Used Ks 205 for sale (2,797)

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Ljdpfx Adjvqbhljtshf Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: ABB Ledpowrcwcofx Adtohf Model: IRB6700-205/2.80 Year of manufacture: 2017 Includes control unit Includes handheld pendant Includes cable set Weight: approx. 1,260 kg 2 units available Optional with linear track approx. 25 m Type: IRBT6004

Condition: used, 2½-deck screening machine Screening area: approx. 1,900 x 6,500 mm Lhsdpfx Aswwr Eyodtsf Without drive (power requirement approx. 18.5 kW)

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Lhjdjyza Ahjpfx Adtof Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: good (used), Year of construction: 1989, well-maintained multiblade saw Ledpey Dnxisfx Adtjhf Chain width: 230 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: Lhsdey D Rxrjpfx Adtef - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Belt dimensions: 2600 × 200 mm - Work table: 935 × 460 mm - Auxiliary table at the belt tensioning roller: 350 × 350 mm (with contour sanding attachment) - Sanding mandrel with rubber drums, supplied with sanding sleeves in diameters of 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with a separate, maintenance-free oscillation motor - Table height adjustment with handwheel, also adjustable relative to the sanding belt (front and back) - Sanding unit tiltable from -10° to 90°, tilting via handwheel with digital inclination display - Accurate angle precision via mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer mechanism - Fast conversion from veneer to solid wood sanding - Height-adjustable idle roller table with adapter for dust extraction for sanding at the belt tensioning roller - Large mitre gauge with infinitely variable angle adjustment and movable ruler - Dust extraction: adapters Ø 100 mm on both sides (idle roller table, right and left extraction hood) - 2 power sockets 400 V on the machine stand (for machine and feed unit) - Torsion-resistant, heavy-duty steel frame for high running smoothness and stability - Large work table with sliding surface - Recess in the machine stand for pallet truck – facilitates internal transport Dimensions: 1700 x 1000 x 1100 mm Lodjxwz I Iopfx Adtjhf Weight: approx. 415 kg Availability: short-term Location: Röllbach

Condition: good (used), Manufacturer: Mil-tek Model: 205 TS Machine type: Plastic press / Film press Operating pressure: 8 bar Lhsdoyx Skropfx Adtef Test pressure: 11 bar Material container: 20 l Drive: pneumatic CE marking: present Quantity: 4

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm Lhedoyy Rqajpfx Adtof - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: new, functionality: fully functional, empty load weight: 220 kg, maximum load weight: 1,130 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,330 mm, loading space height: 430 mm, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS MP 205 133 1350 2 NEW VEHICLE Lhsdpfxogrqy Re Adtof Internal dimensions: 205cm x 133cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1350kg Payload: 1130kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls Steel railing Rear tailgate foldable and detachable with tension lock 15mm thick, non-slip, durable phenolic plywood floor Jockey wheel 6 lashing rings with 400kg tensile force each 14" reinforced C-tyres M+S tires Net/rope hooks on the frame 13-pin plug Front position lights Rear lamps with reversing light, rear fog light, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and detachable front wall - Loading ramps - SARIS alloy wheels - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh tailgate in different heights, also enclosed - Flat tarpaulin with or without bows - High tarpaulin 120cm - Rear supports Further accessories available on request! Plus freight to Gera and vehicle registration certificate (Kfz-Brief) €100 net Images are examples and may show optional accessories subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open on weekdays from 8:00 to 17:00 for repairs of all kinds. Specialist in axle repairs, including for caravans. Wide range of rental trailers available. We also offer a large selection of spare parts and accessories for trailers of all brands. Consultation by phone, visit our website, or drop by in person.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 25512, functionality: fully functional, power: 30 kW (40.79 HP), cutting height (max.): 105 mm, cutting width (max.): 310 mm, saw blade diameter: 350 mm, rotational speed (max.): 4,200 rpm, overall weight: 2,200 kg, Equipment: documentation/manual, Raiman KS 310 fully functional Lhodpfxey Dug Ts Adtef

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm Lhsdsyz Tqropfx Adtsf - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm Ljdpob H Ibusfx Adtjhf rear stop: 520 mm power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Condition: ready for operation (used), Year of construction: 1955, gr. Working width: 2040 mm Lhedpfx Adstgf Nkstef for sheets up to: 1 mm Weight: approx. 680 kg Space requirement: 2650 x 650 x 1180 mm

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg Lhodpfx Adjx Hpytstef change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Ledpfjyz An Tsx Adtshf

Year of construction: 2022, condition: new, bearing diameter 120 mm motor Synchronmotor Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Torque 76,4 Nm current 38 A Unused grinding spindle for Höfler Rapid 1250 Lhedpfoua Itusx Adtof

Condition: new, Year of construction: 2022, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 456516, overall weight: 255 kg, load capacity: 20 kg, arm reach: 2,010 mm, This is a new KUKA KR 20 R2010 KS-F/SEL industrial robot with a KRC5 Dualcab AC SPB controller, year of manufacture 2022. The robot includes the following options: KUKA.ActivationManagmentTool KUKA.Platform DiagnosisServiceEtherCat ExpertTech GripperSpotTech KUKA.BoardPackage KUKA.DeviceConnector pre-installed KUKA.PROFINET MS KUKA.SoftwarePackage smartPAD-2 KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration LoadDataDetermination OrangeApps.UserLogonUSB SafeOperation UserTech Lodpow Dquaefx Adtjhf

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Lodpfx Aeudbzmjdtohf Both have a capacity of 1.5mm iron - aluminum significantly more Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot Lsdpfx Adefdd Avetehf -Fixators: for machine tools and systems -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Ljdpfeyxn Hcsx Adtjhf

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Ledpfxevzmtzj Adtehf Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: used, We offer this used ARI Ds-73+1 Ari ds-73 ks-12. Söderhamn / Ake, year of manufacture unknown. Lodpfx Adey Er T Hjtohf If you have any questions or need more information, feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, Working travels 2000 x 550 x 560 mm Spindle taper BT40 Lhjdpfxsrrf Svj Adtef Spindle speeds -12'000 rpm Tool changer 32 Pos. FANUC 18i control Tool breakage control device Tool length measuring device Partition for pendulum operation Chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Lhsdpfx Aewnrf Ujdtef Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -