx Aexq Rpnobpjif Used - technically sound. The machine is currently in productive operation. Year 2020 - a comparatively young machine of its class on the used market. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The NOZOMI 601 RAZ combines plasma cutting, coping, bevel cutting, weld-seam preparation and marking in a single pass. The non-contact laser scanner measures the profile surfaces and determines the torch start position automatically. The system processes H-beams, U-channels, L-angles and flat bar. Typical applications: structural steel, bridge and plant construction, series production of connection and node details. Plasma processing uses the Hypertherm True Hole process. TECHNICAL DATA - Manufacturer: Ficep | Model: NOZOMI 601 RAZ | Year: 2020 | S/N: 36291 - Machine type: Robotic plasma cutting system (thermal profile processing) - Condition: used, technically sound - Profile size min.: 80 x 10 mm - Profile size max.: approx. 610 mm profile height (flange width to be confirmed during inspection) - Profile types: H-beams, U-channels, L-angles, flat bar - Machining sides: 4 | Clamping: automatic - Number of CNC axes: 9 | Design: anthropomorphic articulated-arm robot - Profile measurement: laser scanner, non-contact, fully automatic (multi-surface) - Cutting process: plasma | Plasma cutting heads: 1 - Plasma technology: Hypertherm True Hole - Bevel cutting: 45-degree bevels, copes, weld-seam preparation - Marking function: yes (orientation marks, weld symbols, labelling) - Software: Steel Projects PLM (licence transfer on request), free vector programming, automatic nesting - Infeed length: 16 m | Outfeed length: 16 m - Extraction: integrated particle filter system Machine weight, electrical connection values and max. plasma cutting thickness are confirmed on request. SCOPE OF DELIVERY - 1 x Ficep NOZOMI 601 RAZ robotic thermal cutting system (year 2020) - 1 x anthropomorphic 9-axis articulated-arm robot - 1 x plasma cutting head (Hypertherm True Hole compatible) | 1 x automatic torch changer - 1 x laser-scanner measuring system (non-contact, multi-surface) - 1 x infeed roller conveyor (16 m) | 1 x outfeed roller conveyor (16 m) - 1 x automatic clamping device | 1 x integrated extraction system LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is a specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION Isdpjxn T Smefx Abpjif The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. Iodpfey Tuxzox Abpoif This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edgebanding machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off. Segment width of the pressure beam 35mm Isdpfx Abszqvmrspeif Contact roller pneumatically adjustable, low wear due to corrugated steel roller Grain equalization Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the top part of the machine, thus also integrable in sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and connectors for an optional blower are available. Alternatively, the belt can also be connected to the dust extraction system. Dust extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: belt speed, feed speed, workpiece height, pressure beam insertion points front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual Without the connection cable shown Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank Isdpfx Ajx U Dawjbpsif • Table dresser + diamond • Work light • Tool kit • Operating manuals

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser type: CO₂ laser, laser power: 5,000 W, Equipment: cooling unit, nozzle changer, - Laser power: 5000 watts. - Year of manufacture: 2010 - Thin sheet productivity package - Nozzle changer - Transverse conveyor - Tilting container for transverse conveyor - LiftMaster Store - Extended sorting system (1000 x 600) Iiodpfx Ajzq S Edsbpsf - Extended part removal for parts from 600 x 600 - Integrated sheet alignment - Single-sheet separation - Sliding gate, two-leaf - SortMaster - Rotating unit + extended part removal 1000 x 600, infinitely adjustable - Additional gripper for long parts - Extended magnetic suction system - TruStore 1030 - Infeed/outfeed station with trolley - 10-level compartment, 90 mm + pallet - 5 pallet bases - Column cladding - Storage interface

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 Iisdpfoztmz Sjx Abpsf stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Iijdpeztmvvsfx Abpof Stator knife rows: 2 Drive: 75 kW

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Iisdjzd Uqcjpfx Abpsf Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: used, Year of construction: 2022, Manufacturer: Deighton Model: Econoline 200 Year: 2022 Condition: Used Stock Number: 3405 Deighton forming machine Type: Formatic R2200 / 180 Serial number: R2200/22/10/368 Capacity: max 4400 products per hour Hopper: 20 litres Belt width: 120 mm Power: 230VAC, 1Ph, 50Hz, 0.75kW Dimensions: 1150 x 900 x 1500 mm Weight: 95 kg Deighton flattening conveyor Type: FL Serial number: FL 16/04/036 Belt width: 175 mm Power: 230VAC, 1Ph, 50Hz, 0.18kW Dimensions:1450 x 650 x 1200mm Weight: 48 kg Deighton preduster Type: 200W Econodust M/C Serial number: ED 22/09/068 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.51kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton battering machine Type: 200W weir Econorobe M/C Serial number: WER 22/09/067 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.88kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Iijdpfxoznk Ace Abpef Deighton mixer Type: Batter mixer Serial number: M 22/10/073 Mixer: 200 litres Power: 230VAC, 1Ph, 50Hz, 1.5kW Dimensions: 1400 x 600 x 1250 mm With double jacket for cooling Deighton preduster Type: 200W Econodust M/C Serial number: ED 22/09/069 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.51kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton tempura dipper Type: 200W dip-Econorobe M/C Serial number: ER 22/10/072 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.4kW Dimensions: 1550 x 750 x 1350 mm Weight: 130 kg Deigthon breading machine Type: 200W Econocrumb M/C Serial number: EC 22/09/070 Belt width: 200 mm Power: 3 x 400V, 50Hz, 1.7kW Dimensions: 1600 x 850 x 1800 mm Weight: 170 kg Deighton fryer Type: Econofry M/C Serial number: EF 22/09/071 Belt width: 200 mm Frying length: 1750 mm Heating: electric Power: 3 x 400V, 50Hz, 23kW Teflon infeed, hold down belt, inline filtration system, storage tank and pump, hoist system

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR AND TEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quote from the authorized service partner for €879.59 net for materials and labor is available. Alternatively, the replacement can be carried out independently. We will provide the repair quote to interested parties upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly from the end user. Iiedoy Stuxopfx Abpjf Fully automatic machine for shrink and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. SPECIFICATIONS - Output up to 3,600 units per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm - Films: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop and safety features CONDITION AND MAINTENANCE Optically in very good condition. Lifetime counter: 36,415 packages, indicating moderate use. In May 2025, the sealing wire, upper and lower rubber seals, and Teflon tape were replaced. Maintenance and repair documentation is available. Due to the aforementioned conveyor belt, the handover will be in the described as-is condition; inspection and functional testing are expressly desired. SCOPE OF DELIVERY - Machine with glass hood, Magelis touchscreen, safety features, and connection cable - At least one suitable film roll with a width of 600 mm - Possibly another partial roll; the exact inventory will be checked before handover - Machine on four swivel casters - Original documents, including data sheet, order confirmation, and available maintenance and service correspondence LOCATION, TRANSPORT, AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing a suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; the transport costs will be added to the purchase price. PRICE AND SALE - Offer price: €8,360 net plus statutory VAT - Commercial sale by Marko Strehk Einzelunternehmen - Known wear and tear are fully listed above - The machine can be inspected and tested before handover - In the case of an intra-community delivery, the tax requirements and evidence will be checked in advance If you are interested, we will gladly send you the repair quote and the available documents.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Iijdpoh Uyg Nofx Abpof

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer includes an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - Diamond edge trimming cutter set EVOLUTION - CAMPUS V8 EVOLUTION CAD/CAM software Isdpszq Dbdsfx Abpoif - Flat screen monitor, 21.5", 16:9 - Laser workpiece length measurement - Milling head 7830 - Tool changer 7887, 6-position magazine, pick-up - Vacuum system ECO - Air conditioning unit for control cabinet cooling - Tool changer 7874 - Angular gearbox 7869 - Adapter for Clamex cutter - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Handheld control unit - Tool set - EVOLUTION for XL drilling head 7885 - New exhibition machine -