Used Kf 4000 for sale (3,066)

Condition: good (used), Year of construction: 1986, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with weighing unit and trolley, each without control, and weighing display -Load capacity: 2000 kg -Platform: 4000 x 1420 mm -Dimensions retracted: height 430/675 mm Isdow Hyfmopfx Addsht -Extended dimensions: height 1145/1390 mm -Rolling chassis: roller spacing for rail 1100 mm -Transport dimensions: 1420/4000/H675 mm -Weight: 2600 kg

Condition: used, fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece Ihedou Scqbspfx Addjt -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: used, Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit -Festo type: DSL-32-50-270-P-S2-CC-KF -Piston: Ø 32 mm -Stroke: 50 mm -Swivel angle: 0 to 272° Iodpfed S Dahjx Addsht -Max. Pressure: 8 bar -Dimensions: 335/105/H105 mm -Weight: 3.7 kg

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder, guide unit -Manufacturer: Festo, guide unit -Type: FEN-50-0250-KF -Stroke: 250 mm -Bore: for piston Ø 40 mm -Price: per piece Iedpfxjfxbg Ro Addsht -Number: 1 piece -Dimensions: 437/135/H70 mm -Weight: 4.7 kg/piece

Condition: used, Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump Iodpfxsd Tvuqj Addjht -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Condition: ready for operation (used), Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year R 2024 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg Ihjdpsx Tthuofx Addst

Condition: used, Year of construction: 2024, Applicable material: Manure Ihedpfx Adjx S Uf Sodjt

Condition: used, Manufacturer : Vatron MAU Ijdpsx Rz Nhjfx Addeht Agitation: Rayneri Typhoon impeller diameter Ø400 / 3 kw / 323 rpm - Polished stainless steel, thickness 6 mm - Diameter. 2000 mm - Double insulation jacket 30 mm / stainless steel sheet 3 mm - Washing turbine - AC & vacuum connections

Year of construction: 2021, condition: new, functionality: fully functional, 320x = 1 pallet € 1,900 Ihedpfx Astzwynsddst Brand: NN Year of manufacture: 2021, new/unused Dimensions LxWxH (mm): 10,000 length (4,000 kg) Quantity in stock: 320

Condition: used, mileage: 151,000 km, power: 228 kW (309.99 HP), first registration: 01/2014, fuel type: diesel, axle configuration: 6x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2014, Refuse Collection Vehicle PUSHER 4000 – Air conditioning – Camera – 3 seats – Steering axle – Gross weight 26,000 kg – Unladen weight 14,815 kg – Wheelbase 4,200 mm = Further Information = Front axle: Steered; Suspension: Leaf spring Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Unladen weight: 14,815 kg Payload: 11,185 kg Gross vehicle weight: 26,000 kg Reference number: 96 Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Ihedpfx Adsx S E Azedot

Year of construction: 2022, condition: new, bearing diameter 120 mm motor Synchronmotor Ihsdpfoua Ituox Addst Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Torque 76,4 Nm current 38 A Unused grinding spindle for Höfler Rapid 1250

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Ihodpox Sttujfx Addjt Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm Ihjdpfjwwlt Rjx Addet spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: used, Year of construction: 2018, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, Used DMG Mori NHX 4000 CNC Horizontal Machining Centre, 2018, s/n NHX41180108, Celos M730UM Control, Travels X-560mm, Y-560mm, Z-660mm, Pallet 400 x 400mm, Maximum workpiece swing 630mm dia, full 4th axis 0.001 degree, 15,000RPM spindle Speed, BT40 taper tooling, 60 station ATC, Through spindle coolant system interface, Coolant gun, In machine measuring system (table) touch sensor (metrol) + tool setter function, High pressure 70 bar coolant unit, Knoll interface conversion to suit high pressure 70 bar coolant unit, Transformer. Machine uptime 41,042 hrs, Program runtime 30,261hrs Iodpfx Asx Nhpxjddsht

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, Iodpsxp Hhdsfx Addeht swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION Iodpfsvwgm Hex Addsht In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 285 A, welding current at 100% duty cycle: 270 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Kemppi MasterTig MLS 4000 with 3 Months Warranty Steel – Stainless Steel Weldable Refurbished – Serviced – Tested 5-400 AMP 30% ED: 400A Iedjx Ryxnspfx Addjht 60% ED: 285A 100% ED: 270A 400 Volt Gas-cooled 2/4 Step Pre gas Post gas Up slope Down slope Stick option Including: 8 Meter Welding torch Earth work lead with clamp Gas hose Trolley Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2013, The Duplo Bookletmaker System 5000/4000 is a sophisticated and highly efficient finishing solution, designed to streamline booklet production with precision and reliability. Manufactured in 2013 and currently operational in a German printshop, this system is built to handle sheets up to 350 x 500 mm, making it ideal for a wide range of booklet and brochure formats. Isdpfx Aoxphybsddjht The system is comprised of two Collorator towers, each featuring 10 compartments (DBM 4000), ensuring smooth and organized sheet collation. It also includes a delivery/offset stacker (DBM 4000) for neat output stacking, and a stitching and folding unit (DBM 5000) for professional booklet assembly. A dedicated pressing plant (DBM 5000) guarantees crisp, flat results, while the integrated trimmer (DBM 5000)???equipped with new blades and updated controls???delivers clean, precise cuts every time. Enhancing operational flexibility, the system features an adjustable kicker/display for customizable interval settings. The DBM 4000 components were built in 2007, while the DBM 5000 units were added in 2013. With each tower boasting 4 million cycles and the trimmer at 2.5 million, this system has proven its durability and performance. Regular maintenance by FKS Hamburg ensures the machine remains in top working condition, ready to meet the demands of high-volume production environments. Format: 350 x 500 mm Equipment: 2 Collorator towers with 10 compartments DBM 4000 1 piece delivery/offset delivery Stacker DBM 4000 1 piece stitching and folding unit DBM 5000 Duplo 1 piece pressing plant DBM 5000 Duplo 1 x Trimmer DBM 5000 Duplo (New blades/new control) 1 piece Kicker/display adjustable the interwalle D System DBM 4000 built in 2007, System 5000 built i Towers 4 million each, trimmers 2.5 million Maintenance by FKS Hamburg

Condition: excellent (used), Year of construction: 2012, Accessories included. CNC Control: Fanuc-18i-MB Working area X travel: 350 mm Z travel: 1600 mm C travel: 360° Swing diameter over bed: Ø 940 mm Max. standard turning diameter: Ø 366 mm (10-position standard turret) Maximum turning diameter: Ø 550 mm Maximum turning length: 1580 mm Spindle speed: 20 - 2000 rpm Chuck size: 15"/18" Spindle nose: A2-11 Spindle bore: Ø 130 mm Dimensions (LxWxH): mm Iodpfsv Awlkjx Addoht Machine weight: 11,000 kg

Condition: used, Year of construction: 2019, Technical details: voltage: U1: 400V V open-circuit voltage: 70 V weight of the machine approx.: 100 / Gerät kg dimensions of machine: ca. 0,85 x 0,37 x 1,25 pro Gerät m 4 Fronius TransPuls welding systems available Can be used for industrial applications, e.g. robots. Areas of application: Welding process “CMT”, for all MIG/MAG welding work mobile, 4 wheels / 2x of which swivel with wire feed type: VR 7000-CMT: Wire feed speed 0.5 - 22 m/min; use of possible wire Ø 0.8 - 1.2 mm RCU5000i univoSD remote control 1 meter intermediate hose package Trolley Isdpfx Asu Nwhieddjht Protection class IP 23 AF cooling type Operation via display RCU 5000i i.D. *

Condition: used, functionality: fully functional, Year of construction: 1985, Capacity: 4000 x 13 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Iodpfx Aex Rx Stsddeht Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1985 Country of origin: Denmark. Size (L x W x H): 4600 x 2300 x 2400 mm. Weight: 20 ton. With 2500 mm. squaring arm and support arm. All our machines will be tested and serviced before delivery.

Condition: used, functionality: fully functional, Copy router - 3.7 kW Ihodpfxox Rczlo Addet

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm bar lenght min. 1000mm / max. 4200mm Ihjdpfx Aoi Dagcsddot

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Iedpfsyarw Hsx Addeht Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 22070ULS, total height: 2,500 mm, total length: 2,500 mm, overall weight: 850 kg, input voltage: 400 V, compressed air connection: 6 bar, pressure: 6 bar, Equipment: documentation/manual, Scaligera Ulisse 4000 Sleeve Machine 2023, as good as new The Scaligera Ulisse 4000 is an automatic sleeve applicator for applying shrink sleeves to bottles and packaging. The machine places pre-formed sleeves over products, after which they are guided through a shrink tunnel for the final shrinking process. Key features: Ihsdpfx Aexw Uznoddst - Suitable for various product sizes (bottles, jars, tubes) - Automatic product feeding and sleeve application - Adjustable capacity depending on the type of product - Mechanical format adjustment for different product dimensions - Integrated shrink tunnel with temperature control Operating principle: Products are supplied via the conveyor belt, after which the machine automatically applies a sleeve over each product. The product then passes through the heating tunnel, where the sleeve shrinks under heat and conforms to the shape of the product. Shrink tunnel: The corresponding shrink tunnel is an essential part of the system and ensures the final shrinking process. The tunnel is equipped with: - Adjustable temperature zones for optimal shrinking results - Hot air circulation for even heat distribution - Adjustable belt speed for different sleeve materials (PVC, PET, OPS) - Heating elements with digital temperature control - Variable tunnel length depending on the configuration The shrink tunnel can be adjusted for various sleeve materials and product shapes, with precise temperature and dwell time settings to achieve a perfect shrink result without damaging the product. Applications: Ideal for cosmetics, food, pharmaceutical products, and other packaging where a 360° sleeve label is desired. This description is for informational purposes only. No rights can be derived from this information.