Used International 744 for sale (9,620)

Condition: good (used), Used Thetford International T3 waste compactor. Ijdpfx Afehvi Ahomsig

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Iiedpfxezz Side Afmjg Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement Iodpjfnlkwjfx Afmeig • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2020, GS International 10t Bj 2020 Width Length 12 mtr Hydraulic adjustable Iijdpfeznfduex Afmeg Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Condition: used, Year of construction: 2013, Overview  Iijdswhk Dvopfx Afmeg This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  - Capacity: 9,000 bph to 12,000 bph - Formats: Cork caps for cider and champagne glass bottles (75cl) - Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  - Wirehooder - Operator platforms

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Iodpfx Afozudu Ssmjig Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool Ijdpewgc I Rsfx Afmeig • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Iiodpfozgt D Hjx Afmog Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable - Control for mixing times - Extraction device Iedpfxod R Atrj Afmeig - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Ijdotx Ux Rjpfx Afmoig Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Iijdpfjwz Rfysx Afmog Diameter 2.15 m New electrics With hand and foot remote control

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Iodjif Ek Ropfx Afmoig Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Iijdpjw H Naajfx Afmeg Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Iijdpfx Asw Nrpbofmsg Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Isdewty Etspfx Afmeig

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 16-head rotary filling machine Iijdpfx Afszlhy Hjmjg with 2 checkweighers year: 2020

Condition: new, Year of construction: 2025, functionality: fully functional, New unit MASS International Rotary distributor SR Touchscreen control Motor 400V, 50Hz 360° working range Infinitely adjustable height and tilt Control via freely adjustable times or via potential-free contacts Adjustable discharge height 1100 – 1400 mm Adjustable feed height 600 – 900 mm Isdpfx Afozkr D Hjmoig Hopper width 500 mm, tapering to 200 mm Overall width 500 mm

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Iiodpfx Afjwq Rapomsg

Condition: new, Year of construction: 2022, functionality: fully functional, pressing force: 4 t, filling opening width: 715 mm, filling opening length: 550 mm, bale length: 510 mm, bale width: 710 mm, bale height: 600 mm, bale weight: 50 kg, total width: 830 mm, total height: 2,220 mm, total length: 785 mm, type of input current: AC, input voltage: 230 V, noise level: 70 dB, transport height: 2,220 mm, oil tank capacity: 4 l, power: 1.5 kW (2.04 HP), empty load weight: 375 kg, transport width: 835 mm, transport length: 790 mm, input frequency: 50 Hz, Brand new, unused vertical single chamber baler, manufactured in 2022. Ijdovy Drxspfx Afmsig Perfect for small businesses, baling cardboard or soft plastic (film). Simple connection with a plug to a 220V power supply. We can offer delivery for an additional fee or by arrangement. More information by whatsapp or phone.

Condition: new, New equipment Iijdehm Axgepfx Afmog MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements FDA-compliant belt Modified belt speed etc.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Iisdsu Ti Tvopfx Afmog Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Isdpfxod Tidxs Afmsig Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Iiedper A D S Eefx Afmeg Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, functionality: fully functional, New equipment MASS International Z series conveyor belt NDZ Angled conveyor / flow conveyor available for short-term delivery Example as shown in the picture: height-adjustable angled conveyor with adjustable angles NDZ 1 Infeed section 600 mm Ascending section 1300 mm Discharge section 500 mm Working width 250 mm Overall width 305 mm (without motor) height-adjustable discharge height 700 - 1000 mm adjustable angles for infeed and discharge sections adjustable inclination PU belt Color: black L-shaped cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button movable on steerable stop rollers three-part hopper plates for the infeed section Ijdpfx Asiz S Htsfmoig The quoted price applies to the NDZ1.

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/lay-down conveyor Angle-adjustable conveyor belt with a hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Iijdpfx Afjh Nyp Usmjg Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Movable on steerable swivel casters Optional: other dimensions, see standard delivery list dimensions according to customer specifications FDA-compliant belt modified belt speed etc.