Used Section steel shears 0 - 49t punching power for sale (44)

Year of construction: 1990, Condition: used, Flat steel scissors 45N / mm²: flat steel: 350 x 20 mm 230 x 20 mm Shear: L steel 90°: 140 mm x 13 mm L steel 45° 70 x 7 mm Rod shear: round steel: 45 mm Square steel: 42 mm Notchers: Square Hole punch ø: up to 40 in 16 mm Pressure capacity: 550 kN Lelhcdjdczt Eowvohg RADIUS: 305 mm Rated power: 5.5 kW 2 working cylinder with 2 separate electric foot switches for 2-man operation Dimensions (L x W x H): approx. 1360 x 750 x 1565 mm Weight: 1260 kg

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: Lelhcdohxzmcowvshg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), machine/vehicle number: 98260075, one used profile steel shear WMW Lolhcdweb Ilbfsvohg Punching capacity 420kN(42Tons) throat of the punch 320mm flat steel shear shears 100x18mm bar shear shears solid material round/square 36/30mm Further technical data on request.

Condition: used, Max. punching and shearing power: 400 kN Punches e.g. 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request Lhslhswfrc Iscdwvjg With a range of punches and dies as desired

Condition: excellent (used), Year of construction: 1970, Machine type: 5-fold combined profile steel shears with punch, Power in mm: , Sheet metal: 10 mm, Round: 28 mm, Hole: 15 in 10 mm, Lslhsd R Dkfscdwvjhg Drive type: el./mech., Drive: 1.5 kW, Comment: Punch, Clinker, Material stop, Bogie Weight: 500 kg,

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t shear : steel sheet max. 10 mm shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material Lholovw Dvlohcdwvsg strength of 450N/mm². Machine dealer with own stock of 1600 m².

Condition: good (used), punching pressure: 36 t, – Capacity: 36 tons – Hydraulic – 3 stations – Foot operation – Lighting – Emergency stop – 400V Lhjlhcdwowdg Ipjvjg

Year of construction: 1994, Condition: good (used), machine/vehicle number: 2466, Offer 14415 Technical data: - Flat steel shears cuts up to 350 x 6 mm - 200 x 12 mm Lhslhcdwsi E Hfuovsg - section steel shears - cuts - L-steel at 90° up to 80 x 8 mm - bar steel shear - cuts - round steel up to 30 mm - square steel up to 25 mm - punching machine - punching force 380 KN - throat 175 mm - punches holes in steel up to 27 mm Ø in 10 mm - drive 400 V / 2,2 kW - space requirement approx. W 500 x H 1280 x D 1000 mm - weight approx. 900 kg

Condition: used, Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 3009.87, peddinghaus punching and cutting machine. for specifications and capacities see nameplate on images. Ljlhowazncjcdwvohg

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Performance: Lolhcdsv Ta Ucowvshg Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still powered.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 850 h, Functionality: fully functional, machine/vehicle number: 14089165, Fully functional machine with a large number of punches and other accessories Lhslowhl Aaohcdwvsg

Condition: excellent (used), machine/vehicle number: 4077953297009, Max. Punching and shearing capacity: 380 kN Lhjlhcdwsqlaifovsg Punches e.g. 30 mm holes in 10 mm steel Shears 300 mm to 12 mm steel on the flat steel shear

Condition: used, Year of construction: 1979, Functionality: unexamined, cutting range square at 90°: 55 mm, cutting range round at 90°: 63 mm, overall weight: 7,350 kg, Equipment: documentation/manual, emergency stop, type plate available, Peddinghaus Caddy 63 Bar Shear Year of manufacture: 1979 Overhaul: 1999 Shear force: 20,000 kN Cycle rate: 59/min Machine dimensions: 2260 x 2920 x 1770 mm Weight: 7350 kg Shears: Round bar up to Ø63 mm, square bar up to Ø55 mm (depending on the material to be sheared) Included: Bar feeder with separator Dimensions: 6800 x 1750 x 2250 mm Lolhcdwowbfn Nevohg Weight: 4900 kg The machine can currently be inspected while running. Delivery: ex works

Year of construction: 1992, Condition: good (used), machine/vehicle number: 454106, Technical data: min. / max. material thickness 3 - 25.0 mm max. helix length steel 400N/mm² 10 mm max. helix length steel 600N/mm² 8 mm max. helix length steel 800N/mm² 5 mm Working speed approx. 2.5 m/min Stroke rate 400 1/min Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Lhslhcofg Uvdjdwveg Weight approx. 13 kg

Condition: used, Year of construction: 2013, - Punching force 40 t Lelhcewd Hiaodwvshg - Punches up to 20 mm in diameter in 15 mm sheet or 30 mm in diameter in 10 mm sheet (for S235) - Throat 175 mm - Stroke 50 mm - Motor power 3 kW / 400 V - Weight approx. 580 kg

Condition: new, - Capacity 22 tons - Hydraulic - 3 stations - Foot control - Electric back gauge - Emergency stop - With 10 punches (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) - Peddinghaus punch holder - Documentation Lhjlhcdwehvr Ndsvog - 400V

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench Lholhskzk Hvocdwveg - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: excellent (used), Year of construction: 2003, The machine has very few working hours and has been in storage for many years) Performance: Hole diameter and thickness up to max.: approx. 28×13 mm Lelhcdeupzf Rewvjhg Angle steel 90 degrees up to max.: 80x80x8 mm Angle 100x 100 x 10 Flat steel up to max.: 300 x10/ 200×13 mm (See also rating plate in the appendix). Machine weight: approx. 750 kg Various punches are also included with the machine

Condition: used, Year of construction: 1974, Dear Sir or Madam ! Below we offer without engagement: Make : Peddinghaus Description : Sectional steel shears Type : Peddy Year of manufacture : 1974 Lhole N Uv Aehcdwveg Technical data : Cutting capacity 100 x 10 mm Round steel 25 mm Square steel 22 mm Weight 400 kg Further technical data on request! Please let us know if you are still interested in purchasing such a machine. If you are looking for other objects, or if you intend sales yourself, we also ask for your non-binding information. If you are interested, we would like to hear from you. With kind regards, signed. Andree

Condition: as good as new (ex-display), Year of construction: 2023, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Lhjlswa Sugehcdwveg Machine weight: 760 kg

Condition: new, Year of construction: 2023, Functionality: fully functional, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Lhjlhovf I Ibjcdwvog Multiple models available from stock.

Condition: excellent (used), MUBEA - BFL 350 / Section Steel Shear - For complete technical specifications, see data sheet Dimensions: LxWxH 1.2x0.8x1.8 meters / Weight: 1200 kg Lslhov Rg T Tocdwvehg Subject to errors / typos

Condition: used, punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm from a maintenance workshop New price ~ 13.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station Lslhcdevmidtowvjhg - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication * Machine link: ?machineno=1008-9412169

Condition: good (used), Year of construction: 1978, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: Lhjlohx Ekpjhcdwvog U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Lhjlsh Uhb Sehcdwvjg Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories