Used Ks 205 for sale (57,671)

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear units SEW type: S40 -Manufacturer motor SEW type: DFT71C2BAZ -Motor power: 0.37 kW -Speed range: 41-205 rpm -Motor: adjustable Hsdpocxta Ssfx Ag Nofn -Drive shaft: Ø 25 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 560/180/H275 mm -Weight: 30 kg

Condition: used, mileage: 231,456 km, power: 115 kW (156.36 HP), first registration: 05/2007, overall weight: 5,800 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro4, total length: 5,460 mm, total width: 2,170 mm, total height: 2,750 mm, number of seats: 7, Equipment: ABS, parking heater, MB Vario 616D 668.3 /Tipper + flatbed + tarpaulin/ Superstructure HSW KS-2 Equipment: * Additional heater * Raised headlights Hfedpfx Asw I T Tlog Nen * Snow plough mounting plate * Beacon (RKL) * Trailer coupling * Roof hatch +++Signs of use and operational wear+++Municipal first ownership+++

Condition: used, 2½-deck screening machine Screening area: approx. 1,900 x 6,500 mm Without drive (power requirement approx. 18.5 kW) Hfjdpfx Aswwr Eyeg Nen

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) Hedpfet Hw Amjx Ag Nsfn

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: Hjdpfx Asir Eubsg Nsfn - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: excellent (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Hjdpfx Aerrn U Tjg Nsfn Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 34.748

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, compact cylinders Hodpfx Ajfxbgfjg Njfn -Manufacturer: Wabco Westinghouse, compact cylinder -Stroke: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Number: 2 Stück -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Hfedpfx Ageuw Dnxe Njn

Condition: as good as new (ex-display), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, number of slots in tool magazine: 49, input voltage: 400 V, type of input current: three-phase, Vertical machining center CHIRON FZ08 KS Magnum TECHNICAL CHARACTERISTICS: CNC control FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115° [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 49 Part turnaround by robot (6th side machining): Yes RS232 Interface: Yes Total power required: 17 [kVA] Supply voltage: 400 [V] Number of hours under power: 20292 [h] Number of running hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 spindle cooling unit x1 parts catcher with conveying strip x1 coolant tank x1 unit for 6th face machining x1 collet chuck x30 tool holders type HSK40 BIG KAISER x15 collets type F37 SCHAUBLIN x1 maintenance manual Hsdpfx Asww H D Deg Nefn x1 electrical diagrams manual x1 operator's manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total width: 1,900 mm, total height: 2,000 mm, total length: 3,350 mm, grinding width: 400 mm, power: 34 kW (46.23 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 455 mm, workpiece width (max.): 400 mm, Strip sanding machine / parquet sanding machine Manufacturer: VG Machines Type F/G 455 2 KS / 2KS Year of manufacture: 2018 Machine originates from a parquet manufacturer Line design / road machine (movable upper section) for calibrating and sanding from below and above in one pass Working width: approx. 400 mm Equipped with: 1x calibrating roller from above, approx. 11 kW 1x sanding pad from above, 5.5 kW Hjdpfxewu N Uye Ag Nofn 1x calibrating roller from below, approx. 7.5 kW 1x sanding pad from below, 5.5 kW Sanding belt dimensions: 455 x 1900 mm Infinitely variable feed rate, max. 16 m/min., motor approx. 2.2 kW Voltage: 400 V Total connected load: approx. 34 kW Dimensions: approx. 3350 x 1900 x 2000 mm Weight: approx. 4800 kg

Condition: excellent (used), Year of construction: 2010, mileage: 96,000 km, load capacity: 230 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS Isoli PNT 205 Year 2010 Working height 20,2 meters Horizontal outreach 9 meters Basket capacity 200 kg Hours 4900 km 96.000 circa Excellent conditions Hfsdew U Tncopfx Ag Non Complete of all documents Inspected and refurbished by service provider

Condition: excellent (used), Electronic Programmer NC 400 Hsdpfx Agod Nuwis Nofn Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Hsdpfx Agjhinzho Nsfn -Round table: swiveling, with four-jaw chuck -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

Condition: good (used), Year of construction: 2000, Clamping force: 25/35 tons Hsdpferr H T Tsx Ag Njfn Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 42.036

Year of construction: 1997, condition: ready for operation (used), General Data Measurements width 6500 mm Measurements depth 18500 mm Measurements height 2000 mm Machine weight 10500 kg Additional Equipment Press (Face Press): Pressing Pressure 6 - 12 t and power consumption of 52 kW Compressed Air Consumption: 350 NL/min for milling machine, 500 NL/min for press Suction Volume: 10600 m³/h The machine ensures fast transport cycles with precise alignment Hfjdpfxov Utpcj Ag Nen Includes a hydraulic pressing system for continuous jointing Features integrated dust extraction and suction systems This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: used, machine/vehicle number: 7160, Rotary Board Creaser STRÖBEL KS 110-0-1Serial-No. 188-1501 Hjdpfjqgkffsx Ag Nofn Working width 1100mm Smallest Sheet length 150mm Rill-Ritzwellen Ø 78mm Power 1,1 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,100 h, mileage: 36,600 km, load capacity: 230 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS Isoli PNT 205 NH Year 2017 Hedpfxjwzmgms Ag Nofn Working height 20 m Horizontal outreach 9 m Basket capacity 230 kg Hours 4.100 km 36.600 220 volt electric pump for operation even with electricity without the use of the motor Excellent conditions Complete of all documents Inspected and refurbished by service provider

Year of construction: 2023, condition: new, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Hfjdpfx Ageft U Sao Njn Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg Hedpfx Aged D Nfgj Nofn

Condition: like new (used), Year of construction: 2016, load capacity: 205 kg, arm reach: 2,800 mm, ROBOTERARM BRAND: ABB MODEL: IRB 6640-205/2.80 TECHNICAL DESCRIPTION Hfodpfxexan Iye Ag Non PAYLOAD: 205 KG MAX. REACH: 2800 MM MODEL YEAR: 2016 CONTROL SYSTEM: IRC 5

Condition: used, Year of construction: 1993, Hydraulic side shift Trailing roller PTO shaft / Hfjdpfx Aeual S Iog Nen

Condition: used, machine/vehicle number: 1339, Lederschärfmaschine / Leather sharpening machine ZPS Gottwaldov KS-3 Serial-No. 01339/P2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hjdpfetzc N Uox Ag Njfn On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm Hodpfsgylrpjx Ag Nsfn -Weight: 28 kg

Condition: like new (used), Year of construction: 2015, load capacity: 205 kg, arm reach: 2,750 mm, ROBOTERARM BRAND: ABB MODEL: IRB 6640-205/2.75 TECHNICAL DESCRIPTION Hsdpfx Ajw S Ecyjg Nefn PAYLOAD: 205 KG MAX. REACH: 2750 MM MODEL YEAR: 2015 CONTROL SYSTEM: IRC 5

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot Hjdofdd Avjpfx Ag Nsfn -Fixators: for machine tools and systems -min. height: 75 mm -max. height: 95 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece