Used Kleingebindewannen Kl for sale (18,801)

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm Nsdpfxjb A Imvj Ah Ujwr -Weight: 55 kg

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm Nodpfx Ajukitxjh Uewr turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, tank capacity: 2,732 l, GENERAL Equipment: Discharge tap Design: vertical Remarks: Total height including agitator shaft; handhole diameter 200 mm Internal diameter: 1,690 mm Total height: 2,200 mm Heating/Cooling: available Max. permissible operating temperature: 80°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 0.50 bar Top: bolted cover Agitator: anchor agitator Support type: height-adjustable feet Location: Bremen Cylinder tempering: half-pipe coil Nameplate: Volume: 2,732 liters Double jacket volume: 51.0 liters Double jacket material: V2A 1.4541 (AISI304) Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 970 mm Last intended use: Chemicals TANK Max. permissible operating temperature: 80°C Number of feet: 4 pcs EQUIPMENT Manhole/Dome: handhole Note: Motor/gearbox missing, handhole cover missing Outlet: 25 mm MATERIAL PROPERTIES Nsdpfx Ahexqa U To Uswr Foot material: stainless steel AGITATOR 1 Agitator arrangement: central, top-mounted

Condition: used, Year of construction: 2021, operating hours: 2,020 h, Crawler-mounted Jaw Crusher Kleemann MC 100i EVO, suitable for natural stone and recycling applications. Equipped with a Deutz 6-cylinder engine rated at 155 kW, with a crushing capacity of approximately 150 tons per hour. Features frequency-controlled feed chute with integrated pre-screening, intelligent overload protection system for temporary peak loads to protect the crusher, crushing jaws made of high-quality manganese steel that can be turned for even wear. Includes radio remote control, touchscreen control panel, lockable control cabinet (dust- and vibration-protected), water spray system for dust suppression, lighting: 3 LED floodlights with extendable light mast. Feed height: approx. 3,200 mm, feed capacity: approx. 220 t/h, feed hopper volume: approx. 3.2 m³, feed hopper dimensions: approx. 1,900 x 3,000 mm, vibrating feeder: approx. 870 x 3,940 mm, side discharge conveyor: approx. 500 x 5,000 mm, hydraulically foldable, can be operated on either side, discharge height side conveyor: approx. 3,000 mm, crusher inlet: approx. 950 x 550 mm, hydraulic gap adjustment 20-130 mm, crusher discharge conveyor: 1,000 x 10,100 mm, discharge height: approx. 3,660 mm. Generator: 68 kW / 85 kVA, 230/400 V, 123 A, 50 Hz, permanent magnet separator, belt scale, German machine. The vehicle may feature advertising decals and/or lettering. Our offer is generally without new TÜV approval. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops! The vehicle may feature advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Nwodpfow U Ic Uox Ah Usr We are happy to provide you with a tailored financing or leasing offer for this machine. Please contact us!

Condition: new, Tool spindle 0.533.518.3 for Klingelnberg gear cutting machine, steep taper 1:3.975, length = 228 mm, Ø connection: 150 mm, Ø flange: 186 mm, Ø tool connection 99 mm, unused in original packaging, 100% functional, scope of delivery as per photos Nsdpfx Ahjxtwcyj Uewr

Condition: good (used), Year of construction: 2006, operating hours: 248 h, load capacity: 1,000 kg, lifting height: 2,800 mm, fuel type: electric, mast type: duplex, construction height: 1,900 mm, empty load weight: 907 kg, mileage: 248 km, This electric stacker from the SWISS brand STOCKLIN, built in 2006, is in good condition; Capacity is 1,000 kg; The stacker lifts up to a height of 2,800 mm; Clearance height is 1,900 mm; The battery is in good condition and comes with an INTERNAL charger; Only 248 operating hours; Schedule a test drive. Video to follow. Nwjdswv Hlxepfx Ah Uer

Condition: good (used), NH fuse switch disconnector -Manufacturer: Klöckner Moeller -Type: GSTA1 Technical data: 250 A 660 V 3-pole IP 00 -Number: 10x NH fuse-switch disconnectors available Price: per piece -Dimensions: 180/260/H115 mm Nedpfx Ahsb A N Tko Uewr -Weight: 3.5 kg

Year of construction: 2002, condition: used, max. wheel diameter 275 mm gear width 55 mm Njdjgtvbpepfx Ah Ujwr max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 1/min total power requirement 100 kW weight of the machine ca. 16700 kg dimensions of the machine ca. 5200x2300x2400 mm

Condition: used, tank capacity: 2,750 l, GENERAL INFORMATION Design: Suspended Remarks: 2 support brackets made from Fe (contact surface reversed with cut-off steel parts; see photos); further technical documentation available Speed: 313 rpm Internal diameter: 1,400 mm Ex-protection: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating overpressure: 12.0 bar Max. overpressure: 3.2 bar Agitator: propeller Support type: feet (brackets) Location: Bremen Technical documentation: drawing available Nodpfx Aexqa S Seh Uowr Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 liters Double jacket volume: 62.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,410 mm Last application: pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom tempering: half-pipe coil EQUIPMENT Manhole/Dome: on top head Outlet: available Note: Manhole cover clad, metallic discoloration inside Outlet: 130 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4541 (AISI304) AGITATOR 1 Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: eccentric in top head Top head wall thickness: 7 mm

Condition: new, Required tractor power: 100 hp Nodpfxex I Dxms Ah Uewr

Condition: new, Klingelnberg push rod for CS200 ,unused in original box, 100% functional, scope of delivery according to photos Nwsdsi Ebv Sjpfx Ah Uer

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm Njdsx Nrmbjpfx Ah Ujwr • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: good (used), NH fuse switch disconnector -GS 3 -630 A 690 V -Dimensions: 245/250/H125 mm -Weight: 3 kg Nedsb A Sgfjpfx Ah Ujwr

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW Nedpjd Il R Asfx Ah Ujwr workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

Condition: used, tank capacity: 2,750 l, GENERAL Nsdpfx Ahjxqa R Io Uowr Design: suspended Remarks: Support ring Fe; manhole crane bent Speed: 323 rpm Internal diameter: 1,390 mm Explosion-proof: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Overall height: 3,150 mm Heating/Cooling: available Power: 2.6 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Stand type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 liters Double jacket volume: 62.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in upper head (DN 500) Outlet: flange DN100 Note: Manway cover plated MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator arrangement: eccentric in upper head

Condition: excellent (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel without circuit breaker DGUV V3 tested Njdpeiduifefx Ah Ujwr Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 3 months warranty Option: cherry plate cherry stoner Visit our large bakery machine exhibition

Condition: used, floor-plate length 1050 mm floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m table plate of PFSU 1600, Ø 1050 mm Nwsdeu Sbfkspfx Ah Uor

Condition: used, axle configuration: 2 axles, first registration: 10/2016, loading space length: 10,400 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, total length: 10,600 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 40 %, color: blue, Year of construction: 2016, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 40%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Unladen weight: 5,640 kg Nsdpfxjx Nh Dio Ah Uewr Payload: 12,360 kg Gross vehicle weight: 18,000 kg Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we’re a reliable part of Heisterkamp Transportation Solutions. We handle pre-owned trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are dependable, meet today’s requirements, and uphold the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, isolating switches -Manufacturer: Klöckner Moeller, motor protection switch high-performance switching drive -Type: S-PKZ2 -Motor protection switch: PKZ2 -Contact blocks: A 600 / P 300 A 600 / Q 300 -Number: 50x switchgear available -Price: per piece Nedpfeuxg Iqex Ah Ujwr -Dimensions: 205/80/H145 mm -Weight: 2.0 kg

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability Nedegr Harjpfx Ah Uswr - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: used, tank capacity: 1,345 l, GENERAL Design: Suspended Remarks: 2 support lugs made of V2A stainless steel (bearing surface inverted; see photos); some flanges made of Fe; heating connections cut off; minor sheet metal cutouts on the insulation jacket Speed: 313 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX guidelines under local conditions must be verified) Total height: 2,950 mm Heating/Cooling: available Insulation: available Nwjdpfx Ahsxqa N Ro Uer Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: Propeller Support type: support lugs Location: Bremen Cylinder tempering: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,360 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Base tempering: half-pipe coil INSULATION Insulation jacket material: aluminium EQUIPMENT Outlet: flange DN80 Note: slight residues, pressure marks on the insulation jacket MATERIAL COMPOSITION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage Volt: 220/380 Volt Agitator arrangement: eccentric in the top cover

Condition: excellent (used), machine/vehicle number: 9605041, first registration: 10/1996, color: blue, Year of construction: 1996, operating hours: 1,565 h, Model year: 1996 Technical condition: very good Nodpfxsx I Sc Ts Ah Uewr Visual condition: very good Damages: none Please contact Thierry Leemans for further information.

Condition: good (used), PLC control -Quantity: 8 pieces available Price: per piece Nwedpfx Ajb A Hyfeh Ujr -Weight: 2.5 kg/piece

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Nwedpjvq Sd Refx Ah Uer Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -with: burner body Nsdpfxjflrqbe Ah Uswr -Length: 4.25 m -Tuchel: 5-pin connector -Weight: 2.5 kg