Used Injection 2000 T for sale (76,068)

Condition: ready for operation (used), Fanuc A06B-0215-B700 AC Servo Motor SN:C06ZF0779 + A860-2000-T321 used, in good condition, 100% functional, delivery as per photos. Chodpfex Dt Aqex Ab Dsb

Condition: ready for operation (used), Fanuc A06B-0266-B100 SN: C03XA7281 + Pulsecoder A860-2000 servomotor, used, normal signs of use, 100% fully functional, scope of delivery as shown in the photos. Chjdpfx Abex Dt H As Dob

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5209, the housing has a small dent on the right side, see photo, used, in good condition, 100% functional, delivery as per photos Chedpfsx Eq Hxox Ab Djb

Condition: new, ELWA ETR 96 Type R 2000 - EL21-1 SN: 2474-021, unused in original packaging, 100% functional, scope of delivery as per photos. Chjdoy Rckyopfx Ab Dob

Condition: ready for operation (used), Fanuc Model L50/2000 Motor Spec. A06B-0572-B077 Servo Motor Serial Number: CS72G0835, used, good condition, 100% functional, scope of delivery as per photos Chedpfouhi H Ssx Ab Dob

Condition: ready for operation (used), HOLZ-HER / ELTE PE5.14 / 2 motor spindle SN:27.95 + Heuco PS 2000-E , the interference suppression capacitor is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Chsderrqrrepfx Ab Djb

Condition: new, Fanuc A06B-0269-B400 AC Servo Motor + A860-2000-T301 Pulse Decoder SN: 6250, unused in opened original packaging, 100% functional, scope of delivery as per photos Chsdpfx Abom Nx Nls Djb

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5217, used, in good condition, fully functional, scope of delivery as per photos. Cjdsx Eq H Eopfx Ab Dshb

Condition: new, Fanuc A06B-0216-B200 # 0100 AC servo motor SN: C05XF2945 with A860-2000-T321 pulsecoder SN:, unused, 100% functional, delivery as per photos. Csdpfx Asx Dt Dbsb Dshb

Condition: ready for operation (used), Fanuc A06B-0216-B400 AC servomotor, serial number: C162F1DEE + encoder A860-2000-T301, used, in good condition, 100% functional, scope of delivery as shown in the photos. Csdpfxox Dt Dnj Ab Djhb

Condition: ready for operation (used), Fanuc A06B-0236-B100 AC servo motor SN: C03XD5286 with A860-2000-T301 pulsecoder SN: 161358030924, used, in good condition, fully functional, scope of delivery as per photos. Chjdpfx Aox Dt Elob Dob

Condition: ready for operation (used), Fanuc A06B-0218-B200 AC servo motor SN: C148F2F0D with A860-2000-T301 pulse coder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cjdpfxsy Nn T Re Ab Dohb

Condition: new, Fanuc A06B-0266-B100 AC Servo Motor + A860-2000-T301 SN 8318 Pulse encoder, unused in opened original packaging, 100% functional, scope of delivery as per photos Chedpfx Abem Hq Ayo Deb

Condition: ready for operation (used), Fanuc A06B-0247-B805 servo motor SN C05YA3070 + A860-2000-T301, used, good condition, 100% functional, scope of delivery as per photos Csdpfsq E Dqrjx Ab Dohb

Condition: ready for operation (used), Dittel BM 2000 Balance – Measuring device SN:239-5228, used, in good condition, fully functional, scope of delivery as per photos Csdpfx Ajx Eq Icob Dshb

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, Breadcrumb Crusher Hommel Rotormat 2000 Super Chedpfxey Hwc Aj Ab Djb "the universal crusher" Stainless steel design High-performance Connection: 400V, 16A CEE plug Dimensions: 690 x 650 x 1550 mm (W x D x H) Used machine, cleaned Comes with warranty We have many other machines in stock!

Condition: used, Year of construction: 1972, turning diameter over bed:980 mm turning diameter over slide rest:600 mm turning length:2200 mm turning diameter in the pit:1200 mm lenght of the pit:450 mm turning speeds:24 speeds:8 - 800 U/min Codpfx Abocxxqls Djhb spindle bore:150 mm x-axis:x = 2000, x² = 350 mm y-axis:500 mm thread pitch -number:398 Stück thread pitch:0,5 - 224 mm thread pitch:0,25 - 112 Teil. mod. thread pitch:56 - 1/8 Gang je Zoll thread pitch:112 - 1/4 D.P. feeds::108 feeds - longitudinal:0,032 - 15,2 mm/U feeds - cross:0,016 - 7,6 mm/min quill::MK6 quill stroke:380 mm voltage:380 V frequency:50 Hz total power requirement:25 PS weight of the machine ca.:7,9 t dimensions of the machine ca.:4,4 x 1,8 x 1,7 m

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Codezvz Dtjpfx Ab Dehb Weight: 360 kg Operating principle: hydropneumatic Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Condition: excellent (used), power: 16,000 kW (21,753.92 HP), fuel type: diesel, overall weight: 14,000 kg, Year of construction: 1998, operating hours: 622 h, output voltage: 400 V, nominal power: 1,600 kW (2,175.39 HP), nominal power (apparent): 2,000 kVA, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, We have a used emergency power generator, or grid replacement system, for sale with the following technical specifications: Condition: Used, fully functional, inspected Engine: MTU 16V396 Generator: AvK Rated power: 2000 kVA / 1600 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V Operating hours: approx. 618 hours (emergency power operation) Year of manufacture: 1998 Open design - Includes batteries - Includes diesel tank - Includes circuit breaker - Includes control system (island operation). Chedeug I U Ejpfx Ab Dsb - Optionally, against an additional charge, the control system can also be synchronized for grid-parallel operation with load distribution and emergency power operation. Seamless integration into your energy infrastructure. Optionally, installation in a 30 or 40 ft container is possible, against an additional charge, as a compact, ready-to-use unit. Dimensions: 500x180x230 cm (L x W x H) Weight: 12,500 kg The emergency power generator will be delivered in a ready-to-use condition, including a logged load test of 60 minutes. Delivery, installation and commissioning are possible for an additional charge. Price: 80,000

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar Chjdpfsvh H Dyjx Ab Djb * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Chodpfx Aox U Ay Njb Dob Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW Chedpfszv S Aasx Ab Djb SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, KUKA KR 180 Series 2000 robot with a 3-meter process axis. Max. weight: 180 kg Max. reach: 2700 mm Chedozmtqmepfx Ab Dob Max. payload: 180 kg Dimensions: 2700 mm Number of axes: 7 Year of manufacture: 2001 Scope of delivery: Robot, controller, cables, teach panel, wiring diagram Used – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please provide country, city, and postal code. Freight costs on request – please provide delivery address.

Condition: used, functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-2000-CUT, laser power: 2,000 W, input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: cooling unit, We are offering this used IPG Laser YLS-2000-CUT. Model name: YLS-2000-CUT Serial number: 16126751 Cjdpfxozhcvns Ab Dehb Rated voltage: 400-460 V AC 3P/PE Frequency: 50/60 Hz Rated current at full load: 15.2 A Fuses: 20/120 A/kA Drawing number: G25-16-130212-7 Date of manufacture: December 2016 with the corresponding water chiller: IPG chiller Model LC 71.01-A.4.5/6 Date of manufacture: 2018 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Chjdpfxslwqrte Ab Dsb Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units