Used Inserter for sale (1,893)

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) Tedpjq Ec Rgefx Aacsd All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 05/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Tjdpfxexrrb Ie Aacsd Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: like new (used), Year of construction: 2021, Stegherr KSF-mini Cross Bar Milling Machine A video of the machine in operation can be sent upon request. For manufacturing cross bar joints in window or furniture construction. All three machining steps are performed in a single clamping: 1. Milling the upper mitre by moving the milling unit to the rear 2. Sawing the web by swiveling the clamped workpiece 3. Milling the lower mitre by moving the milling unit forward Maximum workpiece cross-section: 56 x 46 mm Pneumatic foot switch for clamping the workpieces Stop ruler with optical reading Milling head with indexable inserts 3 saw blades included Total connected load 400V / 3.3kW (Saw motor 2.2kW, Milling motor 1.1kW) Extraction port: 100 mm Tjdswkvg Ujpfx Aacod Machine in original paint, only used for demonstrations so far. Included in delivery: • On-board tools • Operating manual • CE marking Dimensions approx. 1400 x 700 x 1400 mm (LxWxH). Weight approx. 200 kg. The machine can be demonstrated in our facility by appointment. We only offer machines that are ready for demonstration and available in our warehouse; see "Other offers from this supplier."

Condition: good (used), Year of construction: 1994, spindle drilling machine 1994 (engine new 2015) machine no.: PB04.08.94.261 4 drill heads, can be upgraded to 6 drill diameter: 3mm to 14mm hole spacing: 31.7mm to 293mm hole spacing using the sliding table: 1mm to 420mm located: Germany Insertion depth behind the drills: 25 mm sliding table width: 450 mm Sliding table size in front of the drills 300 mm maximum stacking height: 50 mm Todpfxsvccnke Aacod power requirements: 230/400 volts 3 phases, 50 Hz, 1.87 kWh. space requirement: 770mm (W) x 760mm (D) x 1350mm (H) weight: 275 kg net located: Germany available: immediately

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 192 cm³, injection pressure: 1,700 bar, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, warehouse no.: 503503 manufacturer: ENGEL type: insert 650H-120 controller: CC200 year of construction: 2012 operation hours: 10624 h clamping force: 1200 kN size of mould plates h x v: 710 x 400 mm min. mould height: 400 mm max. open daylight: 750 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 192 ccm injection pressure: 1700 bar equipment included: Tedpfxoxtcv Ss Aaced screen text german screen text english air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts clamp unit vertikal interface for dosing unit mould heating 8x measures of machine l x w x h: 4.2m x 2m x 3.6m total weight: 12500KG

Condition: used, functionality: fully functional, In this offer, you are purchasing a used large-capacity "Plockmatic HCI3500" insertion unit Object of sale: 1 x Plockmatic HCI3500 Suitable for the following Ricoh Pro models: 82xx series 83xx Series C72xx Series C92xx series C7500 C9500 Meter readings: Total: Approx. 116,898 pages Tsdpfxorpzpro Aaced Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Year of construction: 2007, condition: refurbished (used), We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB300 - 10K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. Tedpfok D Hb Ijx Aacjd More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also availabl optional. Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Year of construction: 2018, condition: used, The SBZ 628 series offers maximum flexibility in the machining and cutting of aluminum profiles. It is used in both metal construction and industry. Advantages such as production reliability, speed, and cost-effectiveness, as well as its impressive versatility, make this flexible profile machining center a perfect all-rounder. Up to eight milling units, freely positionable on the profile cross-section, combined with innovations such as the combination clamping system, travel clamp, and swiveling gripper, allow for the fully automated machining of a wide variety of profile types, for example, for windows, doors, and facades. SBZ 628 XXL: Continuous flow system for windows, doors and facades - Up to eight spindles for milling or drilling - Various cutting strategies from 22.5° to 157.5° (swivel) - Additional saw unit adjustable from 45° to 135° (tilting) - Combined cuts - Quick-change systems for tension rollers and clamping plates for atypical profiles - Mode for manual insertion and clamping of non-positionally stable profiles. Machine equipment - Loading magazine on the left for automated production process - Milling spindles that can be positioned 360° continuously relative to the profile bar, as well as 360° continuously adjustable cutting angles for machining profiles in various clamping situations. - A spacious soundproof cabin and easily accessible operating and maintenance elements facilitate work. - Processed profiles are placed on the unloading magazine in a material-friendly manner. Max. profile cross section (WxH) 320 x 160 / 160 x 320 mm Minimum profile cross-section 30 x 10 mm Bar length 7,600 mm Finished part length 350 - 7,600 mm feed magazine Shortest raw bar length 1,500 mm Number of swings: 5 Tedpjxtdwwsfx Aacod 10 mounting positions (over 120 mm 3-5) Transport Linear servo drive Electric gripper adjustment Y/Z Gripper rotation standard Fully automated remnant processing Processing station Axles 5 Milling spindles 8 (controllable) saw Axes 3 + 3 Saw blades (diameter) 2 (550 mm) Saw angle 22.5° - 157.5° (swivel), 45° - 135° (tilt) Standard door handle cutouts (top and back) Outfeed conveyor Hub station Yes Number of swing arms: 8 Wide outfeed conveyor belt 4,000 mm The system is in good condition, immediately available and will be loaded free of charge.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min Todpfx Aasxq Hhyocod total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, Year of construction: 2018, 2018 Type: 101-60 Machine No.:108141 electric double eyelet device with foot switch for inserting 2 eyelets at a fixed distance of 28mm Punches holes and eyelets in one operation. Eyelet type 8E, 8E 4long and 8E 5long Inner diameter 5.50mm Insertion depth 60mm Paper thickness 2 to 15 sheets (8E), 2 to 20 sheets (8E 4long) 5 to 25 sheets (8E 5long) Automatic eyelet feed via magazine Tjdsvccpbepfx Aacod Weight 49kg Available: immediately Located: Germany

Condition: good (used), Year of construction: 2018, Stock No.: 503624 Machine type/Device type: Dosing unit Manufacturer: MOTAN Model: MINIBLEND V-Y1 Year of manufacture: 2018 Volumetric dosing and mixing unit MINIBLEND V-Y1 with VOLUnet MC1 control unit, including METRO G 1.5l - HSS vacuum loader The MINIBLEND V-Y1 is mounted directly onto the feed flange of the processing machine. This design requires minimal space. A stainless steel insert in the mixing neck divides the main component into two material streams. These merge with the additives just before entry and form a homogeneous mixture. Tedexrflyjpfx Aaced

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. Todpfjxrb Rfox Aacod - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: refurbished (used), Year of construction: 2004, We have a Buhrs ITM - W+D BB600 14K year 2004 servo envelope inserting system available. The condition of this machine was already very good but we still given this machine complete maintenance and installed new parts where it needed it and even more! Tedpoq Ec Efofx Aacjd This BB600 is now equipped with 5 rotary feedes but this can be changed up to your demands. Other feeders and camera's optional possible! Year of built: 2004 Configuration: - 6 station base - 5x RF2 rotary feeder - Divert bin - Conveyor Would you like to see this machine? No problem, please come over and see it for yourself!

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt rubber, for bucket elevator, rubber conveyor belt, rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat, rubber strip, rubber strip with fabric insert, scraper bar, rubber lip -Conveyor belt: rubber strip with fabric insert -Width: 250 mm -Length: 23.5 m Tjdpfxsxc Ip Ao Aacjd -Thickness: 8 mm -Shipping/Price: complete -Transport dimensions: Ø 580 x 250 mm -Weight: 59 kg

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Tedpfxjxlm Nyo Aaced Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Todjxnlfxepfx Aacsd Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale + Insert belt

Condition: good (used), Year of construction: 2018, Stock no.: 503623 Machine type/Device type: Dosing unit Manufacturer: MOTAN Model: MINIBLEND V-Y1 Year of manufacture: 2018 Volumetric dosing and mixing unit MINIBLEND V-Y1 with control unit VOLUnet MC1 incl. vacuum conveyor METRO G 1.5l - HSS The MINIBLEND V-Y1 is mounted directly onto the feed flange of the processing machine, requiring particularly little space. A stainless steel insert in the mixing neck divides the main component into two material flows. Tedpfsxrfltex Aacsd These combine with the additives before feeding in and form a homogeneous mixture.

Condition: used, functionality: fully functional, Setmaster 5040 automatic sheet collating machine with jogger.) 24 deep-pile suction-fed stations, each of which is programmable. Suction cups to provide a gentle contact with the paper to avoid marking Touch screen programmer to control all functions, including the inserting facility. Production speed: Approx 1,900/2,600 cycles per hour. (adjustable speed control) Sheet size: Max 52cm x 42cm. Paper weight: 15 - 1,000 gms on all types of material Miss detection at each station with a double detector on exit Self-elevating 40cm capacity deep pile feed stations with programmable control Exit jogger with adjustable height, tilt and speed. Tsdpfx Aajxg Hz Escod Becker SVT 3.100 high-performance suction pump Power Supply: 400/440 volts - 3 Phase - 50Hz - 16a Can be seen running and available for inspection in West Yorkshire. We can arrange for delivery and installation services in the UK. POA This machine has been regularly maintained with a Setmaster-trained technician. ( Also available for installation and training) Please do not hesitate to ask if you need more information.

Year of construction: 2006, condition: refurbished (used), We have a Buhrs W+D BB300 10K envelope inserting system available. This machine is built in 2006. Year of built 2006 6 station base Tedpfomcbmzsx Aacsd Configuration: Buhrs BB300 - 10K SOLO 6 station base 4 rotary feeders 1 shuttle feeder Divert bin Conveyor belt Machine is completely ready for a Mueller transactional system channel. Feeding/reading/accumulating/folding A4 documents. A used Mueller transactional channel is optional also available. More and other feeders possible. Reading camera's for matching optional! Machine is ready after complete maintenance. Would you like to see a demo, please stop by!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Excellent Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in superb condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: [Insert size, e.g. 1250mm x 2500mm if known] Todpfxewb D S Ho Aacjd Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: good (used), Year of construction: 2019, Stock No.: 503622 Machine/Device Type: Dosing Unit Tsdpfx Aoxrfiljaced Manufacturer: MOTAN Model: MINIBLEND V-Y1 Year of Manufacture: 2019 Volumetric Dosing and Mixing Unit MINIBLEND V-Y1 with VOLUnet MC1 Control Device incl. METRO G 1.5l - HSS Vacuum Loader The MINIBLEND V-Y1 is mounted directly onto the feed flange of the processing machine. This ensures it requires minimal space. A stainless steel insert in the mixing neck divides the main component into two material streams. These flow together with the additives before entering and form a homogeneous mixture.

Condition: good (used), Year of construction: 2021, operating hours: 213,660 h, We have here a Francotyp-Postalia FPI2500 envelope inserter available. Todpfx Aetwcy Hsacod Year 2021 - counter 213.660!! 2 A4 document feeder 1 insert feeder Machine is working without any problem and is like new!

Condition: used, Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system needs to come in in our workshop so we are now still able to offer it as-is and/or after our complete maintenance programm. Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Tsdpexl Uq Esfx Aacsd Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: used, Year of construction: 2011, functionality: fully functional, We have a Buhrs W+D BB300 10K 12 stations envelope inserting system available. DL up to C4 envelopes. This machine is built in 2011. This system needs to come in in our workshop so we are now still able to offer it as-is and/or after our complete maintenance programm. Year of built 2011 12 station base Todpfxsxl Uqlo Aacod Configuration: Buhrs BB300 - 10K 12 station base 9 rotary feeders 1 HF3 vacuum friction feeder 1 AS25 shuttle feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: used, Year of construction: 2011, functionality: fully functional, We have a Buhrs W+D BB300 10K 12 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2011. This system needs to come in in our workshop so we are now still able to offer it as-is and/or after our complete maintenance programm. Year of built 2011 12 station base Configuration: Buhrs BB300 - 10K 12 station base 9 rotary feeders 1 HF3 vacuum friction feeder 1 AS25 shuttle feeder Divert bin Tedpfxjxl Um Hs Aacsd Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.