Used International Paystar 5000 for sale (10,958)

Condition: excellent (used), Year of construction: 2008, operating hours: 12,100 h, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, color: yellow, BAUMANN sideloader Year of manufacture: 2008 12,100 operating hours Fork spread adjustment New tires Lifting height: 4.5 meters Maximum load capacity: 5,000 kg Cevoman bv. Lenskensdijk 5 2200 Herentals Dodpfx Aszi Trconysuw Belgium

Condition: excellent (used), color: other, first registration: 10/2008, Year of construction: 2008, Dimensions (LxBxH): 230 x 275 x 173 cm Technical condition: very good Visual appearance: very good Dedpfx Ajzkgr Ssnyjuw

Condition: new, 10000 kg length 5000 mm width 2000 mm loading area height 700 mm Heavy-Duty Trailers - Industrial Trailers - Available immediately from stock Dsdpjzg Nltjfx Anyjuw

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Dusdpfx Asywwrfjnysw Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Ricoh IP5000 AD3/AD4 128m Counter A: 100 million Counter B: 80 million Dodpowk Eilsfx Anyouw Includes Hunkeler UW6 and RW6 with tight web control!! Hunkeler POPP6 Roll2Roll Pictures are available upon request. All of the equipment mentioned is not for sale/resale in Russia, or in any country subject to an EU embargo.

Condition: used, Year of construction: 1995, centre height 250 mm centre distance 1.300 mm engine 1,4 kW Heavy-duty copying lathe (or copying woodturning lathe) Hapfo Model AP 5000/ME for precise woodturning and copying of wooden workpieces. Ideal for single-piece and batch production of stair balusters, railing posts, table legs, and furniture parts; the ME model features an electric feed mechanism for consistent machining results. Includes a wide range of accessories. Dodpfxszk Rgmj Anyjuw

Condition: excellent (used), IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via field bus interface Extended IPG power supply with integrated safety features Laser emission ON watchdog Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year of manufacture: 2011, Serial number: 11101050 Condition: used Scope of delivery: (See image) Dsdpfx Aozg Evusnyjuw (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), power: 54 kW (73.42 HP), fuel type: diesel, color: other, lifting height: 3,500 mm, Year of construction: 2022, operating hours: 212 h, Technical information Steering: articulated Engine type: Kubota V3307-CR-T-EW03 Measures Dimensions (LxBxH): 417 x 146 x 252 cm Weights Empty weight: 5.000 kg Carrying capacity: 1.360 kg GVW: 6.360 kg Functional Lifting capacity: 2.800 kg Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = Dujdpfxezili To Anyow - 3rd hydr. circuit - Blower - Hydraulic quick coupler - Mudguards - Pallet forks - Radio - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Nederland Condition CE type: CE Tow bar, drawbar, pallet forks, hydraulic sweeper with collection bin and watertank and a 4-in-1 bucket, extra valve

Condition: ready for operation (used), * Brand: Svedala * Model: vibrating chute Dodpfx Aszgf Aujnyjuw * Dim: length 5000 mm - width 1000 mm * incl.: steel construction and grizzly bars.

Condition: used, Year of construction: 1991, Technical details: spindle diameter: 100 mm Dsdpszk Ezrofx Anyjuw x-travel: 5020 mm y-travel: 1000 mm z-travel: 2000 mm control: Heidenhain 415 B tool taper: SK 50 • For sale without floor plate. • Equipped with an indexable universal milling head, adjustable in 2.5° increments. • 60-position automatic tool changer. • Including Scharmann rotary table (rotation function defective – sold with this known defect). • Rotary table size: 2,500 × 2,000 mm. • The machine can be inspected under power at its location in Saxony, Germany, by appointment upon request. *

Condition: excellent (used), Vertex pneumatic tapping machine on articulating arm. Mounted to table 1800 x 900mm area. Dodpjy Tl Rbsfx Anyjuw

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Dujdot Hwupspfx Anysw * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm Dusdpfot Hw T Ssx Anysw throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm Duodpfx Ast Hwvtsnysw throat mm total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Dsdpfxexyllvj Anysuw Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm grinding depth 450 mm swing diameter 660 mm Dodpfxsyrtwrs Anysuw

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Duodpsw U U Iqsfx Anyow SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Year of construction: 1985, internal diameter 300 mm Dedpfx Asyrtvzjnyjuw grinding depth 450 mm swing diameter 660 mm

Condition: good (used), Year of construction: 2017, Horizontal machining center Machine type: DMG MORI NHX 5000 Control: M730UM mit Celos Year: 2017 SPECIFICATIONS Travel X-Axis: 730 mm Y-Axis: 730 mm Z-Axis: 880 mm Rapid motion: (X/Y/Z): 60 m/min. Feed: (X/Y/Z): 60 m/min. Dedpfezinbxjx Anyouw Spindle speeds: 15.000 rpm Spindle motor: 37 kW Torque: 250 Nm Toolchanger Tool: HSK 63 Tool capacity: 60 Work piece diameter: 70 / 140 mm Tool lenght: 550 mm Tool weight: 12 kg Palett system Amount of paletts: 2 Palett size: 500 x 500 mm B-Axes: 0,001° Max. Table Load: 500 kg Equipment Chip conveyor Filtration system: Knoll KF 110/700 Internal cooling: 70 bar

Condition: good (used), Year of construction: 2002, functionality: fully functional, grinding diameter 20-35mm X-travel 450mm, Z-travel 200mm Dodpfey Ix Ezsx Anyeuw exhaustion device, extinguishing system weight ca. 4000kg

Condition: used, No. 10031 Mobile screening plant with trailer Spaleck SEWU 2400 x 5000 Used According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Screening plant Spaleck SEWU 2400 x 5000 Used, year of construction 2012 Trailer Multi-Trans ZAL 4PA Used Load capacity 47000 kg Weight 8600 kg Conveyor belt STK Metall ML-BAND Used, year of construction 2012 Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Dsdpjyl Sg Sofx Anyjuw Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2005, Punching capacity 220 kN plate thickness 8 mm working area 2535x1280 mm Djdpfxozk Rfij Anyouw sheet thickness for stainless steel 4-6 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC laser cutting machine TruLaser 3030 (L20) 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Duodpjzix Upefx Anyjw Control system: Siemens Sinumerik 840D SL Laser power: 5000 Watt Operating hours: 43,349 hrs Laser beam on: 29,598 hrs Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Closed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit - Automatic pallet changer in the longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Lens with RFID chip Control system - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panes - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment and LensLine with automatic condition monitoring) - CoolLine - Extended pallet infeed - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  Dujdswrxqxopfx Anyjw 6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: excellent (used), Keyence Here we offer a 3D profilometer. Technical specifications: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measurement resolution 0.1 μm: Height measurement: Height measurement range, without image composition in Z: 10 mm 1 mm With image composition in Z: 50 mm 30 mm Repeatability (σ)*1, without image composition in Z: 0.4 µm With image composition in Z: 1.0 µm Width measurement: Measurement accuracy*1, without image composition in Z: ±2.5 μm With image composition in Z: ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes control unit VR-5000 + software with licenses Type: VR-5200 + VR-5000 Duedpezd Uhzsfx Anyow For sale from our location! Condition: fully functional + no signs of wear For further technical information, please refer to the manufacturer. Scope of supply: (As shown in the picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.