Used Isobaric Filler for sale (1,069)

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Bedpeziuazefx Adhslp Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: used, Year of construction: 1994, Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machine's controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12" touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data - Manufacturer: Ortmann + Herbst - Model: Hansa B 100/20 - Year of manufacture: 1994, completely refurbished 2013 - Machine type: rotary filler with screw capper, glass bottles - Filling valves: 100 - Capping heads: 20, for aluminium screw caps - Pitch: 115 mm - Capacity: up to 30,000 bph with 750 ml glass bottles - Control: Siemens S7 with SIMATIC MP377 12" touch panel (2013) - Change parts: two sets, for 250 ml and 750 ml bottles Equipment - New electrical system with Siemens S7 control and touch panel (2013) - New main bearing (2013) - New safety housing around the machine (2013) - Cap sorter with feed chute for aluminium screw caps - Two change part sets: 250 ml and 750 ml bottles Condition Bsdpfszu Iaxex Adhslp Used - refurbished. Built in 1994 and completely refurbished in 2013, including the electrical system, the main bearing and the safety guarding. Still installed and under power; the machine can be visited and inspected on site. Availability From 2 November 2026. Location: Germany. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited on request.

Condition: used, Year of construction: 2020, Overview  Bljdpfx Adjxnmv Eohep This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  - Capacity: - 2,000 cans/hour at 0.33 L - 1,500 cans/hour at 0.5 L - Compatible formats: Standard and Sleek cans (not suitable for Slim cans) - Filling system: Isobaric (for carbonated products) - Product types: Beer, cider, soft drinks, or similar beverages - Condition: Used – as new (only 1,500 cans filled)

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system Bedpfxszcu Sls Adhelp

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data - Filling system: Isobaric (for beer and other carbonated beverages) - Capacity: 900 bottles/hour - Bottle formats: 0.25 L – 1.0 L - Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Bedpsxn A R Esfx Adhslp - Electronic fill height adjustment - Stainless steel construction

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 2019 automatic inline monoblock filling and capping machine for 5 litre bottles, with 8 filling heads. Supplied with infeed and outfeed conveyors. Listed as Canellitech Srl 8-1. The manual identifies the manufacturer as Rizzolio Equipments S.r.l., model RLV 8-1. Technical specification: ✅ Manufacturer - Rizzolio Equipments S.r.l. (listed as Canellitech Srl). ✅ Model - RLV 8-1 (8 x filling heads). ✅ Year of manufacture - 2019. ✅ Set up for - 5 litre rectangular PET bottles with push caps. ✅ Fitted with 32mm diameter vent tubes and filling nozzles. ✅ Capping - push capping head. ✅ Speed - up to 500 bottles per hour nominal. The manual states actual output depends on the operator. ✅ Electrical - 380V / 50Hz / 3 phase + neutral, 24V controls, electro-pneumatic. Bljdpfeulpu Sox Adhjp ✅ Power - 1.0 kW max absorption, 2 kW installed. ✅ Weight - 400 kg. ✅ Dimensions - 2.7m L x 1.1m W x 2.45m H. Condition: , lightly used. Documents: EU Declaration of Conformity (Machinery Directive 2006/42/EC) included in the manual.

Condition: used, Year of construction: 2018, Overview This isobaric filler was manufactured in 2018 by the Italian company Rizzolio Equipment S.r.l.. The unit was originally purchased for starting a new carbonated water production project, but the project was never realized. The machine has never been used, is still wrapped, and remains in as-new condition. It is immediately available. Technical data - Capacity: 150–450 bph - Formats: 0.5 L and 1.0 L glass bottles with pilfer cap (adaptable with proper adjustments and heads) - Filling system: Isobaric - Filling heads: 2 - Power supply: 230 V, 50 Hz, single-phase, 2.0 kW - Construction: Stainless steel - Control options: Manual/automatic CO₂ purge & wash selector, vacuum pump control Bledpexa Apfofx Adhjp

Condition: used, Year of construction: 2018, Overview  Bedpfx Aeyb S S Hedhslp This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) - Capacity: 2,000 – 6,000 bph - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Condition: used, Year of construction: 2012, Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery - Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 - Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Bodpfx Aoz I Rfnjdhjlp Technical Data - Filler/Capper - Application: filling and closing of glass bottles - Filling system: volumetric filling - Filling valves: 60 - Capping heads: 12, plastic screw caps - Output: approx. 15,000 bottles/hour - Adjusted to bottle sizes: 0.75 l (Ø75 mm x 265 mm) and 0.33 l (Ø65 mm x 175 mm) - Control: Krones iPanel CD - Operating hours: 41,381 h (production counter 40,754 h) - Electrical supply: 400/230 V, AC 3/N/PE, 50 Hz, full load current 36 A - Construction: stainless steel and glass safety enclosure Technical Data - Labeller - Labelling: cold glue, 2 stations for front, back and neck labels - Output: 20,000 bottles/hour - Formats: 0.25 l Vichy, 0.5 l, 0.7 l and 0.75 l GDB and Schlegl bottles - Pitch circle diameter: 600 mm - Container plates without servo drive - Infeed and outfeed direction 90°, counter-clockwise rotation - Date coder installed on the machine - Glue pumps included - Operating hours: 36,000 h Condition Used, both machines in operation in a beverage production environment; labeller regularly maintained by the OEM. Availability Available from . Location: Germany.

Condition: used, Year of construction: 2020, Overview This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time.  Blsdpfsy Ttzuex Adhop Technical data - Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) - Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) - Application: Bottle filling - Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes - Bottle diameter: approx. 55 – 90 mm - Adjustment: Stepless adjustment of bottle diameter and height

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing Bodpfou I Hr Ujx Adhjlp - Siemens S7 control system with touch panel - Operating hours: 725 hours

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork Blodpsvy D Adefx Adhsp - Complete documentation available

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  - Type: Isobarometric filler for bottles and cans - Capacity: 8,000 bottles / hour (depending on format) - Number of filling valves: 20 Blsdst Rmhmjpfx Adhep - Formats:  - Bottles: 0.33 L Longneck and 0.75 L Cava - Cans: Standard 0.33 L and 0.44 L - Counter-pressure filler - Running direction: left - right - Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m - Operating History: - In operation: June 2021 – June 2024 - Last production run: June 2024 - Dismantled: February 2025 - Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) - Good condition, ready for reinstallation.

Condition: used, Year of construction: 2012, Overview Blsdpfxszcga Uo Adhjp This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h - Production Counter: 40,754 h - Control Interface: Krones iPanel CD - Electrical Supply: 400 / 230 V - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Technical data  Bljdpfeyudacsx Adhjp - Capacity: up to 1,600 cph (33 cl); output up to 650 L/h - Formats: 33 cl standard, 33 cl sleek, 50 cl standard - Application: Can filling - Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns - Lid format: CDL202 - Can diameter: 50 mm – 85 mm

Condition: used, Year of construction: 2004, Overview Isobarometric filler built in 2004 by the Italian manufacturer CIMEC, with 8 filling valves. The machine filled carbonated lemonade into glass bottles: 1,300 bottles/h in 33 cl and 750 bottles/h in 75 cl. Last production in 2022. The filler has been dismantled and is stored ready for shipment. Technical data - Year of manufacture: 2004 - Filling system: isobarometric (counter-pressure), 8 filling valves - Output: 1,300 bottles/h (33 cl), 750 bottles/h (75 cl) - Product: carbonated soft drinks (lemonade) - Containers: glass bottles, 330 ml and 750 ml - Electrical supply: 400 V / 50 Hz, 3 kW - Compressed air: 6 to 7 bar, max. 120 Nl/min - Dimensions: approx. 1,600 x 1,400 x 2,400 mm (L x W x H) - Control: push-button panel with text display Equipment - Stainless-steel frame with transparent safety guarding - Electrical cabinet - Enerfluid side-channel blower - Pall filter housings - Conveyor section Condition Dismantled and stored, ready for shipment. Inspection by appointment. Availability Available immediately. Location: France. Bedpfxo Afd Hto Adhslp

Condition: used, Year of construction: 2018, Overview Bledpfxevpi Abs Adhep The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  - Output: 4,000 bottles/hour (for 0.33-liter bottles) - Type of closure: 26 mm crown cork - Formats: 0.33L - Filling stations: 18 - Electrical specifications: - Max. Voltage: 208-240 V - Total current draw: 38.5 A - Maximum motor current: 10.6 A - Phase: 3-phase - Frequency: 60 Hz

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data - Capacity: - approx. 70 cans/min (500 ml) - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) Bsdpfxszbhi Is Adholp - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets

Condition: used, Year of construction: 2020, Overview    The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little.  Technical Details  Capacity: Up to 2.160 bottles per hour   Number of filling heads: 6   Last used formats: 0,33l Longneck   Possible bottle diameter: 5.3 cm - 7.6 cm  Dimensions (Floor): 1680 mm x 1070mm  Bjdor Hx Diopfx Adhslp

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers. Blodpfx Asyr Nr Sedhsp   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: used, Year of construction: 1991, Overview Bljdoz Eivyspfx Adhop H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately.

Condition: used, Year of construction: 2022, Overview  This dual isobaric counter-pressure filling line for bottles and cans was manufactured in 2022 by the Spanish company González Tratamiento. The system includes a Firulais 6 Latas-Botellas filler and MPC-AS self-adhesive labeller, offering a compact and flexible solution for small and medium-sized breweries or beverage producers. The filler is still in operation and was maintained regularly. The owner is selling it because the equipment exceeds their current production capacity. Technical data  - Capacity: Up to 2,000 bph (operated between 500–1,000 bph) - Filling System: Isobaric, counter-pressure - Filling Valves: 5 - Bottle Formats: 0.33 L and 0.75 L (adjustable) - Can Formats: Standard 0.33 L - Closure Systems: Integrated can seamer and crown capper - Construction: Stainless steel - Working Pressure: up to 3 bar - CO₂ System: Pre-evacuation for cans, vacuum for bottles Blsdpfx Aexn Uf Isdhsp - Controls: Touchscreen with adjustable parameters - Mobility: On wheels with adjustable legs - Condition: In use, regularly maintained Scope of Delivery  - Filler | González Tratamiento | Firulais 6 Latas-Botellas | 2022 | 5-valve isobaric filler with integrated can seamer and crown corker - Labeling machine | González Tratamiento | MPC-AS | 2022 | Self-adhesive labeler, wrap-around, for various bottle sizes, incl. thermal printer for compliance and expiry date marking  

Condition: used, Year of construction: 2016, Overview This GAI MLE 661 BIER is an isobarometric rinsing, filling and crown-capping monoblock for glass bottles, built in 2016 by GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) and put into production in 2018. The block combines rinsing, isobaric filling over 6 filling valves and crown capping in a single frame. It is set up for craft beer in 0.33 L, 0.5 L and 0.75 L glass bottles with crown caps in 26 mm and 29 mm. Cycle times, line speed and production counters are managed from the machine's touch panel. The machine is still installed and under power. Technical data - Manufacturer: GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) - Model: MLE 661 BIER (nameplate designation MLE661 BIER 003) - Year of manufacture: 2016 (in production since 2018) - Machine type: isobarometric rinser - filler - crown capper monoblock, glass bottles Bsdpszx Dt Nofx Adhelp - Filling valves: 6 - Capacity: up to 1,300 bph - Products: Beer and other carbonated beverages (isobarometric filling) - Bottle formats: 0.33 L / 0.5 L / 0.75 L glass - Crown caps: 26 mm and 29 mm - Control: touch panel with cycle-time, speed and production counters - Power supply: 6.38 kW - Air supply: 6 bar - Dimensions: approx. 480 x 130 x H 230 cm Equipment - Format parts for the listed bottle formats and both crown sizes - Spare parts Condition Used - in production, still installed and under power. Approx. 6,800 operating hours; in December 2025 the machine counter showed 5,982 operating hours and approx. 6.25 million bottles filled. Last maintenance December 2025. Availability From 27 November 2026. Location: Croatia. The machine can be visited in production on request.

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  - Capacity: 30,000 bph (all formats) - Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) - Filling valves: 96 - Capping heads: 18 - Closure type: Crown cork - Direction: Clockwise (L–R) - Diameter: 2,880 mm - Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout Bodexc H Tgopfx Adhslp - Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water - Control system: Siemens S7-300 PLC (2009 retrofit) Scope of Delivery  - Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system - Control system | Siemens | S7-300 | 2009 | PLC retrofit - Safety fences - Spare parts  

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour Bsdpfowiy Tvox Adhjlp - Formats: - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system