Used Kappa 400 for sale (17,666)

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Lhjdoph Uk Nopfx Abvsd Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Ljdpfx Absin Et Njvohd Operation of the press can be manual, semi-automatic or fully automatic

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm Lodpfxehyc Nwo Abvohd f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. Lhjdpfx Abog Iihwjvod SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: good (used), Year of construction: 1980, grinding length: 400 mm, grinding width: 150 mm, Jumag surface grinding machine (Jung) Lodpfx Aetmtnasbvshd JM 400 Year of construction: 1980 Sanding length: 400 mm Sanding width: 150 mm Clamping area: 400 x 150 mm GR. Distance to table grinding spindle. 400 mm Grinding wheels: 200x 16 x 50.8 mm Table longitudinal feed hydr. variable Table cross feed manual/automatic. Grinding head electrically and manually height-adjustable electric quick adjustment 300 mm/min Sanding spindle motor: 1.5 KW - 2850 rpm Connection: 380V 50Hz 14A Weight: approx. 1000 kg Space requirement: approx. 2200 x 1500 x 1700 mm

Condition: excellent (used), Year of construction: 2004, Type Loedige TSHK-160/KGU-400 Lhjdpfxsvzzw Uo Abvjd Serial no. 3901 Year of manufacturing 2004 Hot mixer 210 liters Cooling mixer 391 liters

Condition: good (used), mileage: 633,936 km, power: 294 kW (399.73 HP), first registration: 03/2012, fuel type: diesel, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 700 l, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, Year of construction: 2012, = Additional options and accessories = - Tipping hydraulics - PTO = Further information = Lhjdpfjyrh I Ssx Abved Transmission: Opticruise, semi-automatic gearbox Number of cylinders: 6 Engine displacement: 12,740 cc Unladen weight: 7,690 kg Payload: 11,310 kg Gross vehicle weight: 19,000 kg Technical condition: good Contact Vitali Lenda for more information.

Condition: new, plate thickness 4 mm roll-body distance 260 mm throat 500 mm distance between roll centers 132 mm tool adaptor 40 mm speed 5 m/min total power requirement 2,2 kW Lhodpfxoyvvnce Abvjd weight of the machine ca. 350 kg dimensions of the machine ca. 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. Ledox Sdpyspfx Abvshd -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Condition: excellent (used), Year of construction: 2018, cutting height (max.): 400 mm, cutting width (max.): 400 mm, For sale here is a KLAEGER VBS 400S vertical band saw with an IDEAL BSS 016 welding unit. The machine has seen little use and is in good condition! It can be viewed and tested at our facility at any time while it is powered on. Manufacturer: KLAEGER Model: VBS 400S Year of manufacture: 2018 IDEAL welding unit type: BSS 016 (For welding saw bands) Saw band length: approx. 3600 mm Saw band width: approx. 4–20 mm Cutting width: approx. 400 mm Cutting height: approx. 400 mm Cutting speed: approx. 15–1000 m/min Table size: approx. 760 x 600 mm Drive power: approx. 4 kW Machine dimensions: approx. 2225 x 1120 x 770 mm Weight approx.: 500 kg Shipping costs within Germany: €180 Shipping available throughout Europe!! Viewing/pickup is possible by appointment in 42855 Remscheid. Lhjdpfx Ajyupw Hsbvsd You will receive an invoice with VAT shown. Sale from location 42855 Remscheid, ex works. Technical specifications subject to change.

Condition: used, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Iveco S-Way 400 4x2 Refrigerated Box with Tail Lift Ledpfxeywddzj Abvehd Axle configuration: 2 axles, rear-wheel drive, cab version "Active Day" with standard cab, engine: Cursor 9, 400 HP, Euro VIe, 12-speed HiTroniX automated transmission, permissible gross weight 18-20 t, single reduction drive axle, single axle, full air suspension, disc brakes, vehicle set-up ON, wheelbase 6,300 mm, CEE type plates, engine speed 2200 rpm, standard oil dipstick and oil filler neck on the transmission, engine plate, steel rims, standard reverse gears, speed limiter 90 km/h, manually operated cab tilting device, halogen headlights, black decorative film on doors, AD cab with flat roof, front underrun protection for chassis with gross weight over 7,490 kg, first aid kit, plastic bumper, black cab attachments, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, electronic immobilizer and second vehicle key, rear wall storage with 2 compartments, digital EC tachograph 4.1, static passenger seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, air suspension on front axle, COC full type approval, 2 wheel chocks, batteries mounted horizontally on the frame, standard air tank plates, alternator 2160 Watt (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate version, standard execution, chassis frame in grey, digital VIN code, APU pressure relief to atmosphere, standard total train braking system, steel air tanks (number depends on suspension and trailer version), standard applications, stabilizer front axle, exhaust pipe to the left, VIN manufacturer index ZCF, emission standard EURO VI E, rear underrun protection omitted, 290-liter aluminum fuel tank, 50-liter AdBlue tank, heated fuel pre-filter with separator, standard transmission mode, ECO-switch for switching from power to eco mode for optimized TCO via fuel-efficient engine and gearbox configuration, VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0, gearbox software ECO-Roll (freewheel function), driving style analysis (DSE), adaptive cruise control, lane departure warning system (LDWS), warning triangle as per ECE-27, standard taillights, electronic stability program (ESP), advanced emergency braking system (AEBS), DRIVE T. 315/70R22.5, mechanical roof hatch, fog lights including cornering/turning light, transparent sun visor mounted outside on cab roof, air horn behind bumper (compressed air), ashtray in center console, electrical pre-wiring for tail lift operation according to VEHH standard, front axle weight variant 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg), reinforced rear axle stabilizer bar D 60 mm, battery disconnect switch in the cab, electrically operable, 225 Ah batteries, no jack, 2-cylinder air compressor 630 cc, standard drive height, battery charging socket, terminals, rear axle ratio: i 3.08, trailer socket for 24V operation (15-pin), trailer hitch Ringfeder brand, trailer version for continuous brake system operation, rear cross member, D-value: 130 kN, trailer coupling, 40 mm, ...

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off - Automatic switch-off of the machine at Lhjdpjvkkl Tefx Abvjd open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1999, Diesinking / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 300 mm Ledpfsyq E Sxsx Abvshd table size X: 550 mm table size Y: 470 mm max. workpiece size X: 700 mm max. workpiece size Y: 500 mm max. workpiece size Z: 250 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 20 - time generator: 50 Ampere drop tank Control CNC control: Mitsubishi 32-bit EDM control

Condition: excellent (used), Thyristor controller with field regulator (28211) Make Unitek type 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight 11 kg Width 290 mm Depth 230 mm Height 225 mm Lsdpfx Abohhyy Revehd

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter Ledpfeynaz Nox Abvehd • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 Lhjdpfx Abed N H A Njvod feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Lsdpfx Abjd Rmcmsvjhd Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg Lhsdpfx Aoh Hvk Asbved good condition

Condition: used, mileage: 1,090,550 km, power: 294 kW (399.73 HP), first registration: 09/2008, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2008, Equipment: air conditioning, electric window regulation, Transmission: I-SHIFT, Automatic Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Lhedpfx Abewpuwieved Engine capacity: 12.780 cc GVW: 18.000 kg Make of engine: Volvo = Additional options and accessories = - PTO - Tipper hydraulics

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center. Machine Benefits Technical Machine Benefits • Rapid feed x-y-z 60 m/min Lhsdpoyi El Njfx Abvod • Table size 600 x 400 mm • Tool magazine 14 positions/ tool shank bt-30 accessories/chip conveyor

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. Lsdpfx Ajyg I Ihjbvjhd • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,361 h, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 410 mm, This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information. Ledpfx Abox Uzb Eovshd • Maximum workpiece weight: 800 kg • Tank length: 1195 mm • Tank width: 800 mm • Tank height: 400 mm

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits Lhedpsx D E Dyofx Abvsd • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 67,000 W, total height: 2,591 mm, total width: 2,199 mm, overall weight: 21,000 kg, product length (max.): 6,300 mm, tool weight: 5,000 g, swivel angle B-axis (max.): 360 °, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Ljdex D D Ecopfx Abvohd Main spindle 0102 direct driveMaximum material throughput: 102 mmMaximum speed: 3000 rpmFront bearing diameter: 170 mmVariable hollow shaft motorPower at main spindle D102:Power at 100/40% duty cycle: 53 kW/68 kWTorque: 675 Nm/900 NmWork spindle alignment and switching device D1022.5° increments via indexing discHydraulicly actuated hollow clamping cylinder D102 with analog clamping stroke monitoringMaterial clearance: 102 mmStroke: 48 mmMaximum clamping force (tension/compression): 10,900 dNMulti-clamping pressure deviceClamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. Chuck release movement required for transitioning to a lower clamping l carrier 1 (standard equipment)Cross slide X, Z, turning length 2000 h internal coolant supply and shut-off valve, ball screws D=40 mmin the X-axis, D=50 mm in the Z-axis. Axis drives protected by overload clutches, counterweight in the s X ZWorking travel mm: 320 2000Rapid traverse speed m/min: 20 40Feed force N: 14000 14000X-axis measuring system: Glass scale (absolute)Z-axis: ROQ encoder (absolute)X-Y-Z-B housing (WT1)Turret with AC motor, positioned by spur gears, hydraulically lockedY-axis quill, hydrostatically mounted, lockable via spur gearsBall screw, D=40 mmOverload clutchTravel: 220 mmRapid traverse speed: 12 m/minFeed force: 24,000 NROQ encoder (abs)B-axis drive with AC motorSwivel angle: 360°Tool drive unitwith two clutches:Maximum speed: 6,000 rpmPower (25%) at n= 6,000: 17 kWMaximum torque (25%): 37 NmDisc turret with 12 stations on cross slide 1Tool holder system DIN 69880-40x63Increased repeatability during tool changes due to additional W-slotsMultifunction unit on cross slide 1Maximum speed: 6,000/1,500 rpmGearbox: i=4Torque: 36/144 NmTools: SK50Front bearing diameter: 75 mmInternal coolant feedthrough, disc spring clampingTool carrier 2, right - X, ZTurning length 2000 mm, preferably oncounter spindle machine with internal coolant supply and shut-off valve, turret control via AG motor, ball screws D= 50 mm for Z-axis, D= 40 mm for X-axis. Axis drives protected by overload clutches, counterweight system in ret head oriented to the right towards the counter s X ZTravel mm 210 2000Rapid traverse speed m/min 20 40Feed force N 8600 14000X-axis measuring system: glass scale (abs)Z-axis: ROD encoder (abs)Disc turret with 10 on cross slide 2Tool holder system DIN 69880-40x63Increased repeatability during tool changes thanks to additional W-slotsPositioned by face gearing, hydraulically lockedCounter spindle D102, size 11-DIN 55026/55021 and ISO 702/1Turning length 2000 mmZ-axis slide driven by AC motor and 50 mm diameter ball screwAxis drive protected by overload clutchIn the working position, the slide is held against the stop by the AC motor.

Year of construction: 2015, condition: ready for operation (used), This Zoller smile 400 optical measurement machine was manufactured in 2015. It features a 24V power distribution system, a lighting module Z100-L, and a high-precision spindle SK 50 with a runout accuracy of 0.002 mm. It also includes a 17" panel PC, USB camera with integrated LED lighting, and a servo motor with encoder. Consider the opportunity to buy this Zoller smile 400 optical measurement machine. Contact us for more information. • 24V power distribution with fuses • USB motion controller • ZOLLER measuring instrument control • 11th generation 17" panel PC • Printer for TH labels • Printing width from 25 mm to 108 mm Lhodpfxjx Tkblo Abvsd • Membrane keypad for "smile2" with 3 buttons • High-precision spindle SK 50 • Runout accuracy 0.002 mm • Accessory kit for clamping unit "smile" • USB camera with optics and integrated LED incident light • Transmitted light "pilot" DLR / V-series • Servo motor with encoder and pinion • Software version: Pilot 1.14.18.0