6
Output: 10-12m³/h, length: 3000mm, width: 3500mm, height: 1980mm, weight: 8t, including blender, mud pump, slurrry pump and circulating pump.
Pwnjf
15
Description: Stainless steel pressure belt filter for the treatment of cooling lubricants or drilling and grinding emulsions in the machine tool industry or in the waste water sector for the filtration of waste water.
Functional description:
The pressure belt filter consists of two chambers. The upper chamber can be opened via a cylinder
upper chamber can be opened. The chambers are sealed against each other by a seal attached to the upper chamber.
upper chamber.
Bpizpw0cxj
The medium is convey...
5
* General * SKU243S152 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
By0afxaec2
13
Used Seitz Type 60B80 stainless steel filter press. Has (83) plates and (2) end filter plates. Plates measure approximately 600mm x 600mm giving approximate filter area of 60 sqmt. Unit has hydraulically operated open/close. Unit is immediately available for sale from our North East, UK warehouse.
Caeugq78lt
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable ti...
10
Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press
Pqil3uzf
-Manufacturer: Simex, chamber filter press type SPK 47
-Model: 15/20 15 panels
-working dr. maximum: 10 bars
-closing dr. max. 350 bar
-Hydraulic Cylinder: Stroke: 140mm
-Dimensions: 2060/830/H1600 mm
-Weight: 707 kg
Discover more used machines
1
Plate size 470 mm.
During the process, a filter cake builds up from retained solids, which increasingly takes over the filter effect of the filter cloth. Thus, the initial surface filtration becomes a cake filtration with depth effect.
In the "classic" chamber filter presses, the entire filtration cycle is run via the feed pump (Max 12 bar, not included in the scope of delivery). It starts with a high flow rate at low back pressure. As a result of the filter cake building up (max. 84 liters), th...
15
Design: NETZSCH Chamber Filter Press with motorized hydraulics, automatic plate transport, hydraulic power unit, open filtrate outlet, trough, drip tray and filter cake funnel. Press tested with 350 bar WITHOUT CONTROL.
Accessories:
Hydraulic cylinder (used)
Bdtou2d7il
Hydaulic aggregate (as good as new)
Type: Side rail filter press with top mounted plate transport
Manufacturer: Netzsch
Year of construction: 1983
Documentation: no
Viewing: yes
Storage location: Warehouse Warburg
Status: u...
7
We have two identical filter presses for sale.
Name: Chamber Filter Press
Manufacturer: Passavant
Type: 1500 / 70
Year built: 1979 / 1982
Plate size: 1500 x 1500 mm
Number Plates: 70
Filter area: approx. 250 m2
Press content: approx. 3500 liters
Cake thickness: 30 mm
Plate material: polypropylene
Filter pressure:: 15 bar
Ca0mxwa7ez
Construction form: overhead bridge
Cycle: Geschlossen
Plate Transport: automatic
Condition: Used
Accessories: incl. hydraulics & filter cloth washing system
Message...
8
Very well maintained VORAN brand binding press.
new belt, new regulating valve, new maintenance unit.
In the metering box there is an additional connection for feeding the mash with a mash pump.
incl. attached brush cleaning.
For operation a compressor and a high pressure cleaner are necessary. These are not included in delivery.
current new price: € 86.000,-.
Technical data:
Height marc discharge 890 mm
Height waste water drain 250 mm
Cbvh7hjclw
height juice drain 400 mm
Connection for juice d...
8
Mobile hand-operated chamber filter press for 200 litres/hour
B0va9qrkyu
9
Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press
-Manufacturer: Poligrat, chamber filter press type 470-20/2
-Model: 11 panels
Qckjl
-Hydraulic Cylinder: Stroke: 115mm
-Dimensions: 1315/920/H1720 mm
-Weight: 580 kg
5
Capacity: 1 - 2 t/h
Power consumption: 2,2 kW
weight: 1400 kg
Prytl
Basic construction: Frame
equipment: Rotary screen, catchment tank, pump, juice sieve,Control cabinet
15
Description: Belt filter press
For continuous sludge dewatering complete with 2-stage high-performance pre-dewatering zone with 2-fold sludge layering.
With drive by infinitely variable three-phase geared motor.
The machine consists of a completely closed, strong sheet steel housing with synthetic resin coating, the lower part of which is designed as a filtrate collection basin.
Type: KS 5
Manufacturer: Klein-Fischbach
Year of manufacture: unknown
Bejynlgedl
Documentation: no
Inspection: ye...
4
The chamber filter press is available immediately and can be inspected in our warehouse in Sinsheim, Germany at any time by appointment.
Name: Chamber Filter Press
Manufacturer: Rittershaus & Blecher
Type: 1200
Year built: 1977
Empty weight: 34 tons
Plate size: 1200 x 1200 mm
B9o2jx7efg
Number Plates: 140
Filter area: approx. 350 m2
Press content: approx. 5000 liters
Cake thickness: 30 mm
Plate material: 53 in polypropylene and 87 with glass fiber reinforcement
Filter pressure:: 15 bar
Constru...
4
Height marc ejector 775 mm
Height waste water drain 120 mm
Height juice drain 485 mm
Connection for juice drain DN25
Connection for waste water DN50
Contact time 1 min
Belt speed 2 m/min
Material 1.4301 / AISI 304
Weight 355 kg
Application width 240 mm
Strip length 4 900 mm
Strip width 350 mm
Height acceptance 1 350 mm
Height 1 350 mm
Width 970 mm
Length 1 290 mm
Electrical fuse protection 16 A
Electrical connection 400V 50Hz (three-phase)
Cboma3yfb3
Motor power drive motor 0.37 (0.5) cleaning...
8
Coolant tank with deep bed filter
Tank 600 ltr. with 2 high pressure pump
Ffauiwr
6
CNC controlled belt grinding machine make TAGLIABUE type TT-3-1300
machine # E6/36886 year of construction 1996
technical data:
max. grinding belt width 1300 mm
max. passage 1300 mm
grinding range 4 - 350 mm
infinitely variable belt speed 6 - 12 m/min.
variable feed speed of the conveyor belt 5,0 - 25 m/min.
grinding belt size 8500 x 150 mm
lamellar belt size 6530 x 140 mm
Caemywtu0v
wide belt feeding table 5000 x 1200 mm
unloading roller belt table 4000 x 1400 mm
Air consumption 1400 l/min.
Air...
7
Stainless steel designed.
Nominal capacity up to 2400 kg/h (depending on fruits & operating
condition).
Yield up to 75%.
Belt width/length: 750mm/approx. 8000mm.
Working width/high: 688mm/0-50mm continuously.
Belt speed continuously variable 1,0-5,2m/min.
Electrical supply: Drive motor 0,75kW 240V/50Hz.
Washing motor: 0,18kW 240V/50Hz.
Waterconsumption for belt cleaning: Approx. 3 l/operating minute.
Ft7n33t
Weight approx. 1100kg.
Dimensions: (lxwxh) 2610x1450x1642mm.
without high-pressure clean...
15
Description: 800 chamber filter press with motor hydraulics, 2x light barriers, control cabinet, open filtrate drain, filtrate chute made of PP, discharge flaps made of PP (hydraulically controlled) and automatic plate shifting. Chamber filter press can be controlled manually or automatically.
Type: KF080.100.025 FAO-2EH
Manufacturer: Filox
Year of manufacture: 2010
Documentation:
Inspection: yes
Storage location: Warburg warehouse
Caep7xsibi
Status: used / second hand
plate size: 800 ...
6
The used filter press has a base with a discharge screw conveyor.
Name: Chamber Filter Press
Manufacturer: HAKÜ / Kübler
Type: KFP800AU-LV-GA4
Year built: 1989
B8yj9rrku2
Empty weight: 6000 Kg
Plate size: 800 x 800 mm
Number Plates: 61 (erweiterbar auf 76)
Filter area: approx. 67 m2 (expandable to 83 m2)
Press content: approx. 900 liters (expandable to 1100 liters)
Cake thickness: 30 mm
Plate material: polypropylene
Filter pressure:: 12 bar
Construction form: side rail press
Cycle: closed
Plat...
4
Used Frame Filter Press / Filter Press REWA 1200x1200
Number of chambers: 50
Nfmhbxjrr
The machine is in a new condition.
15
Description: The suspension (slurry) passes through a
via a feed box to the drain bed, where the suspension releases water by gravity filtration. The slurry cake is rearranged by built-in baffles so that the water can run off on the surface of the slurry cake. The built-in baffles break up the resulting sludge layer, so that permanently free screen belt surfaces are created, which allow the water released by the flocculation to flow off quickly. The dewatered sludge is removed from the Drain Bel...
8
The used mobile filter press system is built on two levels, in the lower level all pumps and the shredder are installed, as well as the double trough screw conveyor and storage space for the accessories.
On the second level is the press frame with hydraulic system, a polymer dissolving station with maturation tank, a raw polymer tank, a slurry storage tank and the control cabinet.
Name: Mobile Chamber Filter Press
Manufacturer: Filox
Type: 1200-80-25
Year built: 1992
Empty weight: total weight...
3
Used Chamber Filter Press / Filter Press
Passavant 1200 x 1200
Plate size: 1200 x 1200 mm
N9rrslpx
Working length: 4000 mm
Number of plates: 68
Cake thickness: 30 mm
Filter pressure: 15 bar Closing pressure: 350 bar
Plate material: PP (Polypropylene)
Filtrat discharge: closed
Motor voltage: 380 Volt / 50 Hz
Plate transport: automatically
Filter cloths: optionally
11
Design: Piston diaphragm pump for chamber filter press feeding, with base for vibration damping.
Type: SP529G
Manufacturer: Emmerich
Year of construction: 2001
documentation:
Inspection: no
Storage location: Warehouse Warburg
Status: used / used / second hand
Delivery rate: 25 m³/h
Pressure: 15 bar (max. operating pressure)
Serial number: 5642 (Pumps - No)
Description: - (pressurized air vessel)
Temperature: +10 ... +90 °C (operating temperature)
capacity: 116 l
Pressure: 16 bar (o...
4
Name: Chamber Filter Press
Manufacturer: Püttmer
Type: KFP 1000/25/30
Year built: 2008
Empty weight: approx. 6000 kg
Plate size: 1000 x 1000 mm
Number Plates: 31
Filter area: 48 m2
Press content: approx. 650 liters
Cake thickness: 25 mm
Plate material: PP-Homopolymer
Filter pressure:: 15 bar
Construction form: side rail press
Cycle: open
Plate Transport: automatic
Dimensions: L 4700 mm x W 2000 mm x H 1900 mm
Condition: Used
Technical documentation: yes
Accessories: A hydraulic system, a contro...
1
Filter plate specification: 390x390 mm
Filtering area 2.8m2
Number of filter plate 14pcs of chamber plate including one tail plate and one head plate
Filtering pressure 0.6-1.6Mpa
Thickness of filter cake 25mm
Filtering chamber volume 35L
Filtrate
discharge Open type outlet
Construction
material for
framework
Main material for
framework is SS 316.
carbon steel.
Contact parts in PVC or SS.
Material of filter
Qplor30au
plate
Material for
chamber plate is
PP
Working temper...
10
Design: Piston diaphragm pump for chamber filter press feeding, pump head made of PP
Type: MS528PPH
Manufacturer: Emmerich
Year of manufacture: 2010
Documentation: no
Inspection: no
Storage location: Warburg warehouse
Status: used / second hand
flow rate: 7.5 m³/h
pressure: 16 bar (max. operating pressure)
serial number: 6936 (pump - no.)
Description: - (pressure shock absorber)
Temperature: +10 ...+80 °C (operating temperature)
Capacity: 2x 12 l
Opzxv
Pressure: 16 bar (operating o...
4
The used filter press previously dewatered sludge residue from a lamella clarifier from the stone-soil sector.
Name: Chamber Filter Press
B92kpkjtet
Manufacturer: Püttmer
Type: KFP 1000/25/30
Year built: 2008
Empty weight: approx. 6000 kg
Plate size: 1000 x 1000 mm
Number Plates: 31
Filter area: 48 m2
Press content: approx. 650 liters
Cake thickness: 25 mm
Plate material: PP- homopolymer
Filter pressure:: 15 bar
Construction form: side rail press
Cycle: open
Plate Transport: automatic
Plate pac...
1
MACHINE: Chamber filter press used
Usage area: Chamber filter press, pilot plant
Design: page Holm led
Filter plate format: 400 x 400 mm
Plate number: 15
Filter plates: PP
Lkas7
Thickness: 25 mm
Filter cloths: optionally available in voting on the medium
Procedure: open
Filter surface: approx. 3.0 m square
Presses contents: approx. 37 dm3
PCB package length: 700 mm
Filter pressure: 15 PSI
Plate transport: manually
Pumps: optional
Buying or renting: Visit the facilities in consulta...
12
Description: 630- chamber filter press with manual hydraulics. The hydraulics have been tested for function and tightness. Drip plate made of PP, without filtrate gutter. Chamber filter press with rust damage on the side bars,/head and end plate.
Type: KFP 630
Manufacturer: Hakü
Documentation: no
Inspection: yes
Storage location: Warburg warehouse
status: used / second hand
plate size: 630 mm
number of plates: 26 (with head and end plate)
volume: 175 l
Material: PP (filter plates)
pla...
4
Name: Chamber Filter Press
Manufacturer: Filox
Type: KF 080.040.025
Year built: 1995
Empty weight: approx. 5165 kg
Plate size: 800 x 800 mm
Number Plates: 51
Filter area: 52 m2
Press content: 596 liters
Cake thickness: 25 mm
B9n8crtn2e
Plate material: polypropylene
Filter pressure:: 16 bar
Construction form: side rail press
Cycle: open
Closing pressure: 380 bar
Plate Transport: automatic
Dimensions: L 5500 mm x W 1900 mm x H 1680 mm
Condition: Used
Technical documentation: yes, in German langua...
1
Machine: Chamber filter press
Type: UM 1200 x 1200
Execution: filter press
Filter plate format: 1200 x 1200
Year of construction: 1977 refurbished 2017
Ju2hqi
Number of plates:
Filter plates: 43 in PP
Filter cloths: optionally available in voting on the medium
Presses contents: approx. 1560 dm3
Filter pressure: 15 PSI
Material: product-contacting parts flange, traverses stainless steel, PP or rubberized
Material: non-product-contacting parts stainless steel
Safety device: E.g. photocell etc. opt...
10
Design: Piston diaphragm pump for chamber filter press feeding, pump head made of PP
Type: MS528PPH
Manufacturer: Emmerich
Year of manufacture: 2010
Documentation: no
Inspection: no
Storage location: Warburg warehouse
Bztkwmj2g
Status: used / second hand
flow rate: 7.5 m³/h
pressure: 16 bar (max. operating pressure)
serial number: 6936 (pump - no.)
Description: - (pressure shock absorber)
Temperature: +10 ...+80 °C (operating temperature)
Capacity: 2x 12 l
Pressure: 16 bar (operati...
2
Passavant 1200/70
Article no.: RE-HU-2019-1001-KFP30-e
System: Passavant 1200/70
Size of plate: 1200 x 1200 mm
Number of plates: 70
Filterplates: Polypropylene
Filter cloths: as an option
Filter surface: approx. 146 m²
Volume of filtercake: approx. 2100 dm³
Ivasl2yos
Filter pressure: 15 bar
Closing pressure: Min. 380 bar, max. 410 bar
Plate closure: electro hydraulic
Plate transport: automatic
Control cabinet: as an option
Pumps: as an option
Accessories: as an option
Special serv...
1
Filter plate specification 250X250mm
Filtering area 0.56m2
Number of filter plate 8pcs of chamber plate including one tail plate and one head plate
Filtering pressure 0.6-1.6Mpa
Thickness of filter cake 25mm
Filtering chamber volume 7L
Filtrate
discharge Open type outlet
Construction
material for
framework
Main material for
framework is carbon steel.
Hmkgxvgys
Contact parts in PVC or SS.
Material for
chamber plate is
PP
Working temperature
<90 ℃
Overall dimension 960X4...
2
Installation: Chamber filter press used
Design: page Holm led
Filter plate format: 470 x 470 mm
Plate number: 26
Filter plates: PP
Thickness: 30 mm
Procedure: open
Filter cloths: optionally available in voting on the medium
Open filter surface: approx. 9.7 m m²
Presses contents: approx. 130 dm3
PCB package length: 1500 mm
Filter pressure: 15 PSI
Closing pressure: approx. 380-410 bar
Plate transport: manually
Dimensions: Lxwxh
Q38djx8lc
Empty weight: Accessories: depending on the t...
3
System: Chamber filter press Hoesch
Type: 47.12 1516 VLT K 30666
Size of plate: 1500 x 1500 mm
Year of manufacturer: 1991
Number of plates: 100
Filterplates: Polypropylene
Filter cloths: as an option
Filter surface: approx. 388,8 m²
Volume of filtercake: approx. 5610 dm³
Filter pressure: 15 bar
Closing pressure: Min. 380 bar, max. 410 bar
I0ivwdfku
Plate closure: electro hydraulic
Plate transport: automatic
Control cabinet: as an option
Pumps: as an option
Accessories: as an opti...
2
Hydraulic cylinder Cilinder stand exchange cylinder
Chamber filter press
Qgyuyg
As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.
1
Used Chamber Filter Press / Filter Press
Nfmevn3rj
Rittershaus & Blecher / R & B A4IS 2000
Year of manufacturer: 1988
Plate size: 2000x2000mm
Cake thickness: 20 mm / 30 mm
Number of plates: 150
Filter pressure: 15 Bar
Closing pressure: min. 300 bar / max. 320 bar
Plate material: PP
Dimension: 2x2m
You can rent and buy !
2
Used Chamber Filter Press / Filter Press HAKÜ 470 x 470
Plate size: 470 x 470 mm
Working length: 920 mm
Cjew8yvo
Plates: 13
Cake thickness: 30 mm
Filter pressure: 15 bar
Closing pressure: 320 bar
Volume of filter cake.: 51,5 Liter
Plate material: PP
Filtrate discharge: open