Used Key Cutting Machine for sale (70,918)

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: foot remote control, Hydraulic punch and shear machine in good condition. Lasdpfx Absz S Izpo Njh

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W IPG air-water chiller for cooling Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with 200 µm optical fiber Weight: approx. 6.2 kg Lsdpfx Aozhtp Eob Neah Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Certification: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference no.: C2177 191026ä

Condition: good (used), Heidelberg OHT „windmill” Letterpress Ledpfx Abez N Sfaj Neah Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: used, functionality: limited functionality, machine/vehicle number: A-260605, input voltage: 400 V, overall weight: 500 kg, type of input current: three-phase, total length: 1,750 mm, total width: 1,300 mm, total height: 1,600 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, Equipment: compressor, Object A260605 Sinmag CT808 Cake Cutting Machine Semi-automatic cake cutting machine with 10 different cutting programs, designed exclusively for round cakes with a maximum diameter of 300–335 mm and a maximum height of 100 mm. Machine Specifications Total machine depth: 1.75 m Total machine width: 1.30 m Total machine height: 1.60 m Working height: 1.00 m Maximum cake diameter: 300–335 mm Maximum cake height: 100 mm Machine Capacity: Capacity is entirely dependent on the number of portions/slices to be cut. Electrical Information Power supply: 230 V, N + PE Power consumption: 1.0–1.15 kW Lsdpfjz Eui Sox Ab Neah Plug type: 2 × standard household plugs Compressed air required: Yes Minimum and Maximum Product Dimensions Product diameter: 100 to 335 mm Product height: 20 to 100 mm Operating Description – Sinmag CT808 Cake Cutter The Sinmag CT808 is a semi-automatic cake cutting machine designed for accurately dividing round cakes and pastry products into equal portions. The machine is controlled via a Siemens PLC control system with a touchscreen interface, allowing various cutting programs to be selected and adjusted. All settings are controlled through a Siemens touchscreen display, which also supports multiple language options. The machine is clad with polished chrome-finished stainless steel panels, providing a high-gloss appearance, and is mounted on four swivel castors with brakes for easy movement and secure positioning.

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 265020110084, Technical specifications available upon request. Laedpfx Aezd Hfxjb Noh

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used Fecken-Kirfel G1 band splitting machine, manufactured in 1986, for sale. Manufacturer: Fecken-Kirfel Machine type: G1 band splitting machine Model: G1 Year of manufacture: 1986 Condition: used Length: 4,500 mm Width: 1,200 mm Height: 1,400 mm Working width: 800 mm Weight: approx. 3.5 t The machine is being sold due to the purchase of a new machine and is in working order. Lasdpfx Aeztmybsb Neh If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Beam on time: 12,577 hours Laser on time: 68,745 hours including Sheetmaster Lajdpfxjznir Ao Ab Noh

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Lasdpfx Abezb Akte Neh The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 38,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: L69, laser hours: 26,400 h, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 4,000 mm, working width: 2,000 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale is a TRUMPF TruLaser 5040 Fiber L69, manufactured in 2014, equipped with a 5 kW TruDisk laser. The machine has a processing area of 4,000 × 2,000 mm and is currently powered on. An inspection with a functional demonstration is possible by arrangement. Technical specifications: Model: TruLaser 5040 Fiber L69 Year of manufacture: 2014 Laser source: TruDisk 5001, 5 kW Processing area: 4,000 × 2,000 mm Control system: Siemens Sinumerik 840D SL Equipment according to machine documentation: BrightLine Fiber and CoolLine Cutting packages for copper and brass ContourLine, FastLine, FlyLine, and AdjustLine Automatic nozzle cleaning Laodsz D U Nispfx Ab Nsh Camera for process monitoring Electric retractable roof and multi-chamber extraction system Wireless Operation Point and teleservice The machine is particularly suitable for companies that want to combine a large sheet metal format with the material flexibility of a fiber laser. Price: €90,000 (negotiable), net, ex works Leopoldshöhe. Inspection and further technical documentation available upon request. Disassembly, loading, and transport are to be arranged by the buyer and are not included in the price. Please include your company name and telephone number in your inquiry.

Condition: new, STRUERS Metallographic Cutting Machine Struers Magnutom-5000 XYZR NEW / unused – Year of manufacture 2025 Automatic X-table with rotation and accessories New, unused metallographic cutting machine for the automatic cutting of large material samples. Not assembled or put into operation; stored in shipping condition. Technical data: Manufacturer: Struers Type: Magnutom-5000 XYZR Article number: Year of manufacture: 2025 Design: 4 axes with X-table and rotation Electrical data: Mains connection: 3 × 380–480 V / 50–60 Hz Motor power S1: 11 kW Motor power S3: 16 kW Rated current: 34 A Maximum current: 48 A Maximum load current: 31 A Cutting wheel – manufacturer’s specifications: Maximum diameter: 508 mm (20 inches) Cutting wheel thickness: 3.5 mm Inner hole diameter: 32 mm Speed range: 1,000–2,400 rpm Cutting capacity according to the manufacturer: Laedpfxjz Tfl Ij Ab Nsh Maximum diameter: 190 mm Other cutting ranges: 190 × 254 mm 184 × 400 mm 114 × 618 mm Depending on the workpiece and cutting process Cutting table and axes: Automatic X-table: 524 × 781 mm (W × D, max.) X-axis travel: 370 mm Rotary table: Ø 533 mm T-slots: 12 mm Cutting wheel positioning range Y: 395 mm Cutting wheel positioning range Z: 214 mm Dimensions and weight: Width: 1,758 mm Depth: 1,463 mm Height: 1,882 mm Weight according to nameplate: 2,510 kg Dimensions according to manufacturer’s brochure Cutting chamber – manufacturer’s specifications: Width: 1,000 mm Depth: 1,206 mm Height: 918 mm Equipment and functions: Automatic X-table with rotation Variable cutting wheel speed Direct drive AxioCut and OptiFeed AxioWash – automatic cleaning program Laser for cut positioning Cutting wheel monitoring Programmable cutting sequences and simulation Automatic XYZR movements Areas of application: Metallography, materials testing, sample preparation, Quality assurance, research and industry Scope of delivery according to parts list and original photos: 1 × Struers Magnutom-5000 XYZR – Art.-No. × Coolimat-2000 band filter – Art.-No. × Water level indicator – Art.-No. × COLMF magnetic filter – Art.-No. × Signal lamp – Art.-No. × Collection tray 4,080 × 2,000 × 50 × 3 mm – DE-730200 1 × Service kit Magnutom-5000 – Art.-No. 16582999 Additional accessories according to documented delivery condition. Notes on cooling and commissioning: Coolimat-2000 band filter included according to the parts list. Circulating cooling unit and clamping tools for 12 mm T-slots must be ordered separately according to the sales documentation. Check the scope of the cooling system before commissioning. Condition: NEW / unused, year of manufacture 2025 Not assembled or put into operation Main unit securely packaged for transport Accessories partially in original packaging Original purchase price (net): €140,744.00 Assembly and commissioning are not part of the offer and must be arranged by the buyer. Weight: 3100 kg Shipping by freight forwarder possible upon agreement. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, 1 used cutting and punching machine Manufacturer: BOGRAMA AG, Switzerland Type: BSM 450/220/15/Plus Year of manufacture: 2006 Machine No.: 232/06 Technical data / Equipment: - Cutting and punching machine - Working width up to approx. 450 mm Lodpfxoz I Uf Se Ab Njah - Product width up to approx. 220 mm - For cutting, punching and perforating - Punching thickness with Servo-Plus version up to max. 4 mm - Pneumatic connection: max. 6 bar - Robust design for professional use in post-press processing The technical specifications are based on the BOGRAMA data for this machine series; individual values may vary depending on the equipment of the specific machine.

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Lajdpfx Abjyk Dgzo Noh Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2003, Model: Bystar 3015 ByLaser 4400 Year of manufacture: 2003 Operating hours (turbo): 0 hours, general overhaul CNC control: Byvision P8009, Windows XP Bystronic programming software Computer replaced in 2020 Working area: 3,000 x 1,500 mm Travel range: x: 3,048 mm, y: 1,524 mm, z: 70 mm Laedpfx Aj Aaygrjb Nsh Maximum sheet thickness (steel): 25 mm Laser: Bystar ByLaser 4400, laser power: 4,400 W, turbo unit general overhaul Tube cutting device Gearbox, cooling system, extraction system, valve block for gases Machine weight: approx. 12,500 kg Dimensions (length x width x height): 10,150 x 6,500 x 2,450 mm A mirror revision was carried out, all glass tubes were replaced; the machine was also completely cleaned and inspected.

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 Lasdpfxozmitko Ab Njh feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Lsdpfx Aoz N Sd Neb Neah Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: used, functionality: fully functional, Year of construction: 2007, control type: CNC control, For sale: CO₂ Tube Laser BLM Group Adige LT712D The machine is fully operational and in daily use in production. Inspection and testing on site are possible. The laser source ROFIN RF tube DC025 has been replaced with a new one. The new source has only 2386 operating hours. Specifications: Lajdpfey R Tt Ssx Ab Njh Model: BLM Adige LT712D CO₂ tube laser Year of manufacture: 2007 Laser source: Rofin RF tube DC025 New laser source operating hours: 2386 h Total machine operating hours: 89186 h Automatic tube loading and unloading CNC control Autofocus cutting head Suitable for cutting round, square, and rectangular profiles Automatic profile centering and measurement devices Professional industrial construction Scope of supply: Rofin DC-K laser integration AK-HP 591-LT712 cutting head 5” focusing system 6500 mm tube system Automatic unloading module The machine is suitable for the production of metal constructions, furniture, automotive, tubular structures, and other metal products. If you have any further questions, we will be happy to answer them.

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA LC-2415 ALPHA IV NT 2.5 kW Specification Details Manufacturer: AMADA Model: LC-2415 ALPHA IV NT Year of Manufacture: 2006 Condition: Used Machine Type: CNC CO₂ Laser Cutting Machine Laser Power: 2.5 kW Laser Type: CO₂ laser Laser Oscillator: FANUC AF2000i-C / AF2000E-LU2.5 CNC Control: AMNC-F / FANUC Total Operating Hours: 25,729 h Working Range – X Axis: 2,520 mm Working Range – Y Axis: 1,550 mm Working Range – Z Axis: 300 mm Maximum Processing Dimensions: 5,040 × 1,550 mm with one repositioning Maximum Table Load: 330 kg Maximum Cutting Speed: 20 m/min Maximum Positioning Speed – X/Y: 80 m/min Maximum Positioning Speed – Z: 60 m/min Ledpfxo Abrlps Ab Njah Positioning Accuracy: ±0.01 mm / 500 mm Repeat Positioning Accuracy: ±0.005 mm Maximum Sheet Thickness – Mild Steel: Up to 12 mm* Maximum Sheet Thickness – Stainless Steel: Up to 6 mm* Maximum Sheet Thickness – Aluminium: Up to 6 mm* Drive System: AC servo motors Number of Controlled Axes: 3 (X, Y, Z) Laser Wavelength: 10.6 μm Laser Beam Mode: TEM₀₀ equivalent Beam Divergence: < 2 mrad Laser Stability: ±1% Cutting Speed: 0–20 m/min Assist Gas Connections: 3 Automatic Gas Pressure Control: Yes Automatic Focus Adjustment: Yes Automatic Sheet Repositioning: Yes Automatic Sheet Loading/Unloading: Depending on configuration Cutting Head: HS-2003 Adaptive Optics: ActiveCut High-Pressure Cutting System: CleanCut Specification Details Aluminium Cutting System: ALUCUT Extraction System: Included / depending on configuration Cooling Unit: Included Power Supply: 400 V / 50 Hz / 3-phase Compressed Air Requirement: Approx. 250 l/min at 6 bar Machine Length: 5,745 mm Machine Width: 2,630 mm Machine Height: Approx. 2,150–2,275 mm* Machine Weight: Approx. 7,500 kg Laser Class: Class 1 during intended operation * - The actual maximum sheet thickness that can be processed depends on the material, its quality and processing conditions.

Condition: new, functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, laser type: fiber laser, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, # Eckert Diamond Tube Laser – CNC Tube Laser Cutting Machine for Tubes and Profiles The Diamond Tube Laser from Eckert Cutting is a CNC laser tube cutting machine for the precise machining of tubes and profiles. It is suitable for companies in the metalworking, steel construction, and mechanical engineering industries that want to cut tubes and profiles efficiently and with high repeatability. ## Tube Diameters and Profile Shapes The Diamond Tube series processes round tubes with a minimum diameter of 20 mm. The maximum tube diameter is 240 mm, 360 mm, or 540 mm, depending on the model. In addition to round tubes, square tubes, rectangular tubes, oval and elliptical tubes, as well as various special profiles can be machined. Open profiles such as L-, C-, I- and H-profiles also fall within the range of applications. ## Stable Tube Clamping for Precise Laser Cuts The robust gantry design with an inclined rack and pinion drive ensures high rigidity and stable machine movements. A pneumatic clamping system, CNC-controlled self-centering, and a floating tube support assist in the secure fixing of the workpieces – even with long tubes and profiles. The 360° machining capability enables flexible cutting contours for demanding components and structures. ## Optional Chamfer Cutting up to 45° With an optional 4-, 5- or 6-axis cutting head, the Diamond Tube Laser enables chamfer and bevel cuts up to 45°. This allows tubes and profiles to be specifically prepared for welding joints and complex assemblies. ## Automation for Series Production Laedpfx Absf Ak Swe Njh An optional automatic loading system supports continuous material feed and reduces manual effort. This makes the tube laser cutting machine suitable for both flexible production tasks and series production. The Eckert Diamond Tube Laser combines precise laser cutting with versatile profile machining and optional automation – for efficient manufacturing processes in industrial metalworking.

Condition: used, Year of construction: 2012, Plasma power source for plasma cutting system Manufacturer: Kjellberg Type: HiFocus 440i Year of manufacture: 2012 Automatic gas control unit Includes cooling unit KWE360 Includes hose package with torch and cable Laodpfsz Ipnujx Ab Nsh 191026ä

Condition: used, Year of construction: 1984, Technical details: x-travel: 400 mm y-travel: 100 mm z-travel: 100 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: 0,8 kW machine weight approx.: 132 kg space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V * Lsdpfxju Nc Nxs Ab Njah

Condition: good (used), functionality: fully functional, For sale: a Liftmaster for handling GF 1500x3000m sheet sizes. The machine is in storage and available immediately. Ledpfxez Hvkye Ab Njah

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Lodpfey Urziox Ab Noah Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: good (used), Gear Hobbing Machine Strausak 30 Workpiece diameter for manual loading: Ø 35 mm Workpiece diameter for magazine loading: Ø 15 mm Workpiece diameter for fully automatic loading: Ø 10–12 mm Maximum hobbing length: 12 mm Plunge feed at 42% of longitudinal feed: 22 mm Plunge feed at 25% of longitudinal feed: 14 mm Module in steel max.: 1.0 mm Module in non-ferrous metals max.: Solid material ø26 / ø35 mm Selectable number of teeth: 5–390 Lajdpfox Dxu Ssx Ab Nsh Cutter speeds: 1160–8550 rpm Plunge feeds per workpiece revolution: 0.0325–0.273 mm Longitudinal feeds per workpiece revolution: 0.033–0.65 mm Cutter diameter: 8–24 mm Machine weight: 600 kg Main motor: 0.8 HP at 3000 rpm Hydraulic motor: 0.25 HP at 1500 rpm Coolant motor: 0.25 HP at 1500 rpm No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting and processing center (ZBZ) from Rotox, manufactured in 2007. The line is designed in a "Z" shape. Lodjz Huuqspfx Ab Noah An reinforcing bridge is located between the cutting center and the processing center. Available for immediate delivery.

Condition: used, Uchida BC 10 Business Card Cutter The UCHIDA BC-10 business card cutter is a business card cutting machine that works in conjunction with any high-quality digital copier or printer to automatically, easily, and quickly produce professionally cut business cards. Whether you are a small business or a large corporation that produces hundreds of cards per day, the innovative features applied to the UCHIDA BC-10 will meet every need. • Designed exclusively for business cards from A4 paper • Up to 100 business cards per minute • Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type: Offset, coated, glossy paper Tolerance: ±0.1 mm Item condition: used Laodpfxjivd Aij Ab Nsh Scope of delivery: as shown (without sheet feeder & trash box) You can find more items – new and used – in our shop! International shipping costs available upon request!