Used International 434 for sale (9,108)

Condition: used, Type XY-2060, No 695, Year 2015, 16Amp, Voltage 400V, Pressure 410Mpa Ndjdox I R Uhspfx Ah Uef

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) Nodpfx Aowrn Iyeh Uedf The machine is CE-certified.

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Ndjdpfjwhk Dvsx Ah Ujf

Condition: new, Year of construction: 2026, Brand new installation from one of the world’s largest manufacturers, Dardi International / Flying Bridge design, 3x2 m cutting area, 2-D, linear guides with ball screw drives on all three axes, Yaskawa motors with controllers. Delivery time approx. 6–8 weeks, available directly in our showroom in Elsenfeld, with the following equipment: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x3m cutting area with stainless steel tank and wave-shaped replaceable steel supports - ESA PC control with WIN 11 - IGEMS 2-D CAD/CAM programming system including automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotary union Ndedex Ig Siepfx Ah Uof - Automatic central lubrication - High-pressure supply via profile stand and shut-off valve - Allfi® abrasive feed system 1.3 t fully automatic - Allfi® abrasive metering system 2.0, stepless adjustment without pneumatics - KEYENCE light curtains for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 26 years of experience in high-pressure waterjet systems. At extra cost: - High-pressure pump BFT Ecotron 40.37+ - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional: Manual tilting head available at extra cost – see pictures.

Year of construction: 1985, condition: good (used), Met International Used Hydraulic press Forming press 40ton Bed size 600mm X 600mm Four poster hydraulic press. H frame / C frame also available. Many other used presses for sale with cushion, different daylight and stroke. New hydraulic power presses available built to your specification. Cheap hydraulic presses. Large and small bed sizes available. Delivery and installation can be arranged. Ndodpfsn Awfysx Ah Uef

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Nodpsx Hqnrjfx Ah Uedf Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Nodpfx Ahowz Rfye Ujdf Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified. Ndjdeif Ek Rspfx Ah Usf

Condition: excellent (used), Now in stock at Glendale we have this JBI Punch 3400. This punch includes both 3:1 and 2:1 pitch punching tools. The Punch 3400 is electrically operated via a foot pedal or sheet pressure and offers automatic sheet ejection, hugely increasing production. This model is in excellent condition and perfect working order. When innovation makes productivity and flexibility compatible… Njdewpilhepfx Ah Uodf The Punch3400 is a heavy duty electric table top machine suitable for all punching applications when automatic equipment is not appropriate. Compact, it takes little working space whilst offering production levels higher than any other desk machine. Combined with the optional reception module, included with this machine, its unique punching, sheet ejection and stacking system in ONE operation provides one of the highest output (up to 18000 sheets per hour) in its range for a minimum investment. • Efficient : Punches bites of up to 30 sheets (80gsm) regardless of punching hole pattern. Punching, ejection and stacking in ONE operation with optional reception module re-delivering the punched sheets in the right order for increased productivity. • User friendly : Easy edge to hole margin adjustment. Selectable operation mode (sheet presence detector or foot pedal). Easy and accurate vertical sheet insertion. Reversing switch for quick release of paper jams. • Versatile : Fast and easy punching tool change over. All punch pins can be easily disabled for custom punch patterns. Specifications Manufacturer James Burn International Model Punch 3400 Max sheet size 340mm x 340mm Punching capacity up to 30 sheets (80gsm) Cycle speed 60 punches per minute Punch operation Foot pedal or sheet detector Punch tools included 3:1 & 2:1 pitch for wire binding Power requirement 220/240v 50Hz Machine weight 50kg + table Dimensions L680mm x W565mm x H460mm (excluding table)

Condition: excellent (used), REF: MM6222 1 X  J&E Hall Fusion 40ft Chiller/Freezer Container. The J&E Hall Fusion 40ft Container is a high-specification, industrial-grade refrigerated unit designed for flexible, large-volume cold storage and transportation. As a versatile solution, it operates as both a chiller and a freezer, offering exceptional reliability, precise temperature control, and superior energy efficiency. Nsdpfx Ajxiw A Sjh Uedf This 40ft unit is built into a standard ISO shipping container frame, making it robust, stackable, and easily transportable globally. It is an ideal asset for logistics, food processing, pharmaceuticals, and any business requiring high-capacity, critical temperature management. Key Features and Benefits Dual Functionality: Operates efficiently as both a chiller (for fresh produce, dairy, etc.) and a deep freezer (for frozen goods) -25 degrees, offering maximum versatility. Fusion Technology: The cooling system is engineered for reliable, uniform air distribution and temperature stability, which is crucial for maintaining product integrity across the entire 40ft length. Robust Construction: Built on an ISO standard frame, ensuring structural integrity and suitability for harsh outdoor conditions and intermodal transport (sea, rail, road). High Capacity: The 40-foot length provides significant volume, making it perfect for bulk storage or large-scale temporary temperature control requirements. Hygienic Interior: Features smooth, non-corrosive internal finishes that facilitate easy cleaning and compliance with food safety standards.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HFT.130, cooling capacity: 139 kW (188.99 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 1,096 mm, total length: 3,355 mm, total height: 2,205 mm, heating capacity: 139 kW (188.99 HP), Hitema International HFT.130 AIR TO WATER REVERSIBLE HEAT PUMP Cooling Capacity: 139kW Heating Capacity: 139kW Njdpfx Ahjx E S Tyj Ujdf Heat pump with 2 scroll compressors, R410A refrigerant, brazed plate evaporator/condenser, condenser/evaporator coil with copper tubes and aluminum fins, AC axial fans. IP54 protection rating, chillers suitable for outdoor installation Technical data sheet available on request

Condition: new, New device MASS International Angle Conveyor Belt NDS Njdpfor A D S Esx Ah Uedf L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Ndedpfxetx Ux Rs Ah Uef Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Nsdpfefnlkwex Ah Ujdf Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: good (used), Used Thetford International T3 waste compactor. Ndedpfx Ahehvi Ahj Uof

Condition: excellent (used), functionality: fully functional, operation weight: 4,700 kg, Year of construction: 2018, Description Hoeflon C10 compact crane This compact crane is ideal for work in hard-to-reach places. The Hoeflon C10 is renowned for its maneuverability and power. Contact us for more information and a viewing. Technical specifications: Nodsxnxq Ispfx Ah Usdf Hour meter readings: - contact: 616 - diesel engine: 150 - electric motor: 102 Year of manufacture: 2018 Color: Hoeflon original The crane will be delivered with maintenance service and inspection by Hoeflon Nederland.

Condition: excellent (used), IM Very good condition. Nedpfsw Ebwuex Ah Usdf

Condition: new, New device MASS International Z-conveyor NDZ Angled conveyor / conveyor belt Available at short notice Example as shown: Height-adjustable angled conveyor belt with adjustable angles Infeed section 600 mm Incline section 1300 mm Discharge section 500 mm Njdpfoiz S Htjx Ah Uedf Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Adjustable angles for infeed and discharge sections Adjustable incline PU belt Color: black L cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable locking rollers Three-piece hopper trays for infeed section

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Power: 220 volt. Table not included Ndodexiwb Uspfx Ah Uof

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material Ndodpfjwgc I Rsx Ah Usf • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Ndsdpfx Aexnp Rxoh Uof

Condition: new, New device MASS International Model NS1 Njdpfsuip Ilsx Ah Uodf Angle conveyor / L-conveyor / conveyor belt Available at short notice Adjustable angle conveyor NS1 with collecting plates in the feed section Example as shown: Feed section: 600 mm Incline section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and incline section Tilt angle variably adjustable Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on lockable swivel castors Three-piece hopper plates for feed section Other angle conveyors available in different dimensions, see list image 4. Custom dimensions are no problem.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 Njdsfhgvwspfx Ah Uedf incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, New device MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as shown: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Nedjd Tidxepfx Ah Uodf External width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles for the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel castors with brakes Side collecting plates in the infeed section Also available as an angled conveyor with supergrip belt and separator (see last two photos) Double roller separator with covered belt drive Covered with super grip Adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor / Belt Conveyor L-shaped conveyor belt with fixed 35° angle Available at short notice MASS International Angle Conveyor NC1 Conveyor belt with fixed angle and collecting plates in the infeed section Example as illustrated: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Nsdpohm Axgsfx Ah Ujdf Height-adjustable discharge height 750 - 1050 mm Fixed angle between infeed and inclined section Inclination variably adjustable Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on swivel castors with brakes Optional: Dimensions to customer specification FDA-compliant belt Modified belt speed etc.