Used Jet Dc 900 for sale (63)

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop Ljdpjhf Na Ijfx Al Neac General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence Laodpfx Asy Nm H Asl Noc - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Lajdpfjnab Rlox Al Njc Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Lsdpfonab Rzex Al Neac Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads Laedonab Siepfx Al Noc - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Laodpfxsi Hckrs Al Nsc Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 480 h, workpiece length (max.): 3,715 mm, workpiece width (max.): 1,320 mm, workpiece height (max.): 180 mm, overall weight: 6,060 kg, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine has 270 operating hours, almost like new; features laser positioning. Technical data: Brand: Busellato JET Master T 4 Technical specifications: - Machining area: 3715x1320 mm (X,Y) - Workpiece height: 180 mm - Motor power: 9.5 kW - Max spindle speed: 24,000 rpm - C axis: available - Drilling unit: 19 spindles - 1 sawing unit - 16-position plate tool magazine - 3-part safety mat - Automatic central lubrication Vacuum pump capacity (m3/h): 244/286 Payment in euros or forints, price is net. Machine new price: €125,675. Sale price: €47,500 +36-30-9198-716 Lasdpfxexawlbj Al Nec

Condition: excellent (used), Year of construction: 2023, For sale is a JET drum sander 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and refurbished by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) - Sanding thickness: 0.8 – 102 mm - Infinitely variable feed rate: 0 – 3 m/min - With oscillation Laodpfsyzqtqex Al Noc - Drum speed: 1450 rpm - Suction connection Ø 100 mm - Motor power: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: JET 2244, drum sander, cylinder, oscillation, sanding machine Reference: R-L0B6O

Condition: new, Massive Cast Iron Legs for Lathe / Workbench – NEW & Extremely Sturdy For sale are 2 heavy-duty, high-quality cast iron legs, the perfect base for lathes, workbenches, or other machinery. The solid construction ensures maximum stability and minimal vibrations – ideal for precision work. With their robust cast design, these legs are virtually indestructible and suitable for professional use. Condition: Lajdpfx Aloyzd Ins Njc - New & in original packaging - Unused, including accessories (see photo) Technical data: - Weight: 31 kg per leg - Height: 80 cm - Width (bottom): 50 cm - Width (top): 25 cm - Thickness (bottom): 10 cm - Thickness (top): 15 cm Features: - Adjustable leveling feet included → perfect compensation on uneven floors - Threaded holes on top incl. mounting bolts - Sturdy, well-designed construction with bracing for extra rigidity - Highly adaptable: simply mount a wooden board or machine table if desired Ideal for: - Lathes - Heavy machinery - Workbench projects - DIY or industrial-style furniture Shipping / Collection: - Collection preferred - Shipping via freight forwarding available The legs are located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: cast feet, machine base, lathe stand, workbench legs, industrial feet, machine feet, cast frame, workbench subframe, heavy-duty supports, metal feet

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Laedpfx Aoyypmgel Nec

Condition: used, Small-format inkjet printer -Machine is sold as is, without testing, as a source of spare parts- Lsdpfx Aljcbmpue Neac "The proven products in the Videojet EXCEL family mark all surfaces continuously, non-contact, flexibly, and extremely reliably. Already, 200,000 Videojet systems are in use worldwide in production facilities, printing variable data daily! All printers in the EXCEL family have an RS-232/V24 data interface for integration into your production line. A sealed stainless steel housing protects against splashing water and corrosion (in accordance with industrial standard IP 65) and makes our EXCEL printers extremely resistant, even under the harshest production conditions. The backlit LCD display with clear lettering, available in many languages, is easy to read, even from a distance. The SUREPRINT software controls individual ink droplets, their flight characteristics, distances, and viscosity. It ensures a perfect print image through high user-friendliness."

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Lasdpfxsuix Sgs Al Nec Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General specifications: Lsdpshf Nakofx Al Njac ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically powered high-pressure machine for pressures ranging from 200 to 2500 bar and a flow rate of 21 to 240 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz - bar - l/min. Lsdpfx Aehga Rxel Noac CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 90 kW (60 Hz) Voltage: 400 V (50 Hz) - 440 V (60 Hz) Amperage: 81 A (50 Hz) - 108 A (60 Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. The lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others available upon request. Laodpfxohga S De Al Noc General specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high requirements for flow and pressure. The pump is driven by a 6-cylinder Volvo diesel engine. There are two versions of the engine, one with an exhaust system compliant with EU Stage V / US EPA Tier 4 final, and another with an exhaust system compliant with EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is made of corrosion-resistant material and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully integrated solution in trailers or containers. The CD700 can be equipped with a manual gearbox, allowing the pump to operate in several flow ranges and even enabling manual operation in the lowest gear. Similar to, but not a replacement for, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. pump speed: 522 rpm Drive engine: 6 Cyl. Volvo Diesel EU Stage V or EU Stage II Power of drive engine: 522 kW Speed of drive engine: 1800 rpm Diesel tank: 800 L Ledpfxshgblko Al Nsac Max. fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 is part of our series of high-pressure machines with an electric drive, designed for pressures ranging from 100 to 2000 bar and a flow rate of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal components and all-around side frames made of stainless steel. The front wheel and two large rear wheels, including a parking brake, ensure easy maneuverability and stable positioning. A lifting eye facilitates transportation. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: Lasdpfx Aehga Irol Nsc ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and other models, see data sheet and available upon request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The machines in the CD25 series are compact high-pressure cleaners, with pressures ranging from 170 to 500 bar and a flow rate of 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for long-lasting durability and corrosion resistance. The powder coating ensures a very attractive appearance. The machine has very compact dimensions of 1200mm x 800mm, which corresponds to the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eye. This enables very easy transport. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm Lodpfshgbfhjx Al Noac General specifications: ----- Max. pump speed: 1750 rpm Drive engine: Kubota Diesel 3 cyl., water-cooled Drive engine power: 18.6 kW Drive engine speed: 3000 rpm Tank: 28 L Max. fuel consumption: 5.7 L/h Noise level (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300 mm (350 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure range from 230 to 2000 bar with a flow rate of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. To ensure durability and corrosion resistance, the frame inside the trailer is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very appealing appearance. The frame can be easily pulled out for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, an electrically powered hose reel, a remote control, etc. However, it is similar to but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General specifications: ----- Max. pump speed: 1160 rpm Lajdjhgbkfjpfx Al Njc Drive engine: Toyota Diesel 4 Cyl. Water-cooled Drive engine power: 37.3 kW Drive engine speed: 1900 rpm Tank: 90 L Max. fuel consumption: 11.0 L/h Noise level (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. Lodpfxoxufbto Al Neac General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers a pressure range of 200 to 2800 bar and a flow rate of 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is made of hot-dip galvanized steel, which ensures long service life and corrosion resistance. For aesthetic appeal, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet at all four corners, as well as forklift pockets and lifting eyes at all four corners. The machine features a galvanized roof plate with a side bracket for protecting and storing, for example, high-pressure hoses. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 lpm CD200-250 250 bar 250 lpm CD200-1000 1000 bar 63 lpm CD200-1380 1380 bar 42 lpm CD200-2500 2500 bar 25 lpm CD200-2800 2800 bar 23 lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Ledpshgbhnjfx Al Neac Drive engine: 4-cylinder AGCO Stage V diesel (optional without ADD blue) Drive engine power: 149.1 kW Drive engine speed: 1950 rpm Tank: 135 L for skid and 200 L for trailer Max. fuel consumption: 18-20 l/h Dimensions and dry weight SKID: 2170mm x 1350mm x 1810 mm (1785 kg) Dimensions and dry weight TRAILER: 3800mm x 1900mm x 2000 mm (2500 kg) Includes standard accessories.

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD50 series of our high-pressure machines covers a pressure range of 230 to 2000 bar and a flow rate of 7 to 74 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosing frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine requires only a footprint of 1550 x 920 mm. Four rubber feet are mounted under the frame. In addition, the machine has forklift pockets and lifting eyes attached to all four corners. A galvanized roof plate provides protection and storage for high-pressure hoses, for example. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Ledpohgbf Eofx Al Noac Available models: ----- Model Pressure Flow Rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl., water-cooled Drive engine power: 37.3 kW Drive engine speed: 1800 rpm Tank: 90 L Max. fuel consumption: 10.0 L/h Noise level (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically powered high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure stable positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Lajdpfxjhga Sco Al Nec Available models: ----- 50 Hz - bar - l/min CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and other models, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 110 kW (60 Hz) Voltage: 400V (50 Hz) - 440V (60 Hz) Amperage: 160A (50 Hz) - 180A (60 Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications Laodpfsycc R Nex Al Noc - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs • Effective cutting area: 2,000 mm (gantry) x 1,000 mm Lasdpfxexvqvfe Al Nec • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Sale subject to prior sale.