Used Ion-Exchanger for sale (7,499)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour Cedsviwdmepfx Aa Njgp bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm Csdjwdta Ejpfx Aa Negp y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Year of construction: 2023, condition: used, functionality: fully functional, The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 6.1/1 Electric model with 6 GN 1/1 shelves is easy to operate even for untrained personnel, as it delivers outstanding food quality without the need for constant supervision. The ultra-fast interim and self-cleaning functions keep your unit spotless. The unit has undergone a thorough inspection in our in-house professional workshop and is fully functional. The stand shown in the photos is not included in this offer but can be purchased separately for an additional charge. You will receive an invoice with VAT stated. Service: We are happy to assist you in finding a certified Rational service partner anywhere in Germany. Our equipment service for you: • 6-month warranty on electrical components, limited to replacement of faulty parts (excluding labor costs for removal and installation) • Premium branded equipment at fair prices • Professional and competent advice—before and after purchase • Flexible shipping or self-collection options • Provision of user manuals, wiring diagrams, and spare parts • Full range of accessories at attractive prices Condition: Used, inspected, fully functional Technical data: Dimensions (W x D x H): 850 x 842 x 754 mm Minimum door opening for delivery (W x H): 800 x 800 mm Serial number: E61SJ223033047839 Year of manufacture: 2023 Max. load per shelf: 5 kg Max. total loading capacity: 30 kg Weight (electric version): 99 kg Electrical requirements: Voltage: 3-phase, 400 V Connected load: 10.8 kW Steam output: 9 kW Hot air output: 10.25 kW Circuit protection: 16 A Water connections: Inlet (pressure hose): 3/4 inch Drain: DN 50 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Delivery to islands or mountain stations only by prior arrangement Specifications and details subject to change or error. Do you have questions, need advice, or would like to view the unit on site? You can reach us by phone during our business hours: Monday-Friday 09:00 – 13:00 and 14:00 – 17:00. Cjdpfx Aasyrb Ulo Nsgp Sales are made exclusively in accordance with our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 55,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, total height: 2,590 mm, total width: 2,772 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 7,360 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA 700LM was manufactured in 2023. It features a maximum turning length of 3,200 mm and a swing over bed of 900 mm, making it suitable for heavy-duty operations. The machine is equipped with a robust 24" chuck and a powerful spindle motor with a maximum torque of 8,076 Nm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 700LM turn-mill centre we have for sale. Contact us for further details. • Chuck size: 24" (610 mm) • Bar capacity: 164 mm • Rapid traverse (X/Z): 12 / 10 m/min Cjdpfxoyrt Haj Aa Nogp • Max torque: 8,076 Nm • Swing over bed: 900 mm • Spindle motor power: 55 / 45 / 37 kW • Max turning length: 3,200 mm • Turret: 12 stations, BMT 85 interface • Guideway type: Box guideway • Tailstock: Programmable with integrated quill bearing • Application: Universal heavy-duty center for interrupted cuts and high-precision shaft production • Material/casting: Meehanite cast design for high damping • Rigidity: Box guideways for extreme stability in heavy-duty operations Additional equipment • Steady rest: Steady rest carrier SLUSZ • Calibration: Tool setter (auto-hydraulic) • Automation: Auto door • Cooling: High-pressure turret cooling, 14.5 bar • Maintenance tools: Compressed air gun; oil skimmer Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,350 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. It features a maximum spindle speed of 4,500 RPM and a chuck size of 8" (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details. • Chuck size: 8" (204) • Bar capacity: 65 mm • Y travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Design: High-performance compact turning center with a space-saving design • Productivity: Fast idle times; tool turret with BMT interface • Application: Suited for producing small parts with high precision Additional equipment • Bar feeder interface • Chip conveyor • Parts catcher • Tool setter (electric) • Oil skimmer • 3-color signal light Cgodpfxjyrt E Ns Aa Njp Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022. It features a table size of 1,400 x 670 mm, with an impressive X-axis travel of 1,270 mm and a Z-axis travel of 625 mm. The machine is equipped with a maximum spindle speed of 12,000 RPM and a tool magazine capacity of 40 stations. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • Table size: 1,400 x 670 mm Cgodpjyrt E Aefx Aa Nsp • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 18,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,759 mm, total width: 1,632 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,941 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA GT2100M was manufactured in 2022. It features a maximum spindle speed of 4,500 RPM and a robust turret with 12 stations. The machine is designed for high-precision turning and milling, with an X travel of 230 mm and Z travel of 580 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA GT2100M turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204) • Bar capacity: 65 mm • Rapid traverse (X/Z): 24 / 30 m/min • Turret: 12 stations, BMT 55 interface • Guideway type: Box guideway • Cooling system: Coolant pump 7 bar • Monitoring: Load monitoring • Design: Box-guided horizontal turning center with high torque • Performance: Optimized for stable and high-precision machining • Construction: High-speed turret and rigid spindle design Additional equipment Cjdeyrt Evspfx Aa Negp • Oil skimmer (filtration) • 3-color signal light (automation) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, total height: 1,921 mm, total width: 1,711 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 1,921 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100LYB was manufactured in 2022. It features a maximum spindle speed of 4,500 RPM and a chuck size of 8" (204 mm). The machine includes a Y-axis travel of 105 mm and a Z-axis travel of 560 mm, providing enhanced turning capabilities. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100LYB horizontal turning machine we have for sale. Contact us for further details. Codpfx Aaoyrtu De Nsgp • Chuck size: 8" (204) • Bar capacity: 65 mm • Y travel: 105 mm (total stroke calculation: 30 / 36 mm indicated in sequence) • Turret: 24 stations, BMT 45 • Guideway type: Roller linear guides • Tailstock: Programmable hydraulic NC tailstock • Notes: High-performance compact center; BMT interface turret with high-speed servo indexing; roller linear guides for rigidity on small parts Additional equipment • High-pressure cooling through turret • Oil skimmer (filtration) • Parts catcher with box • Tool setter (auto-electric) • Bar feeder interface • Load monitoring • EOP (Easy Operation Package) software Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Cgsdpfjyk Ip Tex Aa Nop Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: ready for operation (used), Year of construction: 2021, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, total width: 1,400 mm, total height: 1,935 mm, bar diameter (max.): 45 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 30 mm, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 2,090 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA swiss type turning machine we have for sale. Contact us for further details. • Axis count: 4 (X, Y, Z, C) • X-axis travel: 450 mm (radial tool movement) • Z-axis travel: 340 mm (longitudinal part travel) • Y-axis travel: 30 / 36 mm (vertical travel for off-center milling/drilling) • C-axis: Spindle rotational positioning and contouring • Chuck size: 6" • Bar capacity: 45 mm • Turret stations: Up to 12 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Tooling: Tool slide for secondary operations • Design: High-performance compact center optimized for small precision parts • Performance: Fast turret indexing and high-rigidity linear guide system Additional equipment • Chip conveyor • Oil skimmer • Parts catcher with box • Parts ejector • Bar feeder interface Cgedeyrtinjpfx Aa Nsp Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 630 mm, travel distance Z-axis: 1,585 mm, total height: 3,025 mm, total width: 2,360 mm, controller manufacturer: FANUC, controller model: 0i-F with 15" display, product length (max.): 5,125 mm, number of axes: 7, This 7-axis DN SOLUTIONS PUMA MX2600ST was manufactured in 2023. It features a maximum spindle speed of 4,000 RPM and a bar capacity of 76 mm. The machine is equipped with a multi-tasking configuration, including 3 spindles and a lower turret with 12 stations. If you are looking to get high-quality milling and turning capabilities, consider the DN SOLUTIONS PUMA MX2600ST mill-turn centre we have for sale. Contact us for further details. • Configuration: Multi-tasking with 3 spindles and lower turret • Chuck size: 10" (255 mm) • Bar capacity: 76 mm • Travels: • X1 / X2: 630 / 230 mm • Z: 1,585 mm • Axis count: 7 (fully controlled) • X1 / Z1 / Y1: Milling spindle axes • B-axis: Milling spindle swivel/tilt (approx. 240° range) • X2 / Z2: Lower turret axes • C-axis: Spindle indexing/rotation • Spindle motor power: 26 / 22 kW • Spindle architecture: 3 spindles including top-mounted milling spindle • Lower turret: 12 stations, BMT 65 interface • Tooling interface: CAPTO C6 (milling head) • Guideway type: Linear guideway • Precision: 0.001° indexing accuracy in B and C axes Cjdpfsyrtc Uox Aa Nogp • Thermal control: Intelligent heat compensation and optimized cooling to minimize thermal displacement • Cooling system: Coolant flushing for right/left spindle; high-pressure coolant through lower turret and milling spindle • Filtration/monitoring: Level monitoring; flow monitor • Data/software: AICC contouring; Data Server 1 GB Additional equipment • Renishaw RMP60 probe • Tool setter • Auto door (automation) • Oil skimmer

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light Technical Specification Cgsdpfxjyrtbqo Aa Nep Driven Tools Yes Counter Spindle No

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 15,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 230 mm, total height: 2,070 mm, total width: 2,300 mm, controller manufacturer: FANUC, product length (max.): 3,510 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT1300SYYB turn-mill centre was manufactured in 2019. It features a twin-spindle and twin-turret configuration, allowing for independent operation. With a maximum spindle speed of 6,000 RPM and integrated high-speed C-axis and Y-axis, it offers advanced capabilities for complex machining. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT1300SYYB machine we have for sale. Contact us for further details. • Configuration: Twin-spindle / twin-turret (independent operation) • Chuck size: 6" (170) • Bar capacity: 51 mm • Travels: X1/X2 135/80 mm; Z1/Z2 530/530 mm; Y-axis 30/40 mm • Spindle motor power: 15 / 11 / 7.5 kW • Turret stations: 12 / 12 (BMT 45) • Guideways: Roller guideway • Capabilities: Integrated high-speed C-axis and Y-axis for complex machining Additional equipment • High-pressure coolant through turret • Oil skimmer • Coolant supply through right/sub-spindle • Parts ejector (sub-spindle) Cgsdpeyrr Suofx Aa Nep • Parts catcher at main spindle with collection box • Parts removal conveyor belt for sub-spindle • Tool setter (automatic electric) • Automatic shut-off • Bar feeder interface (bar feeder not included) • 3-color status light Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): 15" (380 mm) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 Codsyrr Rwspfx Aa Nsgp • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Chip conveyor • Coolant pump, 10 bar • Oil skimmer • 3-color warning light Technical Specification Driven Tools No

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Command by double buttons Motor 7.5kw 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents Cjdpfoyngb Aex Aa Nsgp

Condition: excellent (used), Roller wrench (28210) Collet wrench Cgodpfx Aajhhyyxo Nop Make Fahrion Total length 495 mm

Year of construction: 2019, condition: used, High precision sheeter Champion CHM 1400 E Year: 2019 Equipped with: - Double roll stand shaftless - Rotary sheet cutter - High pile delivery - Colour monitor touch screen - Servo driven Working width: max 1400 mm Cgedpfx Ajyll A Hsa Nop

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Cgjdjx Uz Ilopfx Aa Nsp Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: E11SI19022730817, This listing is for a Rational SCC 101 WE combi-steamer, electric version, with a left-hand door hinge, from the premium manufacturer Rational. The unit is from the SCC series and features triple glazing and LED lighting. The combi-steamer has undergone a comprehensive inspection in our in-house workshop and is fully functional. The pictured stand is not included in the offer but can be purchased as an optional extra. MSRP: €12,920 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist in arranging a certified Rational customer service provider for you. Cedpfx Aaoypm The Nogp Looking for a specific Rational model? Ask us — we have access to a wide assortment of new and used equipment. We are happy to advise you on all device types. Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective components (excl. labor) - Top-brand quality at fair prices - Professionally refurbished, inspected, and thoroughly cleaned - Tested and fully functional—or your money back - Flexible shipping or self-collection - Expert advice before and after purchase - Provision of user manuals, wiring diagrams, and spare parts - Tested in accordance with DGUV V3 This combi-steamer accommodates 10 x 1/1 GN containers. In automatic mode, the device autonomously determines the optimal cooking process for 7 applications (meat, fish, poultry, side dishes, egg dishes, bakery products, and finishing), as well as the size and quantity of the load, and specific product requirements. Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 1042 mm - Minimum doorway size for transport (W x H): 845 x 1050 mm - Power connection: 400 V / 18.6 kW / 50-60 Hz - Capacity: 10x 1/1 GN - Weight: approx. 132 kg - Serial number: E11SI19022730817 - Year of manufacture: 2019 Condition: used, fully functional Further details: - Three operating modes in combi-steam mode: Steam (30°C to 130°C), Hot Air (30°C to 300°C), Combination (30°C to 300°C) - CareControl self-cleaning - Core temperature probe - Retractable hand shower - 8.5" color display with touchscreen - Five programmable fan speeds - Integrated maintenance-free grease separation system - Automatic start time pre-selection - Seven cleaning stages for unattended cleaning, including overnight - Three-level humidity adjustment (30°C to 260°C) - Five programmable proving stages - USB interface - Seamless, pan-shaped hygienic cooking chamber with rounded corners - Halogen chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by arrangement Subject to changes and errors. Do you have questions, need advice, or want to see the equipment in person? You can reach us by phone during our business hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. Sale is made exclusively under our general terms and conditions (GTC).

Year of construction: 2012, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E11MH12112325683, This is a CMP 101 combi steamer from the premium manufacturer Rational, in electric version. The unit has been fully overhauled in our in-house workshop and is in perfect working condition. The stand shown in the photos is not included in the offer but can be purchased as an optional extra. The images provided are sample pictures. Original photos will follow shortly. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in finding a certified Rational customer service provider anywhere in Germany. Are you looking for a specific Rational device model? Ask us! We have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. This device is the perfect choice if you are looking for a classic combi steamer that you wish to operate manually. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, without labor costs for installation/removal - High-quality branded equipment at fair prices - Professionally overhauled, inspected, thoroughly cleaned, tested & fully functional – or your money back - Flexible options for shipping or self-collection - Expert advice before and after purchase - Provision of user manuals, wiring diagrams, and spare parts - DGUV V3 safety inspection The RATIONAL CombiMaster® Plus is robust and impresses with its features, enabling the highest food quality. It supports the chef’s craft skills with precisely controlled cooking chamber climate as well as exact adjustment of temperature, humidity, airflow, and cooking time. Technical data: - W x D x H: approx. 847 x 776 x 1042 mm - Minimum door opening for transport W x H: 845 x 1050 mm - Power supply: 400 V / 18.6 kW / 50-60 Hz - Capacity: 10 x 1/1 GN - Weight: approx. 132 kg - Serial number: E11MH12112325683 - Year of manufacture: 2012 Condition: Used, serviced, fully functional Further specifications and application possibilities: - Steam mode: 30°C to 130°C - Hot air mode: 30°C to 300°C - Combination mode: 30°C to 300°C - Finishing® function: Bring pre-prepared and chilled food to serving temperature in an optimal climate Cgedpfx Aajyplnke Nsp - Automatic fat separation for clean cooking chamber air - Manual cleaning program - 5 fan speeds: Whether delicate or robust, the CombiMaster® Plus offers the right airflow for every product - Double-glazed, ventilated door (swivels for easy cleaning) - LED cooking chamber lighting - Core temperature measurement with probe - Cool-down function - High-performance fresh steam generator (automatic rinsing and draining) - Retractable hand shower - Dynamic air circulation Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to change and error. If you have any questions, would like advice, or wish to view the unit on-site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. The sale is exclusively subject to our General Terms and Conditions (GTC).

Condition: new, functionality: fully functional, machine/vehicle number: 60.21.287, This is a rack trolley from the premium manufacturer Rational, suitable for combi steamers of size 20-1/1. The rack trolley accommodates 15 x 1/1 GN trays. With a rail spacing of 84 mm, you may achieve better yield during loading compared to rack trolleys with 20 slots. Cgjdjyfuhrspfx Aa Nep RRP (gross): €2,528, our special price: €1,399 (gross). You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging certified Rational customer service. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new stock. We are happy to advise you on all device types. Our used-equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective parts, excluding labor and installation/removal costs - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested and fully functional – or your money back - Flexible choices for shipping or self-collection - Competent advice – before and after your purchase - Provision of operation manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Technical data: - Dimensions (LxWxH): 824 x 561 x 1743 mm - Clearance bottom slot to cooking chamber opening: 142 mm - Clearance top slot to cooking chamber opening: 131 mm - Maximum insert height: 1.60 m - Weight: 34.9 kg - Material: stainless steel - Article number: 60.21.287 Condition: New Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to change and error. Do you have questions, require consultation, or would like to view the product on site? You can reach us by phone during our office hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: used, This is a Hordengestellwagen (rack trolley) from premium manufacturer Rational, suitable for the SCC/CM combi steamers in size 20-1/1 GN. MSRP (Gross): €2,400, our special price: €1,495 gross Csdpfx Aasypcfye Nsgp You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging a certified Rational customer service. Looking for a specific Rational device type? Just ask us! We have access to an extensive range of new and used equipment. We are happy to advise you on all device types. Our used equipment service for you: - 6-month warranty on electrical parts, limited to the replacement of defective components, excluding labor and installation/removal costs - High-quality branded equipment at fair prices - Professional overhaul, inspection & expert cleaning - Tested & fully functional – or your money back - Flexible choice between delivery or collection - Expert advice before and after your purchase - Provision of user manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 Technical specifications: W x D x H: 772 x 1016 x 1717 mm Clearance below lowest tray to cooking chamber opening: 50 mm Clearance above highest tray to cooking chamber opening: 87 mm Max. tray insertion height: 1.60 m 20 tray slots Equipped with container locking mechanism Loadable from both sides U-rails 4 tandem swivel castors (2 with parking brake – metal components made of stainless steel) Removable and drainable drip tray Rail spacing: 63 mm Weight: 65 kg Material: Stainless steel Article number: 60.22.086 Capacity 2/1 GN roasting and baking trays, racks x 20 Chicken grill rack H6-1/1 (up to 1,500 g) x 12 Chicken grill rack H8-1/1 (up to 1,300 g) x 12 Chicken grill rack H10-1/1 (up to 950 g) x 12 1/1 GN 20, 40, 55 mm deep x 40 1/1 GN 65, 90, 100 mm deep x 12 Use of other containers: 1/1 GN, 2/4 GN crosswise Stainless steel (1.4301) Condition: Used Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have questions, need advice, or would like to view something on site? You can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, functionality: fully functional, color: other, Year of construction: 2025, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? Cgsdsxqhy Ropfx Aa Nep CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Cjdpfxoxqgwzo Aa Njgp Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2015, condition: used, functionality: fully functional, This listing is for a Rational SCC 202 WE electric combi-steamer from the premium manufacturer Rational. This is the XXL format, offering space for 20x 2/1 GN or 40x 1/1 GN containers. The unit is from the year 2015 and has undergone a comprehensive inspection in our in-house workshop; it is fully operational. You will receive an invoice with VAT shown separately. Sample photos are provided; originals will follow shortly. Cgedpfx Aaeynzxce Nep Available from week 12. Service: We are happy to help you find a certified Rational customer service partner anywhere in Germany. Looking for a specific Rational appliance model? Ask us! We have access to a comprehensive range of used and new equipment. We are happy to advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - 6 months’ warranty on electrical components, limited to replacement of defective parts (installation/removal excluded) - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Flexible shipping or self-collection - Expert advice before and after purchase - Provision of operating manuals, wiring diagrams, and spare parts - Safety inspection according to DGUV V3 This combi-steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the unit independently determines the ideal cooking process for seven applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), the size of the food, the loading quantity, and product-specific requirements. Technical Data: Dimensions (W x D x H): approx. 1,084 x 996 x 1,782 mm Minimum doorway clearance for transport (W x H): 1,145 x 1,900 mm Electrical connection: V: 400 / kW: 65.3 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SH15072467033 Year: 2015 Condition: Used, fully inspected, fully functional Further Features: - Three operating modes: Steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Core temperature probe - Hand shower with automatic retraction - 8.5-inch color display with touchscreen - 5 programmable fan speeds - Integrated, maintenance-free grease separation system - Automatic start time preselection - 7 cleaning levels for unattended cleaning, including overnight - 3-stage steam setting adjustable from 30°C to 260°C - 5 programmable proofing stages - USB interface - Seamless, hygienic cooking chamber with coved corners - Halogen cooking chamber lighting - Meals per day: 300–500 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior arrangement If you have questions, require advice, or would like to visit us in person, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. All sales are subject exclusively to our general terms and conditions (GTC).