Used Kramer 380 for sale (68)

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Lhedpfx Aey Siftsfwsk

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: Lhsdpfevaatfox Afwok - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Lodpfx Ajyttv Rsfwehk

Condition: like new (used), Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Lsdsxrvtzspfx Afwohk Power: 25kW

Condition: refurbished (used), Krämer+Grebe WW200 The machine has been completely overhauled. All ball bearings and seals on the machine have been replaced. The interior has been completely repainted, and the exterior has been polished. Equipped with a 200L trolley (cutter wagon). Lhedepuf Iuopfx Afwsk Inspection is, of course, possible by appointment. Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the provided information and prices are not guaranteed. Warranty and/or liability is excluded. The machine remains our property until full payment has been received.

Condition: excellent (used), Kramer SBMM 70 Kramer SBMM 70 beading machine edging machine, slitting machine, roller Lhjdpora Nw Iefx Afwok Manufacturer: Kramer type: SBMM 70 max. plate thickness: 1.75 Cylinder center distance: 70 mm Maximum working depth: 280 mm Drive power: 1.1 kW Operating speed: 4.5/9 meters/minute constant. Operating speed with stepless drive: 2.5-21 mm shaft diameter Weight: 190 kg ​

Condition: excellent (used), Height 360 cm Length 240 cm Width 220 cm Lhodpfx Aort Tt Djfwsk 2.5 kW motor 4,800 m³h

Condition: good (used), The KRÄMER+GREBE TMG 1500/200 mixing grinder is a professional stainless steel machine designed for industrial meat processing. It is ideal for grinding and mixing both fresh and partially frozen meat. Mixing Grinder CFS – KRÄMER+GREBE TMG 1500/200 Manufacturer: CFS – KRÄMER+GREBE Model: TMG 1500/200 Year of Manufacture: 1998 Machine Number: 371/0109 CE Certification: Yes Machine Features: Mixing tank capacity: approx. 1500 liters Processing capacity: Fresh meat: approx. 800-900 kg Partially frozen meat: approx. 700-750 kg Meat grinder throat diameter: 200 mm Main motor power for grinder: 45 kW (1 speed) Screw speed: 160/320 min⁻¹ Main motor power for mixer: 7.5/11 kW (2 speeds) Mixing paddle speed: 16/32 min⁻¹ Additional Equipment: Pneumatic sorting device Pneumatic discharge flap for mixer Stainless steel base Integrated loading for 200-liter wagons Application: This mixing grinder is ideal for meat processing plants that require efficient and reliable machinery for grinding and mixing large quantities of meat. Machine Benefits: High performance when processing both fresh and partially frozen meat. Durable stainless steel construction ensures longevity and easy maintenance. Adjustable mixing and grinding speeds allow customization of settings to meet various production needs. Integrated pneumatic systems provide smooth and efficient operation. Ledpfxjumlibo Afwehk

Condition: used, Grinder Manufacturer: Kramer Grebe Model: WW200 For processing chilled meat and frozen meat blocks Made of stainless steel Hopper volume: 400 liters Diameter: 200 mm Voltage: 400V, 50Hz Ledjtq T Rdjpfx Afwshk Two speed motor Electric power: 31/40 kW Productivity up to 12000 kg/h Weight: 1300 kg

Condition: used, Cutter Lhedox Dcfnspfx Afwjk Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Lsdpfx Ast Uqbljfwjhk Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: excellent (used), power: 34 kW (46.23 HP), fuel type: diesel, color: other, lifting height: 2,800 mm, Year of construction: 2023, operating hours: 1,340 h, Technical information Number of cylinders: 4 Engine capacity: 2.190 cc Engine type: Yanmar 4TNV88 Measures Dimensions (LxBxH): 479 x 165 x 239 cm Lhodpfozcb Dujx Afwok Weights Empty weight: 2.620 kg Carrying capacity: 1.700 kg GVW: 4.320 kg Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Boom suspension - Hydraulic quick coupler - Mudguards - Pallet forks - Radio - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Duitsland Condition CE type: CE Suspension arms, 30 km/h, 4-wheel steering, Bucket and pallet forks

Condition: like new (used), Meat grinder K+G Wetter Operating voltage: 400V / 50Hz Lodpfxjx Aydlj Afwohk Control voltage: 24V Power: 38kW

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm Ledpfx Afexbtrtewehk daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm Lhedpfx Afowrb Srowsk -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Lhedpfx Afepgnftowok Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: refurbished (used), Krämer + Grebe 200L cutter The machine is completely overhauled by us. All wear parts have been replaced on the machine. The electrics on the machine is new! Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information contained and prices are not guaranteed. Lhodpfx Afjp Aub Ijwsk A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: used, Inlet diameter: 250 mm Outlet diameter: 250 mm Volume flow: 5,000 m³/h Motor power: 5.5 kW Lodpfjyvz Rvex Afwjhk Weight: 100 kg

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 56 l, color: yellow, operation weight: 2,675 kg, maximum load weight: 1,310 kg, lifting height: 2,520 mm, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.45 m³, Year of construction: 2025, operating hours: 3 h, Equipment: all wheel drive, cabin, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: November 2025 Operating hours: 3 h (transport and test hours only) Operating weight: 2,675 kg Max. tipping load: 2,270 kg Bucket capacity: 0.45 m³ Transmission: Hydrostatic Drive: Permanent four-wheel drive Differential lock: Yes Quick coupler: Hydraulic Cabin: Fully enclosed Cab heater: Yes Tyres: Pneumatic, suitable for rough terrain Engine manufacturer: Yanmar Engine power: 18.5 kW Emission class: Stage V Hydraulic output: 39 l/min Lodpfx Afsymxxwowjhk CE certified: Yes === ADVANTAGES === Brand new machine German manufacturing Only transport/test hours CE certificate and full documentation included Ready for immediate transport and operation === CONDITION === As new condition – unused machine with only transport and test hours. No wear and tear, no previous owner. Fully inspected and immediately available. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). New Kramer 5045 wheel loader, manufactured in 11/2025 and fitted with only a few test hours. This compact yet powerful machine combines excellent manoeuvrability with a tipping load of 2,270 kg and a bucket capacity of 0.45 m³. Equipped with hydrostatic drive, hydraulic quick coupler, and a fully enclosed heated cabin – ideal for construction sites, landscaping, and urban projects with limited space. Fully CE certified and available from stock for immediate delivery. === DELIVERY === Crane loading possible upon request. Flexible worldwide transport options available. Transport is handled professionally by Collé Rental & Sales.

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Lhodpfx Aewm Nrvofwek Discharge diameter: 300 mm Flow rate: 5400 m³/h Motor power: 2.5 kW Weight: 100 kg

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Ljdpew Nhbmofx Afwehk -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Lhjdpfjrfwyrox Afwjk

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Rear stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Dimensions, machine L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Safety cable at the front, electrically secured • 1 side stop on the right • 1 support arm • Gear brake motor • The current working height is 905 mm. This can be lowered by 150 mm to 755 mm, as the machine has been raised on its machine feet. • Manual central oil lubrication • Electric foot switch We have resharpened and readjusted both blades. Ledpfxefpa Ihe Afwehk Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1984, Intake diameter: 160 mm Discharge diameter: 160 mm Flow rate: 2500 m³/h Motor power: 2.2 kW Weight: 50 kg Ledpfxjwm Nr Ao Afwshk

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Lhjdpfx Afjww I Tmjwek