Used Kappen Saw Metal for sale (39,831)

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension - Emergency stop - Documentation Pjdpfxovkkl Ts Ah Aegu - 400V

Condition: new, METALLKRAFT BMBS 300x320 HA-DG Semi Automatic Swing Frame Metal Band Saw Picture shows optional equipment Semi-automatic swing frame metal band saw for miter cuts from +60° to -45° with frequency converter For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Sawing functions hydraulically controlled Saw blade drive with low-maintenance, oil-lubricated worm gearbox With robust three-phase motor with overload protection Psdpfx Asfdgi Heh Aogu Bearing mounted rotary table After starting the cutting cycle, the vice clamps automatically - after the process is finished, the vice returns to the starting position (HA-DG) Saw arm inclined by 25°, thus longer service life of the saw band Swiveling saw arm from +60° to -45 With chip clearing brush for optimal cleaning and maintenance of the saw band With frequency converter: allows infinitely variable adjustment of the saw band speed from 20 - 100 m/min. BRP - saw band monitoring Hydraulic vice with manual quick clamp for lateral adjustment Limit switches control the upper and lower position of the saw arm No adjustment of the upper end point necessary Cut detection function with integrated pushbutton HM saw band guides Swiveling control panel Scope of delivery: Saw band Operating tool Length stop 1 meter Coolant pump Technical data: Length (product) approx. 2050mm width/depth (product) approx. 1170mm Height (product) approx. 2040mm Weight (net) approx. 650kg Power drive motor: 2,4kW Supply voltage: 400V Mains frequency: 50Hz Saw band speed(s): 20 - 100m/min Speed steps: infinitely variable saw band length: 3660mm saw band width: 27mm saw band thickness: 0,9mm Cutting range 0° round (tube): 300mm Cutting range 0° round (solid material): 300mm Cutting range 0° rectangular lying (hollow profile): 320 x 290mm Cutting range 0° bundle (tube): 320 x 160mm Cutting range -45° round (tube): 300mm Cutting range -45° round (solid material): 300mm Cutting range -45° rectangular lying (hollow section): 300 x 280mm Cutting range -60° round (tube): 200mm cutting range -60° round (solid material): 200mm Cutting range -60° rectangular lying (hollow profile): 190 x 200mm Cutting range +45° round (tube): 270mm Cutting range +45° round (solid material): 270mm Cutting range +45° rectangular lying (hollow profile): 270 x 200mm Table height material feed: 800mm

Condition: new, Vertical band saw machine Make: METALLKRAFT Model: VMBS 1610 Article no. 3951610 Condition: New machine cutting speed 20 - 1000 m/min Accessories: - Belt welding machine Pgedpshy Tcqefx Ah Asu with shear and grinding motor - machine light - 2-speed gearbox infinitely variable - chip blowing device - rip fence - instruction manual

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Item number supplier: 3951407 Saw blade speed: 20 - 80 m/min. Saw blade length: 2865 mm max. cutting height: 205 mm throat: 356 mm table width: 500 mm Working height: 990 mm Pgsdpfx Ajth Ugyoh Asu

Condition: used, Year of construction: 2023, functionality: fully functional, saw band length: 3,850 mm, saw band width: 27 mm, total height: 9 mm, cutting speed: 25 mm/min, power: 2.2 kW (2.99 HP), Karmetal DDG 300X340 ENC model band saw, manufactured in 2023, offers a powerful and precise cut for industrial use. It is a perfect assistant in the metalworking sector with its high efficiency engine power and adjustable cutting speed. ✅ Brand: Karmetal ✅ Model: DDG 300X340 ENC ✅ Year of Production: 2023 ✅ Cutting Speed: 25 – 90 m/min ✅ Main Engine Power: 2.2 kW Psdpfxov Hdu To Ah Aegu ✅ Hydraulic Motor: 0.37 kW – 1400 rpm ✅ Cooling Motor: 0.09 / 0.12 kW – 2800 rpm ✅ Blade Size: 3850x27x0.9 mm ✅ Main Voltage: 3x400V, 50-60 Hz

Condition: new, Year of construction: 2025, NEW MACHINE Please ask for delivery time! Item number supplier: 3951610 Saw blade speed: 20 - 80; 250 - 1000 m/min. saw blade length: 3140 mm max. cutting height: 255 mm throat: 396 mm table width: 600 mm Pgedstddz Hspfx Ah Asu Working height: 1000 mm

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Item number supplier: 3952013 Saw blade speed: 15 - 120; 190 - 1500 m/min. Saw blade length: 3950 mm max. cutting height: 330 mm throat: 503 mm Table width: 700 mm Pgedpeth Uh Usfx Ah Aou Working height: 990 mm

Year of construction: 1900, condition: good (used), Thickness of sanding paper 1,3 mm Width of sanding paper 41 mm Podst H Sm Tepfx Ah Asgu Length of sanding paper 6280 mm Sharpening pitch 6 mm a total of 19 units in stock

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Pedpfou R S Hpjx Ah Ajgu Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

Condition: new, Year of construction: 2025, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. Pgodpfxoiz S I Ho Ah Aeu The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pgjdpfxeg Hzxis Ah Asu Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: new, Year of construction: 2025, CORMAK HR500SA is an advanced automatic band saw designed for cutting solid materials, pipes and steel profiles with large cross-sections. Thanks to its two-column design and reinforced frame, the machine provides the highest stability, precision and repeatability of cutting - even in continuous operation. Technical data: automatic band saw HR500SA Pedpei Ab Dlsfx Ah Aegu Cutting range Ø500 mm or 650 x 500 mm Band dimensions 6600 x 41 x 1.3 mm Band speeds 27 / 45 / 69 m/min Total power 6.5 kW Band tensioning manual Feeder stroke 500 mm Table height 715 mm Load capacity 3000 kg Dimensions (L x W x H) 3200 x 3050 x 2115 mm Weight 3200 kg Standard equipment touch control panel with settings memory, automatic work cycle, top package pressure, hydraulic material feeding system, three-speed cutting gear, cooling system and cleaning brush, bimetallic cutting band, declaration of conformity CE, DTR instruction.

Condition: new, With the model ZIMMER Z125/R we offer a small and handy metal band saw for professional use: Infinitely variable speed regulation Saw arm swivels up to 60° to the right Band guide with 8 ball bearings Very smooth running Weight 19kg Inclusive 1 saw band (1.440 x 13 x 0,65) Pjdpfeg Im Syox Ah Ajgu Technical data: Motor power 230V / 1,0kW Cutting speed 30 - 80 m/min. Saw band dimensions 1.440 x 13 x 0,65 mm weight 19 kg Order number Z125/R Cutting data Round material Square Rectangle 0° 125 80 80 mm 45° right 125 x 125 80 x 80 50 x 50 mm 60° right 130 x 125 80 x 80 80 x 80 mm

Condition: new, Year of construction: 2025, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 Pedpfx Ahji D D A Sj Ajgu 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Optimum OPTIsaw SD 351 AV Semi-automatic double miter metal band saw With Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm Description: Heavy industrial design Quiet running Manual or semi-automatic operation Infinitely adjustable saw band speed from 0-80 m/min. High cutting accuracy thanks to vibration-free operation Miter adjustment up to 60° by swiveling the entire saw frame With high-quality bi-metal saw blade as standard End stops adjustable to the degree chip brush Pgsdpfx Ajdc H Ukjh Aou Micro switch for automatic limit switch Roller support adjustable for long and heavy workpieces coolant pump Ball-bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed using the feed control valve on the control panel Generously dimensioned, hydraulic quick-release vice, self-closing, adjustable for large cross-sections Fully equipped machine; The user can work productively immediately after commissioning EMC class C2 2-channel safety chain with emergency stop Converter Siemens Sinamics G110M Functionality semi-automatic operation Closing the vise and activating the motor Lowering the saw frame for cutting The motor stops and the saw arm returns to the starting position Technical specifications: Dimensions and weights: Length (product) approx.: 1935mm Width/depth (product) approx.: 1425mm Height (product) approx.: 1626mm Weight (net) approx.: 600kg Electrical data: Power drive motor: 2.2kW Connection voltage: 400V Mains frequency: 50Hz Engine power hydraulic pump: 1.4kW Engine power coolant pump: 50W Total connection value: 3.8kW Machine data: Saw band speed(s): 15 - 100m/min Speed levels: continuously adjustable Saw band length: 2925mm Saw band width: 27mm Saw band thickness: 0.9mm Cutting angle: -45 – +60° Manual operation: hydraulically via push button Semi-automatic operation: automatic Cutting areas: Cutting range 0° round (solid material): 270mm Cutting range 0° square (full material): 230mm Cutting range 0° standing rectangular (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (full material): 170mm Cutting range -45° standing (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (full material): 200mm Cutting range +45° standing rectangular (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (full material):140mm Cutting range +60° standing (solid material): 140 x 220mm

Condition: new, Year of construction: 2025, Semi-automatic CORMAK S440R band saw. Its arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm. Machine features Semi-automatic band saws, after being switched, do the whole cutting cycle automatically, i.e. clamp the cut material in the hydraulic vice, switch on the cutting band, lower the cutting arm (adjustable speed), stop the machine after cutting, raise the arm up (adjustable arm height) and switch the hydraulic vice off. Machine's arm is made of uniform cast iron and, together with a 34 mm wide cutting band, it enables cutting various profiles and shapes. The band saw uses a vice and a hydraulically raised and lowered arm. Technical data Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base from ground distance 780 mm Cutting band dimensions 5200×34×1.1 mm Total power 4.4 kW Band speed 20/90 m/min Dimensions (L×W×H) 2500×1900×1450 mm Weight 1100 kg Pjdsi Dx R Nepfx Ah Aegu Max. cutting range [mm] Angle 0º ø450 620×440 610×440 450×450 45º R ø440 500×190 360×440 420×420 45º L ø440 510×180 460×390 390×390 60º R ø330 330×170 170×440 300×300 60º L ø350 350×170 330×310 310×310 Standard equipment PLC controller Semi-automatic operating cycle Control console on a separate component Control panel with an LCD display Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Hydraulically controlled vice's jaws (long stroke cylinder with position memory) Cutting at angles of L/R 60o – 45o – 0o – 45o – 60o Digitally displayed set cutting angle Smooth band speed adjustability (inverter) Powered brush for cleaning the band Cooling system Bi-metal saw blade EC Declaration of Conformity User manual For more information please visit our web page or contact us.

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. Psdpfx Ahecgbq Ie Asgu For further technical data, please refer to the attached PDF document.

Condition: new, Year of construction: 2025, functionality: fully functional, CORMAK C33 column band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals. Technical data Type automatic column Arm raising and lowering hydraulic with smooth control Band speed 20–100 m/min Steady and feeding vice hydraulic Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting band 34×1.1×4115 mm Main motor power 4.4 kW Hydraulic unit power 1.5 kW Coolant fluid pump power 0.75 kW Dimensions (L×W×H) 2300×1780×1650 mm Weight 1900 kg Pjderh Epkspfx Ah Ajgu Max. cutting range Angle round square 0º ø300 300×400 Default equipment Automatic cycle operation Touchscreen LCD control panel Programming numbers and lengths of cut details Possibility of storing 5 various cutting macros Electronic display of band speed Arm position memory function Built-in hydraulic unit Vice position storage function Smooth cutting speed adjustment (motor with an inverter) Powered brush for cleaning the band Cooling system Bi-metal saw blade EC Declaration of Conformity User manual For more information visit our web page

Condition: new, Motor power 230V / 2,35 kW belt opening 230 mm belt dimensions 2085 x 20 x0,9 mm weight 195 kg Speed 30 - 75 m/min. Cutting area 0° 185 / 150 x 150 / 220 x 150 mm Cutting area 45° right 110 / 100 x 100 / 110 x 90 mm Cutting area 45° left Cutting area 60° right 70 / 70 x 70 / 70x70 mm Cutting surface 60° left Description Metal band saw with infinitely variable electronic speed regulation and automatic lowering. Selector switch for hydraulically controlled or manual band arm lowering. Saw arm can be tilted up to 60° right Quick-action vice Band guide with 8 ball bearings Hydraulic saw band tensioning with tensioning pressure display and band break switch-off Pgedpod Hzd Dofx Ah Asu Incl. coolant device Incl. machine base cabinet further information can be found on the attached pdf document - please ask for further versions

Condition: new, Year of construction: 2025, The CORMAK H - 280 SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø280 or 280 x 280 Band saw blade 3505 x 27 x 0.9mm Cut speeds 40/60/80 m/min. Engine 3kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder pitch 500mm Load capacity 1500 kg Dimensions 1750x1900x1550mm Weight 1100 kg Max. cutting range angle 0º ø280 280 × 280 Standard equipment work in automatic cycle arm position memory function Pgodpjiz S Nyefx Ah Asu built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, The ZIMMER Z151/R is a portable metal band saw for professional professional use for steel pipes in assembly. Technical data: Motor power 230V / 1,5kW Cutting speed 30 - 80 m/min. saw band dimensions 1.735 x 13 x 0,65 mm weight 37 kg Order number Z151/R Cutting data Round material Square Rectangle 0° 150 140 150 x 140 mm 45° right 100 90 100 x 90 mm 60° right 70 65 65 x 70 mm Pgedpfeg Im S Dsx Ah Aju

Condition: new, Year of construction: 2025, The CORMAK H-350SA column band saw is a high-performance machine for cutting solid workpieces and profiles in an automatic cycle. Robust body and sturdy saw frame in combination with the column structure ensure excellent rigidity and exceptional stability during cutting even the most difficult-to-cut metals. The cutting-off machine is equipped with PLC control and an easy-to-use touch screen. The undoubted advantage of Pedpfx Aswdunwoh Asgu The unquestionable advantage of this model is its swivel head which allows cutting in the following ranges 0°- 60° - in automatic cycle as well as semi-automatic - infinitely adjustable angle. angle adjustment. Manual and Automatic mode: The cutting-off machine allows both manual operations from the machine control panel in manual mode and an automatic cutting cycle in automatic mode, eliminating the need for constant operator assistance. Vise top pressure: The cutting machine is adapted to package cutting Automatic Cutting Cycle: In automatic mode, the entire cutting process, including clamping the workpiece, moving it to the specified dimension, lowering the cutting arm and raising it after the cut is completed, is carried out without operator intervention. Panel Controlled Parameters: Cutting parameters such as number of pieces, workpiece dimensions, belt speed, and more, are set and controlled via a control panel with an easy-to-use touchscreen. Robust Construction: The machine body is made of cast iron set on a rigid, space-age slab chassis structure for exceptional rigidity and stability. Cutting belt drive: A powerful three-speed motor, hydraulic belt tension and cooling system and cleaning brush contribute to precise and efficient cutting. Safety System: If the cutting belt breaks, the machine stops automatically, increasing operator safety. Hydraulic Material Feeding System: This system allows the machine to cycle fully automatically, with precise setting of the material feed length. Innovation and ISO Standards: Cormak provides innovative solutions and production in accordance with ISO:90001 and ISO:140001, which demonstrates the high quality, safety and reliability of the product. Technical data: Cutting range Ø350 or 350 x 350 Belt 4515 x 34 x 1.1 mm Cutting speeds 27/45/69 m/min. Total power 4.8kW Hydraulic power pack 0.75kW Coolant pump 0,04kW Belt tensioning hydraulic Feeder stroke 500 mm Load capacity 1500 kg Table height 700 mm Dimensions 2800 x 2200 x 1700 mm Weight 1500kg

Condition: excellent (used), PERTICI UNIVER 50 SEMI-AUTOMATIC MITRE SAW This machine is primarily designed for cutting aluminium and PVC profiles. Both mechanical and electrical safety features of the guards have been given special attention. During upward cutting, the operator is protected by the top cover as well as by the machined profile. The cutting angle can be manually set from 0 to 67.5 degrees, both left and right, by rotating the turntable. Seven fixed stops (67.5 - 60 - 45 - 0 - 45 - 60 - 67.5) enable cutting without adjustment. Other positions are set using a graduated rule. Motor: 5.5 HP Psdpfjxp Rx Tsx Ah Aogu Three-phase supply Blade diameter: 500 mm Cutting capacity at 90°: diameter 178 mm or 160 x 160 mm 1 carbide blade, diameter 500 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Blade lubrication.

Condition: excellent (used), Year of construction: 1990, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Vertical metal band saw Manufacturer: INTERKONT Model: Select SB-4 Year of manufacture: 1990 Condition: very good Offer type: used machine Technical data: Cutting height: 305/270 mm Throat: 405 mm Drive type: electric/mechanical Drive output: 0.75/1.1 kW Notes: Butt welding unit, Infinitely variable blade speed, Tilting saw table 500 x 500 mm Weight: 450 kg The machine is in very good and fully operational condition and can be inspected and demonstrated at any time at our premises. We would be pleased if our offer is of interest to you. Pgodpfx Ahjg Sm Igo Aju Subject to errors, changes and prior sale.

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Pgjdpfx Ahoxln Uke Asu Weight: 425 kg Required space: 900 x 800 x 1800 mm