Used Lamella for sale (109)

Condition: new, Year of construction: 2025, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 Pgjdpfx Ahor Hr Dzo Aeu C 10: LED package A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams Pgsdpfsw Nafkox Ah Aju - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Pgjdpfxjvvkipj Ah Asu

Condition: used, Consisting of: - Leiße vacuum babeling system - Moisture meter Gann - 2 sign stations - 2 pcs. Dimter Opticut 350 XL - 4 pcs. automatic stacker for short lengths Leiße - Automatic bundle formation Leiße - Finger jointing line GreCon TT long logs - Endless press Grecon 6 m (length max 13,5 m) Pgsdpfx Asiwyybjh Aju - Heights paternoster - Lamella storage - Planer Weinig Powermat 2000 XL - automatic stacking machine up to 13,5 m Plant is dismantled and immediately available

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: Pjdpfx Asu Ruruoh Asgu - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 402594, type of input current: three-phase, input voltage: 400 V, working width: 2,500 mm, power: 30 kW (40.79 HP), Equipment: CE marking, Precision Double-End Profiler, year of manufacture 2002, completely overhauled, including current CE conformity and 1-year warranty, upgraded to linear guideways and double ball screw, extended to a maximum cutting length of 2.5 m. The ideal machine for the precise cross-cutting and profiling of parquet strips and boards on end faces, also suitable for top-layer lamellas. A heavy-duty and well-proven design in precision execution, featuring guided transport chains, with 2 saw spindles and 1 milling cutter per side. Equipped with motorized length adjustment and position control via PLC touch panel, automatically adjustable to the desired length. All 6 tools are mounted on high-precision tool spindles with quiet-running belt drive and AC motor. Left-hand version. Includes 1 set of new carbide-tipped tools, milling cutters on hydro sleeves. Feed rate: 30 – 150 pieces/min Wood width: 40 – 230 mm Wood length: 250 – 2,500 mm Pgedpfxsxlnpzj Ah Aou Wood thickness: 10 – 30 mm (optionally up to 50 mm)

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements Podpfxoiidm Ns Ah Aegu - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Pgjdpfx Aherqzgko Aeu Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Podpfxsxhg Ibe Ah Ajgu Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: excellent (used), Picture 1 from manufacturer al example rest pictures original Manufacturer: Minda Pgjdpehtd E Asfx Ah Asu Designation: Timper Press V 200 Technical data: Main pressing pressure from below: Number of pressing chambers: 2 Max. Blade width: 270 mm Max. Glulam length: up to 18 m Glue beam contour: straight Lateral alignment of the lamellas: included Pressure system: hydraulic Permanent pressure control: included Packing: separate Feeding / discharging: in longitudinal direction

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby Pgodpfewgwl Djx Ah Asu mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 210 mm, cutting width (max.): 2,120 mm, cutting length (max.): 9,200 mm, saw drive: 15,000 W, total length: 11,000 mm, height adjustment type: electric, overall weight: 2,500 kg, saw blade diameter: 550 mm, JRIMAC rip saw "TOP" - NEW - - Cutting length 2200 - 9200 mm - Cutting width 420 - 2120 mm - Cutting direction left - right (right - left on request) - Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. - Precise and clean cut due to strong, self-supporting welded construction of the machine stand. - Carriage guidance via linear guides, with ball-bearing mounted, maintenance-free rollers. - Safety beam mounted above the machine table with 6 mm thick lamella protection. - Extraction connection Ø 160 mm installed at table height at top right and bottom left ready for connection. - Flexible and efficient working thanks to 250 mm opening of the slat guard above the top edge of the table. - Infinitely variable, frequency-controlled, powerful feed of the carriage. - The maximum feed speed can be adjusted. - Automatic stepless saw blade height adjustment. - Infinitely variable width stop adjustment via several operating levers. Pgodpfx Asgk Nvneh Aou - Electronic positioning control. - JRIMAC" saw blade quick clamping system allows quick saw blade changes. - Cut release as standard (small mobile foot pedal). - Front table supports made of wood, plastic or Pertinax coating. - High work safety. - Only high-quality components are used and installed. - The electrical control cabinet is easily accessible at the front of the machine. - The machine electrics are designed for 230/400 volts, 50 Hz. - BG dust-tested - EC type-tested in accordance with Directive 2006/42/EC - Forcibly guided splitting wedge - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 0-256-23-1012, Operating hours recorded: 361.69 h Working width: 1350 mm Wide belt width: 1350-1380 mm Wide belt width: H/X 1370 mm Cross belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5-13 m/min Workpiece detection: High-precision workpiece detection with a 12.5 mm pitch; multiple loading of complex parts Units: 1. Cross unit (1350 mm) (T3/5), Continuously variable, frequency-controlled cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electromagnet. Articulated pressure bar Drive motor 13.5 kW 2. X-shaped unit (1350 mm) (T3/5) with internal lamella belt and steel contact roller for mounting an articulated pressure bar with three options: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Continuously variable, frequency-controlled cutting speed 2-18 m/s MPS 2.0 Plus (1350 mm) Electromagnetic articulated pressure bar Drive motor 18.5 kW 3. U-shaped unit (1350 mm) (T3/S/7/9) Universal unit for mounting round brushes on interchangeable frames and disc brush cassettes. Terminal controlled adjustment of the brush feed and thus the immersion depth, continuously frequency controlled brush oscillation 36-240 strokes/min. Switchable Rotation direction in either forward or reverse rotation Drive motor 15 kW Cutting speed 130 - 1000 2 carriages for easier changing of brush units on interchangeable frames (service carriage for U-unit) 1 structuring brush, diameter 300 mm 1 satin brush, diameter 300 mm Pedpfxjv T Nnfj Ah Aogu 4th brush unit with structuring brush Drive motor 5.5 kW Brush material: Anderlon K 80 Diameter 150 mm Cleaning system with integrated ionization device with 16 rotating nozzles and suction nozzle Sanding belt dimensions 1370 x 2150 mm Vacuum clamping device 5.5 kW, vacuum blower integrated into the machine Machine control terminal touch screen Additional 2 roller conveyors, each L = 3000 mm, W = 1300 mm Various Sanding belts P24-P100 (approx. 50); extraction piping; mobile sanding belt holder (6 arms) Operating voltage: 400 V, 50 Hz Space requirement: L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Pgjdpfxjwgcche Ah Asu

Condition: new, Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,620 mm, grinding belt width: 1,400 mm, Heesemann multi-purpose surface grinding machine, type HSM .4 NEW Edition RQHD ROLLER/TRANSVERSE/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Stand construction with transport bed With continuous transport carpet, feed speed 3 - 15 m/min. frequency-controlled, workpiece thickness (3 - 200 mm) motor-adjustable Automatic workpiece thickness measurement in the machine infeed Workpiece suction clamping system with adjustable vacuum for transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Pjdpfx Asu Ic Rgsh Ajgu Non-driven rollers (2 each in the machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touch screen version, display for production and downtimes. Ethernet connection possible. Program memory for 100 programs Program for remote maintenance Program for extraction flap control For the extraction flaps/sliders to be installed by the customer, the external pneumatic valves can be controlled with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC) via the pre-installed, potential-free relay contacts. MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - Outfeed and infeed LED strips as operator assistance for the workpiece (infeed workpiece positioning for better sanding belt utilization, outfeed indicates workpiece position) - Belt manager status display on the unit (screen) - Aggregate information with grain size (screen) - Visualization of the position of the workpiece as it passes through through the machine. - Video camera in the outfeed of the machine 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency converter 1 longitudinal sanding unit with pressure flap belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with pressure flap belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency converter Infinitely variable adjustment of the sanding belt speeds, wear-free braking device, automatic compensation of any differences in belt edge lengths, sanding belt working in counter-rotation, oscillating sanding belt cleaning, adjustable. 2 pressure bars with computer-controlled selective pressure control system CSD® (10 year warranty) In addition, the electromagnetic CSD® system is maintenance-free, as there is no risk of contamination as with pneumatic elements. 1 Rotating disk brush unit DB-S 10 driven disk brushes, working in 2 directions of rotation, central height adjustment for abrasive wear, incl. quick-change device for disk brushes Brush fill: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of a temporary interruption in the power supply Energy Management System EMS Belt support side: left Terminal: front left Workpiece stripping device LED lighting inside the machine (on the belt support side) Further information on request.

Year of construction: 2001, condition: excellent (used), Manufacturer: ERSSON ENGINEERING AB Designation: HF Kontipres 900 Year of manufacture: 2001 Machine. No.: A 140224-1 Pgsdpfx Aog Tndlsh Asu Compressed air: 10 bar weight: 29500kg Technical data: Binder width: 80-250mm binder height: 500-900mm Feed speed: max. 8m/min optional: lamella bearing / cross bearing - Double roller conveyor incl. cross conveyor - Binder stacking and feeder Ersson - roller conveyor and tilting device binder

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, Pjdpfx Aovnv Uhsh Aegu 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine Psdoxg D Atjpfx Ah Asgu - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: new, Special offer price for in-stock items! Only while supplies last! Price net ex-works, freight prepaid. The machine does not include a base frame. BF3 Deluxe base frame is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swivel range: -90° to +90° Distance spindle to table: 60 - 485 mm Milling head height adjustment: 425 mm T-slot size: 14 mm Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor power input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without base frame Features: - Easy and quick speed changes using the gear selector switch - Versatile applications such as drilling, milling, threading, etc. - Extremely smooth operation thanks to ground gears running in an oil bath - Forward and reverse rotation for threading - Spindle adjustment via handle, fine adjustment via handwheel - Dovetail guide for the x-, y-, and z-axes, adjustable via V-shaped guides - Milling head pivots on both sides for angle drilling, milling chamfers, etc. - Large, solid cross table with precise surface finish - Optimal price-performance ratio for the cost-conscious user Scope of delivery: Keyless drill chuck 3-16 mm / B 16 Drill chuck arbor MK 4 / B 16 M 16 drawbar spindle Pjdpfx Asdh Hbcoh Asgu MK 4/3 reduction sleeve MK 4/27 mm combination milling arbor Height-adjustable protective cover Thread cutting device LED machine light Digital spindle stroke indicator Lamellar protective cover Longitudinal measuring scale Operating tool

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 80 mm, overall weight: 1,500 kg, saw blade diameter: 280 mm, input voltage: 400 V, Powerful lamella saw from Swedish production. Equipped with a 30 kW motor. Additional saw blades and spacer rings are included in the scope of delivery. Very good condition, beam width 200 mm. Transport across Europe can be organized at a good price. Pgsdpsxg N Emofx Ah Aeu

Condition: used, Year of construction: 2014, functionality: fully functional, Lamella press 13 m x 1.6 m x 240 with 2 decks Pjdpfx Aoxmvvljh Ajgu

Condition: excellent (used), Year of construction: 2015, Carcass clamp for pressing furniture carcasses, manufactured by the Homag-group, HOMAG AUTOMATION. With this pressing concept no prepositioning of the press elements is necessary. Vertical, horizontal pressure frames are powered electromotively and act as a self-lock via the trapezoid spindles. As crossing pressure lamellas process way to the inserted workpieces and ensure an all-over coating pressure construction on the carcass parts. Features • All-over coating pressing • Pressing surfaces with tolerance balance Pgsdpfexpfnijx Ah Aju • Pressing speed: 25 mm/s • Pressing power: 15 kn • Carcass length: 250 - 2.500 [mm] • Carcass depth: 250 - 700 [mm] • Carcass height: 150 - 1.400 [mm]

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system Psdpfx Aexg Dhcsh Aogu - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame Pgodjv N Uyrspfx Ah Aou

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / Horizontal Z = 1,000 mm / Vertical - Continuously adjustable NC swivel head, +/- 105 degrees, as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 seconds - Heidenhain iTNC530 controller, hard disk with approx. 21 gigabytes of free space - HSK100 motor spindle, speed range 20-8,000 rpm, drive power 44 kW, torque 350 Nm - NC rotary table SKH 4/630 Horizontal faceplate Faceplate diameter: 630 mm Standard height: 300 mm Indexing accuracy: +/- 12" Max. load: 900 kg Max. tangential torque at 63 bar: 2400 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis - NC rotary table SKH-NC 9/1450 Pgedpfx Ahjxgnfxj Aju Horizontal faceplate Faceplate diameter: 1450 mm Indexing accuracy: +/- 12" Without direct measuring system Max. load: 5,000 kg Max. tangential torque with clamping: 16,000 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing circle diameter: 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed working area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table, indexing accuracy +/- 5 degrees - Direct linear measuring system for X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Working area lighting, 6-fold - Mounting elements - 3D wireless measuring probe - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Unilok ESM 130 zero-point clamping system 36 units integrated in the machine table 16 units embedded in the rotary table faceplate (diameter 1450 mm) 4 units embedded in the rotary table faceplate (diameter 630 mm)