Used Vulcanizing presses for sale (5)

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press for versatile use as an assembly press, small series press, manual insertion press or heating press in double column press design (H-press) The press can be inspected at the Ennepetal warehouse. It is a 2.5 year old, unused press without operating hours, which is sold with full warranty. List price: 45.000 € for a special price of 28.000 € Technical details: Robust machine frame Capacity: 30 tons - at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW - 15 hp Oil tank: 600 × 450 × 500 mm - with approx. 100 liters Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Forward speed: 45 mm/s Return speed: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm - with T-slots Plunger plate: 700 × 500 mm - with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Table size of the press table 700 × 500 × 70 mm Table height 800 mm, from hall floor Cylinder dimensions / piston rod 110 / 75 mm Plunger size 700 × 500 × 80 mm Emergency switch Rear protective cladding made of painted mesh Lighting in the press area Closed at the rear and sides 500 mm high light curtain with 14 mm resolution (finger protection) Maximum distance between table top and ram 500 mm Cylinder travel 500 mm Front open width 820 mm Bob Hawbou U Ey Ie Aswl Press pressure adjustable from 5 to 30 T via rotary control Travel speed downwards 50 mm, upwards 40 mm per second Total weight approx. 2000 kg Paintwork in RAL (light gray) 7035 and RAL 2009 (orange) Assembly, commissioning, instruction for a separate charge CE declaration and documentation in German Plunger plate with two guide columns Resettable piece counter Position limitation via cam switch Adjustable two-hand control with 3 m supply cable Safety test with certificate from an authorized company There are movable sensors on the right-hand side to limit the travel distance. These can be used to set a specific travel distance, for example 300 mm. The press then automatically moves up to the preset point at the touch of a button. The ram plate is guided by 2 guide columns. The rear of the press is closed, but equipped with air outlet openings. There is an ejection chute in the table. Light barrier with under-grip protection. Mountable overgrip protection. Optional: 2 heating plates, 500 × 500 mm heating surface, total size 550 × 550 mm, with controller, up to 200 degrees, incl. insulating plate, 20 mm thick, with timer Optional: Commissioning and training Delivery time Currently a delivery time of approx. 2 weeks is to be expected (without heating plates) Heating plate delivery time approx. 4 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Year of construction: 1969, Condition: good (used), Pneumatic gluing press, pressure max. 10 bar, Bwsbsd Dxqbj Hawb Asl gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, drive power: 5 Kw, 380 Volt-50 Hz, two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Condition: refurbished (used), Year of construction: 1999, operating hours: 2,600 h, Functionality: fully functional, total width: 2,200 mm, total length: 1,100 mm, total height: 3,400 mm, overall weight: 17,000 kg, operating pressure: 200 bar, construction height: 3,400 mm, clamping force: 5,500 kN, table length: 850 mm, table width: 1,100 mm, working height: 800 mm, Hydraulic press, generally overhualed hydraulic and electric, 550 T closing pressure, 2 closing speeds: Rapid and working speed Single piston 850*1100 table with T slots Max opening 800 mm Siemens PLC automation with installed Temp. controllers. Possible usage in rubber vulcanization, duroplast pressing, metal forming etc. Bwsb Hawbjuy Rczs Ael

Condition: as good as new (ex-display), Year of construction: 2023, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Bjb Hawjk S Dt Tob Ajwl Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Bobofxyh Rs Hawb Aowl Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?